Just swapped out a 2150 lamp at 6200hrs. Things were getting pretty dim and muddy. Couldn't have been easier, and I suppose I didn't need the video, but I always appreciate seeing the process play out and making sure there aren't any unexpected surprises. So, thanks for your service!
I’ve had a bulb sitting here for at least three months since my projector bulb started nagging me. I’ve been too lazy to even bother until randomly seeing this video. Just did mine is less than 5 minutes and it’s awesome now. You rock dude. Subbed.
Thank you so much from Australia, this was a massive help, i couldnt work out how to get rid of the annoying reminder to replace the lamp. Great tutorial
Just a note for people - you HAVE to put that white plastic shield back on for the projector to project. At least for my EPSON Home Cinema 2150. I wanted to test it BEFORE I put the shield back on but it wouldn't even light up at all. Tried the OLD lamp and had the same behavior. After a lot of head scratching I figured it out.
This projector gets the job done pretty well. ua-cam.com/users/postUgkxS9P8zTOcmQg-hH0QeUi3dspOLyYgQ6dH Bear in mind it's a mini projector but all things considered the picture quality is pretty good. The attached photo is of the projector projecting onto my white closet doors. I still have not messed with the settings but I can't wait for our first family movie night on a larger scale. If you have issues with volume not working with your firestick, go into volume settings and you will find your solution there.
If the bulb is expired, will it prevent the power/standby button from illuminating? My power button does not light up even though the power is on and cable connected. Makes me wonder if my projector is simply fried.
Mine started blinking at ~4,500hrs, I reset the timer and left the bulb, it has been running the same for another 1,000hrs and still going. I bought a cheap Chinese bulb for $20 and surprisingly the projection looks identical, BUT there's an electronic noticeable annoying beeping sound. If I can get rid of the beeping sound it'd be a home run. I have the Epson 3020 powerlite home cinema.
Thanks for the video, in my EH-TW5650 the lamp worked 11900h, the lamp was still from the factory, and never changed, worked mainly in eco mode, up to 11500h the brightness in a fully darkened room was sufficient, the main decline occurred after 11500h-11800h approximately, while it was not comfortable to watch without the "normal" mode! It all ended with an explosion of the lamp with a pop at 11900h, the cooler at the same time worked to the full, the projector was hanging upside down, and was removed without turning over the case, then the old lamp was removed, there were a large number of small fragments in the lamp body with 0.1mm, so if the lamp went off, then do not turn the projector over, otherwise the fragments will fall into the interior of the matrix block and into the cooler. The projector and the lamp worked for 3.5 years, continuously for 8-10-12 hours, sometimes it did not turn off for days, it worked in the "TV" mode).
TW5650 is a great projector with almost every ports and features(casting,3D,2D to 3D conversion, native 1920x1080p resolution etc).i am using not more than 2-3hrs a day in weekend 5-6hr by 30min gap in between. but glad to know that you are using this as regular TV and haven't face any issue. Even my 2yr old LG oled C1 has not crossed 1500+ hours
@@FlyingFamily Yes, I use it as a regular TV, somehow the projector has worked 150 hours without a break, it works without repair, the total period on 2 lamps has already been 20,000 hours (62 months). I'm surprised myself how unkillable this model is. Once there was a jump to 400v in the 220V network, the projector simply turned off the lamp, a ballast error appeared, but after rebooting it worked as usual. I would be happy to change it to JVC d-ila, but I'm afraid that jvc will not stand this kind of work!)
You have a review on this projector? I've been going through UA-cam and can't find a legit review. There's many channels using the same voice-over on different videos and they all appear to be fake or planted "reviews" so they can link and sell from their affiliated link. Was hoping for a legit opinion if this is worth the current $600 price tag. - Thanks!
I've had it for a year and just got done testing it against 5 different 4k projectors that were $1200+ and to be honest, they weren't that much better than this one. And I got the 2100 for $500. So yeah, it's a pretty good projector. Only issue is it can get a little loud but if you're watching movies and playing games it's not noticeable at all.
then just drag the slider to the part you need lol? he didn’t have to make one at all but he did and it was really helpful all he even did was like explain why he ain’t taking it outta position and then compared the image at the end, even linked to where you can get a replacement bulb lol like it’s like an 8 minute video bro take some xanax or learn how to use the internet more effectively since you’re so busy. everyone’s a critic.
Just swapped out a 2150 lamp at 6200hrs. Things were getting pretty dim and muddy. Couldn't have been easier, and I suppose I didn't need the video, but I always appreciate seeing the process play out and making sure there aren't any unexpected surprises. So, thanks for your service!
I’ve had a bulb sitting here for at least three months since my projector bulb started nagging me. I’ve been too lazy to even bother until randomly seeing this video. Just did mine is less than 5 minutes and it’s awesome now. You rock dude. Subbed.
This may be one of the most helpful videos on all of UA-cam, thank you so much!
Thank you so much! I have the 3-LCD 2150. I got 8k hours out if my bulb and opted to change it. You made it super simple. Thank you!
Thanks, I finally changed my lamp that's been sitting there for MONTHS. I'd have done it sooner if I'd known it was gonna he this easy 🤦♀️
Thank you Felix, just watched your video and ordered a new lamp from Amazon. I'll follow up once I install the replacement
This is brilliant! Thank you for sharing your knowledge and skills. It is so kind of you!!👍👍👍
👍🏻
Thank you so much from Australia, this was a massive help, i couldnt work out how to get rid of the annoying reminder to replace the lamp. Great tutorial
Glad it helped
Great Video Didn’t know it was gonna be that easy !
This was very helpful, thank you!
Thx for the video. Mine one is time to replace too. It is easy to set up
Big help! Thank you for sharing!
Thank you for the video!
You're awesome dude.
Just a note for people - you HAVE to put that white plastic shield back on for the projector to project. At least for my EPSON Home Cinema 2150.
I wanted to test it BEFORE I put the shield back on but it wouldn't even light up at all. Tried the OLD lamp and had the same behavior. After a lot of head scratching I figured it out.
thanks for this video i have been dreading opening the whole project only to realise i only need to unscrew 4 screws thanks
thanks a lot...
Could you provide the link for the lamp in your video?
Thanks! 👍
I have a question about 880 and 2100, which one is better for me to buy now?
Exelente video, gracias que precio tiene la lámpara?
Thank you So much I got a Hopfrog projector & I don't even know where to start 🤪🤣❗️...
how come my two screws aren't screwing back in?? please help I don't understand
good brother
This projector gets the job done pretty well. ua-cam.com/users/postUgkxS9P8zTOcmQg-hH0QeUi3dspOLyYgQ6dH Bear in mind it's a mini projector but all things considered the picture quality is pretty good. The attached photo is of the projector projecting onto my white closet doors. I still have not messed with the settings but I can't wait for our first family movie night on a larger scale. If you have issues with volume not working with your firestick, go into volume settings and you will find your solution there.
I also had to go to menu/reset and reset the lamp hours!
Thanks for sharing and for the work and information. My lamp first information 4882 H. Best regards from Germany.
👍🏻
Thanks man, I have the 2150 but should be the same I imagine.
Yeh it was exactly the same process for my 2150. Note you HAVE to put the white plastic shield back on otherwise, it won't turn on.
How was that bulb? as good as the factory one?
If the bulb is expired, will it prevent the power/standby button from illuminating? My power button does not light up even though the power is on and cable connected. Makes me wonder if my projector is simply fried.
thank you for making this video, i put stickers all over my projector and couldn’t find the screw cause i covered it lmfao
😂 👍🏻
Mine started blinking at ~4,500hrs, I reset the timer and left the bulb, it has been running the same for another 1,000hrs and still going. I bought a cheap Chinese bulb for $20 and surprisingly the projection looks identical, BUT there's an electronic noticeable annoying beeping sound. If I can get rid of the beeping sound it'd be a home run. I have the Epson 3020 powerlite home cinema.
how do you reset the timer?
@@vile4794 on my Epson 2150 it is MENU --> RESET -->RESET LAMP HOURS.
Worked like a charm! Thanks
can u put high lumens lamp instead of the original lamp lumens?
What site did you buy the ball from and how much
The blinking lamp means replace soon u dont Need to replace it until the lamp actually goes out or it’s starting to go out such as discoloration
Thanks for the video, in my EH-TW5650 the lamp worked 11900h, the lamp was still from the factory, and never changed, worked mainly in eco mode, up to 11500h the brightness in a fully darkened room was sufficient, the main decline occurred after 11500h-11800h approximately, while it was not comfortable to watch without the "normal" mode! It all ended with an explosion of the lamp with a pop at 11900h, the cooler at the same time worked to the full, the projector was hanging upside down, and was removed without turning over the case, then the old lamp was removed, there were a large number of small fragments in the lamp body with 0.1mm, so if the lamp went off, then do not turn the projector over, otherwise the fragments will fall into the interior of the matrix block and into the cooler. The projector and the lamp worked for 3.5 years, continuously for 8-10-12 hours, sometimes it did not turn off for days, it worked in the "TV" mode).
Wow
TW5650 is a great projector with almost every ports and features(casting,3D,2D to 3D conversion, native 1920x1080p resolution etc).i am using not more than 2-3hrs a day in weekend 5-6hr by 30min gap in between. but glad to know that you are using this as regular TV and haven't face any issue. Even my 2yr old LG oled C1 has not crossed 1500+ hours
@@FlyingFamily Yes, I use it as a regular TV, somehow the projector has worked 150 hours without a break, it works without repair, the total period on 2 lamps has already been 20,000 hours (62 months). I'm surprised myself how unkillable this model is. Once there was a jump to 400v in the 220V network, the projector simply turned off the lamp, a ballast error appeared, but after rebooting it worked as usual. I would be happy to change it to JVC d-ila, but I'm afraid that jvc will not stand this kind of work!)
@@777Michas777 enjoy 😀
What is the voltage of lamp projector
Hi
I have a Epson EX5260 do you know where I can find a bulb?
www.purelandsupply.com/epson-projector-lamp_ex5260.html
I changed but the light is still blinking
Where did you get the replacement lamp from?? I need one for my future Epson HC 880.
Thanks
Get them from Amazon, they are $60 cheaper than getting them from Epson.
www.purelandsupply.com/epson-projector-lamp_home-cinema-880.html
@@terpmanjt1 The genuine one from Epson was $49. Now it's $59. If the one from Amazon is $60 cheaper, then it's free.
@@vile4794 the one I was looking at was $90 at the time and they were on back order.
I bought a stupid elplp 67 but my projector takes elplp 87 XD there is 150$ down the drain...
is it the same as Epson EH TW5600 ?
They are identical just different name. 2100 is US version, EH-TW5600 is international.
Do you have the link
www.amazon.com/ABITAN-V13H010L96-Projector-Powerlite-EH-TW650/dp/B08P5ZQ4W1
why it when bad!
You have a review on this projector? I've been going through UA-cam and can't find a legit review. There's many channels using the same voice-over on different videos and they all appear to be fake or planted "reviews" so they can link and sell from their affiliated link. Was hoping for a legit opinion if this is worth the current $600 price tag. - Thanks!
I been using this projector everyday for more than 3 years and I am super happy with it.
@@FixitFelix529 Thanks!
It’s a great projector and super easy to replace the lamp - this was the only video on UA-cam about this particular projector. Rock and roll, bro.
I have it, purchased it about a year ago. Really happy about it :)
I've had it for a year and just got done testing it against 5 different 4k projectors that were $1200+ and to be honest, they weren't that much better than this one. And I got the 2100 for $500. So yeah, it's a pretty good projector. Only issue is it can get a little loud but if you're watching movies and playing games it's not noticeable at all.
Did anyone else have a burning smell
This video could have been 20 seconds
then just drag the slider to the part you need lol? he didn’t have to make one at all but he did and it was really helpful all he even did was like explain why he ain’t taking it outta position and then compared the image at the end, even linked to where you can get a replacement bulb lol like it’s like an 8 minute video bro take some xanax or learn how to use the internet more effectively since you’re so busy. everyone’s a critic.
@@jarrodmaccartney2460 Your reply could have been 5 words