Bending the Hoops for my Backyard Greenhouse Part 5
Вставка
- Опубліковано 10 лют 2025
- I Bent the hoops or bows for my backyard greenhouse hoop house and now have them installed. I used my greenhouse bow bender to make the bows and now have them installed. It is finally starting to look like a greenhouse now!
Here are the Amazon Links to some of the items I used
DeWalt DCD771: amzn.to/2uFuBsh
DeWalt Magnetic Drive Guide Set: amzn.to/2CJVH61
Tek Screws: amzn.to/2XD3ltm
Dramm 400 AL water Breaker Nozzle : amzn.to/2XWypWd
Dramm 36” all Aluminum Rain Wand: amzn.to/2XYmIyc
Check me out on Social Media
Facebook: / grownewplants
Instagram: / grownewplants
Twitter: / grownewplants
#rootmaker
This is the best video of this kind of pipe bending so far.
Great, thank you!
That's awesome man. Straight forward with time lapse to show what kinda stuff you are gonna be doing. Good tips. Great work!
Thank You, I appreciate it!
Glad the camera is back.
Yes! Felt good to get back working on greenhouse!
Great job. I bought a Jiggly green house kit. It uses the same brackets and was not 100 percent sure on how far down to put the archers in and where to use what screws as the kit doesn’t have any instructions at all. That’s right a whole green house kit with out 1 instructions. You can go to the website and look at about 4 or 5 pictures. So thank you for your video
Perfect timing as we were installing the hip rails today
Glad it helped, There is no exact depth, I just calculated all my stuff out and that's what I ended up with, good luck on your greenhouse!!
yes!! been waiting for this! 👍
Great Neva, Glad you waited for it, happy to be filming it again!!~
Where did you get the brackets for the hip wall securing the base poles?
Thanks for the informative video's of how you built/are building your greenhouse. How tall are the side and corner posts? My guess is 5' or 6'. And did you use these posts so that you would have 3' of straight wall
before the hoops, so that you would not have to bend over as much on the sides if you use racks ?And did you drive them about 2' deep ? It looks like the greenhouse is about 10' tall at the center. I probably will use shorter side posts so that the overall height is less.
Thanks for taking the time to put this series together.
You are pretty close, I guess I never said in the video, The side post are 6' 6" long, the space between the baseboard and the hip board is 36" The post are 41" above the baseboard, so each post is driven a little different depths depending on if they are on the high side or the low side of the land, but on average they are driven 2.5' to 3' into the ground. I did make the side wall a little higher so I would have room on the side for my beches and some growth without them getting into the plastic, The overall height is about 10' too. I appreciate you watching!!
What the DEGREE bend is the hoop
Great video and new to the channel. Are you looking to start a business or is this just a hobby? Thanks!
It is something I just enjoy doing but I hope to eventually make some money doing it too