Chin up brother / I worked with my dad and now my 3 sons work with me - even my grandson comes in on the trowel so 4 generations of us sullivans. Keeping brick laying going 👍 you go steady mate and God bless 🍀
Had a mate down here in Australia and he had a mate who was a midget brickie. Used him all the time to get up to damp then my mate did all the cream work.
i am a 70 year old retired bricklayer and was taught to keep full perps. for a so called traditional bricklayer, tipping your perps is not a good practice to pass on to your son
God bless you Dean another great video......but please don't hit your level , I used to get a bollocking for that ,bad habits and all that mate . Great job lads .
Brilliant. Young lads on the Hod/monkey and laying bricks with the London pattern trowels and not a plastic muck board in sight old School. Fantastic 👍👍
Great bricklayer but you seem to not be filling some perps full enough with mortar. Water ingress could fill the joints and could freeze and create issues. Quickness is great but proper full beds and perps are important. Your a legend bricklayer though.
Not a good one buddies, looking at that chimney you still digging those joints, I keep telling you cut off bit of tile baton! and you forget a pencil ✏️ tomorrow your be sent home!
Hello mate, question for you if Pos thinking about Having exposed brickwork inside a barn ( bungalow but large ) gable end looking out vaulted ceiling . So will have black frame windows Black roof and so on .Its solid built but not the best looking so might end up cladding the outside not 100% as of yet . But want to use a stock inside what’s your thoughts would you go with? Reds or yellows or can I mix them or is that not the done thing ??want some with a bit of paint on black and so on . Also, would you do headers over the windows 🤯
When you set that deadman block, was it to avoid sag in the brick line? If so, how do you gauge that if the foundation or block work below you brick course is not perfectly level?
You say thermally it’s not good to have concrete blocks externally and thermalite internally.? What about when you use brick externally.? No difference surely.?? I see your using a lightweight concrete block, where’s that going.?
Wat you mean the sites I keep getting calls about to take over Knock back 3 new build sites average a month You must be the reason new builds for such a good name at min 😂 Look at you’re own garden brother before looking in myn
Очень гряная работа! Третья часть раствора падает на землю , не профессионально . Грубо и загрязненно после 3 рядов кадки! что будет после 30-ти рядов!?
How I miss laying bricks with my son and my brothers, 74 now.
Chin up brother / I worked with my dad and now my 3 sons work with me - even my grandson comes in on the trowel so 4 generations of us sullivans. Keeping brick laying going 👍 you go steady mate and God bless 🍀
@@shanesullivan5656 And you too mate👍
Had a mate down here in Australia and he had a mate who was a midget brickie. Used him all the time to get up to damp then my mate did all the cream work.
Well done dene nice to see the young lads laying its the only way they will get experience and to learn from a pro keep up the good work mate 👍
🎉 much better Dean! Just pure talent and experience of plying your trade!! Plus teaching the younger generation too! I prefer these videos mush!!
Proper lad not many of us left 👍
Proper fellow old school only Chanel I follow now keep it up and god bless you my friend ❤
Thank you sir
Hope you’re well
Charlie collision 💥
I’m 72 still going strong returning :is for the birds. Joe Scotland
Lovely jubilee once again good man 🍀👍
Been laying bricks for at least 40 years and still come home and now watching you - ain’t normal are we 😂🍀👍
@@shanesullivan5656we all do it mate ,we are normal the rest anit ✌️
Great work,as usual enjoyed that...cheers
i am a 70 year old retired bricklayer and was taught to keep full perps. for a so called traditional bricklayer, tipping your perps is not a good practice to pass on to your son
Another big job dean .
17:00 .... that pier will be cover with dirt? ?everything is crook.....no bed joint....big joint just the last one at 18:00 that look alright
Good Man keep do what you doing 🏗️🏫🏫🏫🏫🏫
Running it like a army champ 👌
Great work there dean mate keep these videos coming, DanHillCigars 🙏🏻🤜🏼
Who’s put them boards so close to the wall 🙈 good work as always keep the videos coming.
Can’t wait to see it finished 👍
Very good work
God bless you Dean another great video......but please don't hit your level , I used to get a bollocking for that ,bad habits and all that mate . Great job lads .
I know mate so bad …I even got 1 with guards on 😂😂
Brilliant. Young lads on the Hod/monkey and laying bricks with the London pattern trowels and not a plastic muck board in sight old School. Fantastic 👍👍
Well said sir
London lad up norff. Still house bashing at 64 🤣 .
Monkey?
Great bricklayer but you seem to not be filling some perps full enough with mortar. Water ingress could fill the joints and could freeze and create issues. Quickness is great but proper full beds and perps are important. Your a legend bricklayer though.
Yup, I noticed that - a lot of his perps looked half empty to me. Stopped watching after that 👎
If you’d used profiles you’d of had that done by 2pm Deano 😂
Great video and channel.
Why cant you have concrete block outside and lightweight blocks inside skin?
How long till the cement is dry between the bricks??
Good boys🏫
Not a good one buddies, looking at that chimney you still digging those joints, I keep telling you cut off bit of tile baton! and you forget a pencil ✏️ tomorrow your be sent home!
yur lucky one foundation s done already omg itu gobshite
Hi, which Kind of mortar Do you use?
In Germany is much more cement in there. In England it looks like wet Sand 🤔
Greetings from Germany
For cement based mortars regarding general brickwork the ratio is 4:1 or 5:1... Sand:Cement.
Same here, looks nonetheless different.
Thank you four the answer. 👍
@krautersammler8080 most likely the different sands. I'm in the the north of England and our mortar is a different colour to the south of England.
@@CumbrianMush that could be the solution. 👍
Have a good Day 🙋🏼♂️
Never did get me coin lol. Wot mix is it you use can I ask. Please Dean
👍👍👍👍👍
Tapping your levels its a no no for me .
Hello mate, question for you if Pos thinking about Having exposed brickwork inside a barn ( bungalow but large ) gable end looking out vaulted ceiling .
So will have black frame windows Black roof and so on .Its solid built but not the best looking so might end up cladding the outside not 100% as of yet . But want to use a stock inside what’s your thoughts would you go with? Reds or yellows or can I mix them or is that not the done thing ??want some with a bit of paint on black and so on . Also, would you do headers over the windows 🤯
Multi stock is your answer brother ,red and Oakes mixed in with line and white sand
🤜🏻🤛🏻 thanks mate
When you set that deadman block, was it to avoid sag in the brick line? If so, how do you gauge that if the foundation or block work below you brick course is not perfectly level?
Can always check with the laser level what the middle is saying
@@thomashinsley-zx5uf not got that sort of kit unfortunately, I’m only DIY.
@@simonburch8762 transfer the level onto pegs with a 6 foot level
Bom dia irmão . Acompanho teus trabalhos aqui do Brasil 🇧🇷🇧🇷🇧🇷🇧🇷 . parabéns seu trabalho maravilhoso te desejo muita saúde sucessos sempre abraços !
No radio?
Looks like your trying to hard to be quick for the camera and not on the quality.
Thermo no good for casting, they dot and dab these thermo internals too cover the cracks!!!
You say thermally it’s not good to have concrete blocks externally and thermalite internally.? What about when you use brick externally.? No difference surely.?? I see your using a lightweight concrete block, where’s that going.?
I’ll do a video on it mate when I get time
That was a back breaker. Not for the weak minded.
Rough as toast this brickwork.have you been on the beer or do you not like wearing glasses .wouldnt last five minutes on a building site my old china.
Wat you mean the sites I keep getting calls about to take over
Knock back 3 new build sites average a month
You must be the reason new builds for such a good name at min 😂
Look at you’re own garden brother before looking in myn
@@thetraditionalbricklayer9650show us your gold bricklayers card mate,that's if you have one😅
Ali from🇬🇧
🏗️🏨🕌🏨🕌🏨🕌🏨🕌🏨🕌
Could have done with you on a job today the customer could have done with Tony Robinson rather than a bricklayer. Wanted to know end of cats arse 😂😂😂
Hala madrid 😂🫡
Очень гряная работа! Третья часть раствора падает на землю , не профессионально . Грубо и загрязненно после 3 рядов кадки! что будет после 30-ти рядов!?
You wan"t to learn how to put perps on brick
All i know is you must be doing something right because you’re still getting plenty thrown your way
Just. Honest mate even on here