Conversion 35cm hand-launch airplane to RC micro airplane
Вставка
- Опубліковано 14 жов 2024
- I converted the cheap Banggood hand-launch airplane to the RC micro airplane.
Gliding test : • Micro RC Airplane glid...
weight : 46g/w 2s battery (55g at FPV)
wing span : 35cm
flight time : 10min - 20min
Banggood : www.banggood.c...
Thanks for your Video.......You're a genius.
How can the other side move when Aileron only walks on one side?
How do you connect the elevator to servo arm?
It is needed to connect both side aileron. The elevator is connected with the other side by a wire.
@@mode8181 Thank you for kind reply. I admire the practical implementation of the idea.
@@true21cwoo OK, enjoy flying.
Perfect plane! I try to do the same, but something is wrong with my thrust angle, the plane crashes. Can you show photos of the motor mount. How do you choose the correct angle for a powerfull motor? Please advise!
You are a genius man!
За музыку отдельный лайк!
Cool built❤, in the moment I'm busy with an similar Project and Now i try to use some of your Tips ,too. Thanks a lot and nice greets from germany👍👍👍
Good luck!
Nice. Very clean built.
I plan to do the same conversion - maybe with the bigger 48cm glider.
Can you please show the motor mount in greater detail? How are the servos mounted (glue? which one?). I also like the way the rudders are hooked up to the servos. Can you maybe upload a view detail pictures. Thank you very much :-)
OK, I'll upload view detail.
Please provide all information such as motor size (and KVA) and stepper motor etc...
Wow, this is very interesting for many reasons. Great flight time and gliding. I have many versions of these chuck gliders and parts. I also have this Jumper TX so I'm checking out the R9M module and RX. What is the FPV cam? Thanks for sharing.
My FPV equipment is made by following parts.
(Ldark micro camera, 5.8Ghz 200mw TX module、 leaf antenna and 3.3V DC-DC converter)
All FPV equipments weight is 8g.
@@mode8181 Thank you so much. I'm hoping the r9m module is plug and play on the Jumper - there is no info on the deviation site or anywhere else for that matter. I really like this approach to FPV - very clever and fun. Thanks again.
You can find information about R9M support with deviation Jumper TX , where Deviation Forum > Development > Protocol > PXX protocol.
@@mode8181 Oh yes. Many thanks from your new subscriber.
@@mode8181 Do I need to use a Taranis TX to download/flash firmware to the R9M module and R9MM rx?
Excellent work!
Sir how much if order this product?
What is the prop size and esc?
The prop size is 3x3, and esc is 2s 6A.
the use of MODE 1 radio equals WHY.
In my country, MODE1 is standard.
If it were possible to make it 55 grams it might work
How many gramm your servo in this micro airplane?
Hi, 2g with cable (1.7g without cable).
Cold I use a small 22000kv brushless motor
Yes. But you will want more power(^_^;)
nice video, Wonderful music
what name of this music please???
You may be able to find the music at following site.
But sorry in japanese. (-_-;)
musmus.main.jp/english.html
Moosa
Zaryab
4000kv! Whaaaaat!
What's your tx and module
My TX is Jumper T8SG V2.0 Plus Carbon Edition.
It has internal 4 in 1 multi-protocol module and it can be installed external JR type module.
I install Frsky R9M module.
u used ppm or sbus signal
I use ppm. Receiver is R9MM, and 4ch ppm.
(AIL, ELE, THR and LED/Buzzer control)
it is very fast
Moror details
This clip sucks and the music is terrible
You couldn't find the mute button?