The video is helpfull for revise purpose...but those who are new one ,lack of concept,for them need more explaination & slow teaching...unless they can understand properly
The width of landing should be equal to the width of the flight. ( Minimum ) Also, i would recommend that you should design the staircase first and allocate space required as per floor height first... Would not recommend trying to "fit" in a staircase in a pre_defined space as mentioned in your video. Also, the width of the flight is dependent on the building type. Development Control Regulations have to be referred to to check if the staircase is as per regulations.
Thanks a lot Very useful Can you please upload the video for beam and column load calculation Beam and column design for a building construction Please Please
Excuse me can you tell me when you get tread standard that say it shall not be less 220 mm, because I design stair that i should put 230 mm for tread, because that i want to prove that my tread is enough, and not small, that why i want to know where you get that standard that say it is ok minimum of tread 220 mm.
You are a good teacher.. thank you Sir
Explanation way is very good👍👍👍
Thanks, so helpful
Wow it is nice and clear lecture keep it up!!!!
The video is helpfull for revise purpose...but those who are new one ,lack of concept,for them need more explaination & slow teaching...unless they can understand properly
That was very useful thank you!
The width of landing should be equal to the width of the flight. ( Minimum )
Also, i would recommend that you should design the staircase first and allocate space required as per floor height first... Would not recommend trying to "fit" in a staircase in a pre_defined space as mentioned in your video.
Also, the width of the flight is dependent on the building type. Development Control Regulations have to be referred to to check if the staircase is as per regulations.
Nice sir, but highly technical
Hi, very knowledgeable and helpful videos.can u pls make videos on types of glass used in glazing works and aluminum sections also.
Thanks a lot
Very useful
Can you please upload the video for beam and column load calculation
Beam and column design for a building construction
Please
Please
Which design is space effective ?
sir what if the nmber of risers has a value of decimals? like mine i have a value of 11.67, should my no. of risers be 11?
Nice
Excuse me can you tell me when you get tread standard that say it shall not be less 220 mm, because I design stair that i should put 230 mm for tread, because that i want to prove that my tread is enough, and not small, that why i want to know where you get that standard that say it is ok minimum of tread 220 mm.
What is lobby in stair case?
Stair anticlop wise nhi hote he ser ulte hatt se relling pakad kar ch de ge kya
Tq sir
For length of flight u can't take 2.25 it's wrong it varies
Plz design 3 nos a staire case
U can't get the 4.5m by adding all the dimensions pls check once
Who the fuck click unlike bottom....