delivered a lot of machinery on 4 axle rgn years ago. most shippers and receivers loaded and unloaded, once in awhile did load and unload, we were busiest in the fall, winter and early spring, construction machines had to be on site for the for spring, summer and early fall, made our summer traffic slow, that is when we took time off, nice video Steve, pull toy here
I had no idea that separating the trailer was so involved. I guess that I've never seen that model until today. Learned something new....to me . LOL Nice video. : )
Great shot of the rolling coal. And I would have never thought about the wind making the turbo spin on the excavator. Good to know, thanx. Great video.👍
In order for the turbo to spin, there has to be a way for the air to exit the other side. So, if the air is moving through the engine while it's off, the engine's blown up anyway. Water getting in the pipe, is a different story!
Good video again that was a good shot blowing Black coal my friend I see you were you had duck tape on the exhaust pipe on the excavator some people would not know why you did it but I do that keeps the turbo from turning without no oil in it that will burn it up be safe
If I was going to do that kind of trucking & hauling I’ll be damned I would have the most modern & efficient & easy to use low boy trailer on the market I don’t care the cost even if it saved me one minute procedure make the job as easy & safe as possible
Voice synthesizers sometimes gets confused I mean the program just does what it thinks it does what but dragging cars you must understand that the motor RPMs peak at certain horsepower the maximum horsepower per RPMs doesn't mean the maximum horses 9,000 RPMs doesn't means you got the most horsepower study the engine then know when to shift it to get down the track faster
When your Drake cards you got to study your motor you got to understand your motor pizza at a certain time and RPMs to shift the gears you need to get on the gears a little faster get that car down there straight
Teaching your son the business: Priceless!
Brings back good memories. I miss hauling open deck and swapping from trailer to trailer. Orville handled that load like a old hand. 👍
delivered a lot of machinery on 4 axle rgn years ago. most shippers and receivers loaded and unloaded, once in awhile did load and unload, we were busiest in the fall, winter and early spring, construction machines had to be on site for the for spring, summer and early fall, made our summer traffic slow, that is when we took time off, nice video Steve, pull toy here
Hey Steve, I passed a burgundy Wedmier T680 on the NJ turnpike head south today carrying army equipment! 10-4-21
Great video Steve love the part of rolling coal that was great. Looking forward to the new FSC Speed shop channel.
I had no idea that separating the trailer was so involved. I guess that I've never seen that model until today. Learned something new....to me . LOL Nice video. : )
That's why they get the big bux!!!
@@hughstephenson2957 Deserved for sure.
It's because of the trailer he has. Its mechanical. A hydraulic or pto lowboy is way easier, faster and simpler
@@Livefree902 However those newer ones have more things to go wrong and make it useless. This one doesn't have those faults.
Yes need daily dose of Semi Trucks
Just think of how the list of things you have driven grows on most jobs. How many people get to say they drive firetrucks without being a firefighter?
Good video but I think you forgot Matt at the end.😁
Great shot of the rolling coal. And I would have never thought about the wind making the turbo spin on the excavator. Good to know, thanx. Great video.👍
In order for the turbo to spin, there has to be a way for the air to exit the other side. So, if the air is moving through the engine while it's off, the engine's blown up anyway.
Water getting in the pipe, is a different story!
Hello buddy . Thanks for this great and informative video. I hope you are always successful and healthy 👍
Hellow Steve good to see you again tell Matt I said hay
The monster machines in the earth, love watching JCB.
What size /grade chains do you like to use? Also any tips on caring for ratchet binders?
These are 1/2 inch rated at 15k lbs. Keep the binders lubricated.
Smallest chains I use is 3/8 grade 7. Always chain the axles when possible and keep WD40 with you at all times for lubrication of the binders.
what's the top speed on those Excavators? about 20 MHP or more?
Not much better than a brisk walk.
Are you using a super 10 transmission in your Pete?
Eaton-Fuller 13 speed
just love that truck.Am from the uk and we dont have anything like that
Great job! Very cool! Matt learning the biz! cool!
That was some great coal footage it would be great if you state the Nutritional value of that black coal
Good video again that was a good shot blowing Black coal my friend I see you were you had duck tape on the exhaust pipe on the excavator some people would not know why you did it but I do that keeps the turbo from turning without no oil in it that will burn it up be safe
Excavators make great go pro great selfie sticks!
👍👍
If I was going to do that kind of trucking & hauling I’ll be damned I would have the most modern & efficient & easy to use low boy trailer on the market I don’t care the cost even if it saved me one minute procedure make the job as easy & safe as possible
Nothing better than driving heavy machinery.
Stay safe an keep up the good videos
Where is the bucket?
Hey Matt!
Stuff like this makes me want to get my CDL and be a truck driver
Great video eh Steve
That looks sweet seeing that coal roll out
Voice synthesizers sometimes gets confused I mean the program just does what it thinks it does what but dragging cars you must understand that the motor RPMs peak at certain horsepower the maximum horsepower per RPMs doesn't mean the maximum horses 9,000 RPMs doesn't means you got the most horsepower study the engine then know when to shift it to get down the track faster
When your Drake cards you got to study your motor you got to understand your motor pizza at a certain time and RPMs to shift the gears you need to get on the gears a little faster get that car down there straight
just curious who was the camera guy!
Matt was the camera guy
Summ, summ, summ, Bienchen, summ herum
Tracked equipment, out from a flatbed…
I’ll pass… even if I’ll looked like Vin Diesel too…
FSC SPPED SHOP? That was a bit of a typo.
Shit happens
I would sometimes unload the track how sideways and never unhook