Huben K1 - Accuracy Testing with JSB Hades Pellets

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 27

  • @redgum1340
    @redgum1340 Рік тому +1

    Great idea for the pellet trap, I may make one myself to recover the shrapnel and reuse the lead.

  • @Simo260681
    @Simo260681 Рік тому +1

    Good video mate 👍🏻

  • @brynybach7741
    @brynybach7741 Рік тому +1

    Love the new pellet catcher. I've just given an old gas tank like that away as well. If only I had seen this first ☹ What is the car by the way only I can't recognise it. Looks like fun, all wheel drive?

    • @5euk
      @5euk  Рік тому +1

      It's a one off limited edition Jeep Wrangler. 👍🏻

  • @Tom-jw1pe
    @Tom-jw1pe 15 днів тому

    How many clicks and regulator pressure?

  • @kiteboardkid
    @kiteboardkid Рік тому

    Is the Huben K1 noisy like the Edgun L2 due to the self indexing exhaust ? The one thing I don't like about my L2 is you can't get them very quiet because of this..

    • @5euk
      @5euk  Рік тому

      The K1 is very quiet mate.
      Nothing like an L2.

    • @kiteboardkid
      @kiteboardkid Рік тому +1

      Good to know thanks Lee. Keep up the great content, more from the K1 at longer ranges please 🙂

    • @5euk
      @5euk  Рік тому

      I'll be posting some Huben GK1 content once my new one arrives so keep a watch out.👍🏻@@kiteboardkid

    • @kiteboardkid
      @kiteboardkid Рік тому

      @@5euk thanks but pistols don’t interest me.

    • @5euk
      @5euk  Рік тому +1

      @@kiteboardkid Me neither until I saw the new Huben one. 👍🏻

  • @dkknight8084
    @dkknight8084 Рік тому

    How do you mess up a silencer it's a straight tube

    • @5euk
      @5euk  Рік тому

      As the shroud of the gun is carbon fibre ,if you apply to much pressure when twisting the silencer on/off you could easily damage it so best to be safe and use the correct tool.

  • @normangilden3453
    @normangilden3453 11 місяців тому

    How did you make your old propane back stop ???

    • @5euk
      @5euk  11 місяців тому +2

      With a little bit of patience.

  • @pipzza6733
    @pipzza6733 Рік тому +1

    nice video, I get the same results at 100 meters. The distance you are shooting at is like nothin for this gun. Very entertaining vid anyways, thanks

    • @5euk
      @5euk  Рік тому +1

      I’ll be doing more videos at different distances soon. 👍🏻
      What calibre and power is your gun ?

  • @OriginalMarkyBoy
    @OriginalMarkyBoy Рік тому +1

    Let’s see the rear of ya pellet catcher 😊 any damage? 😊

    • @5euk
      @5euk  Рік тому +3

      None what so ever. It is double the thickness and has the chains in front of it. If you look at 3:05 you'll see where I was scoping in, some scratch marks where a few stray pellets hit the front. Bearing in mind that the front is not double the thickness or has the chains in front of it is a good indication the rear won't even get marked. 👍🏻

    • @OriginalMarkyBoy
      @OriginalMarkyBoy Рік тому

      @@5euk we need pics 😝

    • @OriginalMarkyBoy
      @OriginalMarkyBoy Рік тому +2

      @@5euk we had thin stainless one years ago, and where the pellets kept hitting in the same position it stretched a nice big crater in the rear 😊
      Them chains work a treat buddy 😎

    • @5euk
      @5euk  Рік тому +2

      @@OriginalMarkyBoy The rear of the canister is double the thickness as the part I cut out of the front is stuck to the inside. My mate who has a 90 Fpe airgun was also shooting it and even that didn't mark it. 👍🏻

  • @mogamedfakier4800
    @mogamedfakier4800 Рік тому

    Good shooting with tje Hades is that Huben sub 12 ft ?

  • @jeroenakkerdaas75
    @jeroenakkerdaas75 Рік тому

    Nice! With what pressure and velocity are you shooting?

    • @5euk
      @5euk  Рік тому

      Regulator set at 130 Bar, shooting .25 calibre 26.54 grain pellets at 11.9 fpe.

    • @Sss..463
      @Sss..463 Рік тому

      How many feet exactly