+centerstage entertainment sound quality definately an improvement over NU. I remember testing NU at 8 ohm load. It sounds so thin. If you put 4 ohm, it sounds so much better. NX do not have this problem.
HI i have bi amp tops . As written in the instructions, I connected them in the speakon +2 - 2 connector, channel A works for me, but channel B does not work, channel B can only work in the speakon B + 1 -1 connection?
yes. that how it works. addition parameter to set is the hold time and release time. Just set how long the limiter stays working after triggered by first peak over 400w. and how long the limiter being release after the signal output lower than 400W. cool right?
@@ericcheesaihoo thank you for answering my questions, but I still have my doubts, that function only works in the Behringer app or i can put that only using the Behringer amplifier DSP, and,If I put a 400w limit on channel A, if I turn the A knob all the way up, it is going to deliver the 1100 watts RMS of the amp but with the 400 watts limiter, or, its going to deliver only 400w RMS that I set on the Behringer app/DSP.
if you put limiter on 400w. your maximum output when turn up all at the knob, it will be 400W. if you do not use the app, you can set it with the button at the front panel. app make life easier because of the GUI
is this amp still run smoothly? i have 2 tamp tsa 4 700, but the behringer it.s more cheaper. i.m affraid to put it in my speakers. i have pro speakers so if it leaks a lil DC to them i.ll regret a lot.
I use 2 or 4 of them (nx6000)...one was broken (power supply), but it was replaced by Thomann (Germany) very fast!! ..i think they are really great for the prize, sound its ok, power levels are acceptable, but no way better than an old Macrotech, QSC or Carver :). They weight nothing and are extremely light and efficient, and the DSP is really good and easy to work (Software or via the knobs). Entendido Jefe? :)
@@ericcheesaihoo In germany its quite stable, but i was at that time in a hall with big maschines that consumes a lot of energy....maybe it was a random situation.
thanks eric just got to study the dsp settings next as I have never used a power amp before always used active speakers it would be great if you could do a tutorial on how to set up the speakers going through the dsp settings once again thanx paul
I have an NX1000D. Didn't know about the software for computer control. This is interesting so thanks for the video. Any chance you can help me with something else? I forgot my password. I've tried every combination that seems likely and none work. Can't remember what I used for the life of me. Any way to overcome this?
I downloaded the edit software and when I connected my amp to the computer the software showed my my password. Problem solved! Without seeing your clip I would not have know about the software so thank you.
Hey Eric chee, what is the best settings running dual with 2 15" 2-way speakers and 18 behringer sub daisy chained channel a and channel b identical speaker setup?
This configuration you can't even can set crossover point. What you can do is just aet the EQ to correct the deficiency of the loudspeaker and a limiter for protection
@@ericcheesaihoo what configuration do I need to set to use the crossover with the way I have my speakers set-up, or tell me with the speakers I have how should I run them to the amp to get the best out of them?
This walk through helps out a lot, apricate the video!👊💯
Glad it helped!
Can i update the setting in the amp its Lcd screen with out a pc is it necessary to hav a pc to update its setting
Hi Eric, is the NX series reliable? For example, with the NX6000, is the 2x218 Sub stable for live music?
Suggest go for class td amplifier for durability and low cost maintenance
@@ericcheesaihoo Do you think (NX6000) >140 damping factor is enough for 2x18" bass in live music?
@@sesburada nope, the performance will not definitely satisfy you
@sesburda did you ever get an NX6000?
@@justinmanny86 No, I Bought Studiomaster Amplifier
besides the DSP and the software, whats the difference between this and the behringer inuke 6000?
+centerstage entertainment sound quality definately an improvement over NU. I remember testing NU at 8 ohm load. It sounds so thin. If you put 4 ohm, it sounds so much better. NX do not have this problem.
I think the NX is more true to power than the nuke. I always hear how it's wattage isn't actually 6000
HI i have bi amp tops . As written in the instructions, I connected them in the speakon +2 - 2 connector, channel A works for me, but channel B does not work, channel B can only work in the speakon B + 1 -1 connection?
So, i have behringer speakers with 400 rms, i can put an peak limiter off 400w in channel A of B in the behringer app?
yes. that how it works. addition parameter to set is the hold time and release time. Just set how long the limiter stays working after triggered by first peak over 400w. and how long the limiter being release after the signal output lower than 400W. cool right?
@@ericcheesaihoo thank you for answering my questions, but I still have my doubts, that function only works in the Behringer app or i can put that only using the Behringer amplifier DSP, and,If I put a 400w limit on channel A, if I turn the A knob all the way up, it is going to deliver the 1100 watts RMS of the amp but with the 400 watts limiter, or, its going to deliver only 400w RMS that I set on the Behringer app/DSP.
if you put limiter on 400w. your maximum output when turn up all at the knob, it will be 400W. if you do not use the app, you can set it with the button at the front panel. app make life easier because of the GUI
can the limit go down enough to control dj's turning the mixer too high?¿
Yes.
What usb does it use
can u send link to download software. cant find it on there website.
here m.musictribe.com/Categories/Behringer/Power-Amplifiers/Portable/NX6000D/p/P0CHX/downloads?active=Downloads
@@ericcheesaihoo im sorry bro...website can't open how???
I'VE DOWNLOADED THE APP ON MY PC BUT IT KEEPS SHOWING OFFLINE EVEN AFTER I CONNECT THE USB TO THE NX-6000D. ANY SUGGESTIONS.
Try other usb port and even other laptop usb
OK I'll try that
@@professordexter i have the same problem it doesn't want to connect
is this amp still run smoothly? i have 2 tamp tsa 4 700, but the behringer it.s more cheaper. i.m affraid to put it in my speakers. i have pro speakers so if it leaks a lil DC to them i.ll regret a lot.
So far I sold more than 10 units, no issue so far.
I use 2 or 4 of them (nx6000)...one was broken (power supply), but it was replaced by Thomann (Germany) very fast!! ..i think they are really great for the prize, sound its ok, power levels are acceptable, but no way better than an old Macrotech, QSC or Carver :). They weight nothing and are extremely light and efficient, and the DSP is really good and easy to work (Software or via the knobs). Entendido Jefe? :)
That's too bad to hears. Mind to know how stable in the incoming voltage in your place?
@@ericcheesaihoo In germany its quite stable, but i was at that time in a hall with big maschines that consumes a lot of energy....maybe it was a random situation.
When i set 4ohms it doesnt save it. When i log back its back to nothing
You does not set the 4 ohm. 4 ohm come from looping two units 8 ohm speaker
Software doesnt work on my Windows 10 Laptop ... Try it on my windows 7 laptop and it worked perfectly can you please assist me
you need to contact behringer for that
How is the amp performance to this day
Nice
can I run 2 8ohms speakers each side by daisy chaining them together cheers paul
Yes
thanks eric just got to study the dsp settings next as I have never used a power amp before always used active speakers it would be great if you could do a tutorial on how to set up the speakers going through the dsp settings once again thanx paul
All stock sold.. Nothing for me to make video at this moment
I have an NX1000D. Didn't know about the software for computer control. This is interesting so thanks for the video. Any chance you can help me with something else? I forgot my password. I've tried every combination that seems likely and none work. Can't remember what I used for the life of me. Any way to overcome this?
I downloaded the edit software and when I connected my amp to the computer the software showed my my password. Problem solved! Without seeing your clip I would not have know about the software so thank you.
I am late. 😩. Yeah your way is correct way to reset it
what is the rms power output?
Nx6000d is 2x1600w 8 ohm
@@ericcheesaihoo dynamic. 600w cont
How can I transfer NU program to NX?
Unfortunately I do not have NU program to test it out. If you have NU program, you can send to me to test it out at NX
change the .arp file extension to .nxp
Hey Eric chee, what is the best settings running dual with 2 15" 2-way speakers and 18 behringer sub daisy chained channel a and channel b identical speaker setup?
Do you mean a double 15" daisy chain to a single 18" sub for a channel?
@@ericcheesaihoo I'm sorry I'm running the configuration in stereo and the speakers are 2 - 15" 2-way and a B1800X pro sub 18" daisy chained per side?
This configuration you can't even can set crossover point. What you can do is just aet the EQ to correct the deficiency of the loudspeaker and a limiter for protection
@@ericcheesaihoo what configuration do I need to set to use the crossover with the way I have my speakers set-up, or tell me with the speakers I have how should I run them to the amp to get the best out of them?
You need another amp just for your subwoofer