One of my personal favorite documentary films about steam locomotives and this is the first film that I had ever seen relating to the Union Pacific "big boy" type locomotives, it is interesting to observe the operation of railroads over 60+ years ago.
In Aug 1998 my son and I were driving back from Phoenix to his new job in Johnson City Tn. We stopped in Memphis (I wish Id marked the date) for the nite and got to talking with a man in the motel lobby. Dont remember how RRing came up but he had been an engineer for one of these behemoths, and I had only been a lowly B&O machinist. Do you have any idea how humbled and honored I felt when I offered and he shook my hand? To shake the hand of a man who had been Captain in command of one of the largest "land ships" ever built.??
I first saw this when I was a child. Now almost 25 years later I still find it amazing. Man I remember when I first saw that cartoon... mister mallet cutting and reassembling his machine. I was blown away. So good of you to preserve this.
Even i had difficulty finding this on UA-cam after i lost The VHS recording of this film. So Glad that BBR has preserved this film even if loco 6597 had a somewhat split number personality.
Truth is; all the railroad companies couldn’t wait to scrap those maintenance hungry teapots and get them gone. Diesel fuel was 6-8 cents a gallon and the diesel locomotives required very little maintenance in comparison. The cost savings were enormous….which meant higher profits. I spent nearly 27 years as an engineer and never once regretted that I missed the steam era. Those engines were filthy, hot in the summer and drafty in the winter….I worked with many steam men back when I started. Not a one of them missed steam engines. Nostalgia is one thing, practicality another. The same logic applies to modern jet aircraft as opposed to the old radial engined propeller planes. A bit of trivia: the steam men told me the C&O T-1’s ….2-10-4’s were powerful brutes but rode horrible. On the other hand, the articulated H8 Alleghenies rode like Cadillacs. And I remember as a kid the C&O 614 Greenbriar sitting derelict behind the Russell, KY roundhouse along with three 2700’s. I got climb up on them back in the 60’s and they were just rusting hulks. 614 got saved but the 2700’s went to the Mansbach scrap yard in Ashland, KY.
The GM engines are not capable of pulling loads that steam trans can and for something that's efficient maintenance is required and it made thousands of well paid jobs it's America till we started paying taxes and our constitution was modified.
Fascinating, informative and well narrated, I am not into steam but I really enjoyed this video, much appreciated and thank you...steam lasted in Australia into the early 1970's before diesel traction took over.
The one which was restored recently? That is a monster. Our tech today is so weak. American.cars of the 80s chrome.and steel have been replaced by junk now from Asia.
@@cjones3710 lol, the difference between old cars and the new ones is you might actually survive an accident today that'd decapitate you in the old days. Look at the 2009 malibu vs 1959 bel air head-on crash test and let me know you think
@@rem_92899 I would much prefer to be in 1984 Buick, or 46 Ford. They had reinforved ateel beams on the doors l, and there was steel chrome bumpers in a good deal of automobiles thru the early 90s. The change in design was close to the change in headlight restrictions. I see styrofoam fly apart in bumper of modern autos. That is how they are designed. It might be helpful if others drove safe, and also had small cars, but there are also large autos, MACK trucks, good old 18 wheelers, and bad ol' motorcycle hooligans and cross folk who take frustrations out on othwr folks due to inabilty to manage emotions. I like knowing that a pontaic door is heavy bc its made to protect people w steel beams. No, tricks of godless folk tomake cheaper cars in foreign nations that sputter along....not safe... But nothing is safe about a box on wheels, but its necessary to move about great distances. Thank goodness for gasoline motors, and coal to power the new weaker plug in cars. That limits how far, and long folks can travel.
Hi my name is Aaron Michael Nanneman I live in Brookfield Missouri and I am a big fan of all the union pacific steam locomotives and all other steam locomotives of all the American railroads because I like to get them as big Lionel super train sets know what I mean everyone
😮 dude this is so cool man my favorite union pacific big boy 4004 is the best coolest steam locomotive ever bruh did you know that there were 25 total of union pacific big boys but up big boy 4014 is still operating in this year now this September I am going to see my uncle poncho in salt lake city of Utah so I can see union pacific big boy 4014 over there it's gonna be fun like when I was a kid
Sorry, but pipefitters had nothing to do with anything on this locomotive. It was BOILERMAKERS who built it and did ALL the maintenance on it. Boilermakers have been around as union longer than pipefitters. They started the industrial revolution
yes rebuilt one to operating service but now needs a diesel behind it.. what an embarrassment, this old girl pulled mile long trains before with no help.
I was living in Sidney Nebraska and I seen Big Boy and now KSID radio station is renamed the big boy. I was ok with seeing the big boy steam engine but the residents of Sidney Nebraska are very mean and nasty. If you are thinking about about moving to Sidney Nebraska or visiting Sidney Nebraska, don’t do it. I hate Sidney Nebraska and I moved out of Sidney Nebraska and I will never set foot back in Sidney Nebraska. Do yourself a favor and don’t ever go to Sidney Nebraska.
Why'd you think that the union pacific steam locomotives are the teapots maybe your car is a teapot even your sink if your old pickup truck is a teapot too so shut up you don't know nothing about union pacific steam locomotives because I know them more than you so stop your complaining
😮 dude this is so cool man my favorite union pacific big boy 4004 is the best coolest steam locomotive ever bruh did you know that there were 25 total of union pacific big boys but up big boy 4014 is still operating in this year now this September I am going to see my uncle poncho in salt lake city of Utah so I can see union pacific big boy 4014 over there it's gonna be fun like when I was a kid
😮 dude this is so cool man my favorite union pacific big boy 4004 is the best coolest steam locomotive ever bruh did you know that there were 25 total of union pacific big boys but up big boy 4014 is still operating in this year now this September I am going to see my uncle poncho in salt lake city of Utah so I can see union pacific big boy 4014 over there it's gonna be fun like when I was a kid
😮 dude this is so cool man my favorite union pacific big boy 4004 is the best coolest steam locomotive ever bruh did you know that there were 25 total of union pacific big boys but up big boy 4014 is still operating in this year now this September I am going to see my uncle poncho in salt lake city of Utah so I can see union pacific big boy 4014 over there it's gonna be fun like when I was a kid
😮 dude this is so cool man my favorite union pacific big boy 4004 is the best coolest steam locomotive ever bruh did you know that there were 25 total of union pacific big boys but up big boy 4014 is still operating in this year now this September I am going to see my uncle poncho in salt lake city of Utah so I can see union pacific big boy 4014 over there it's gonna be fun like when I was a kid
Sixty years after this tribute was made, Big Boy 4014 came back to life in the steam shop at Cheyenne, Wyoming.
I was in it many times at pomona.
And now we have a big boy in operation today...
One of my personal favorite documentary films about steam locomotives and this is the first film that I had ever seen relating to the Union Pacific "big boy" type locomotives, it is interesting to observe the operation of railroads over 60+ years ago.
In Aug 1998 my son and I were driving back from Phoenix to his new job in Johnson City Tn. We stopped in Memphis (I wish Id marked the date) for the nite and got to talking with a man in the motel lobby. Dont remember how RRing came up but he had been an engineer for one of these behemoths, and I had only been a lowly B&O machinist. Do you have any idea how humbled and honored I felt when I offered and he shook my hand?
To shake the hand of a man who had been Captain in command of one of the largest "land ships" ever built.??
Such a nostalgic vibe on these classic films. Takes me back to my school days!
This was VERY good, and a beautiful ending too.
I first saw this when I was a child. Now almost 25 years later I still find it amazing. Man I remember when I first saw that cartoon... mister mallet cutting and reassembling his machine. I was blown away. So good of you to preserve this.
Even i had difficulty finding this on UA-cam after i lost The VHS recording of this film. So Glad that BBR has preserved this film even if loco 6597 had a somewhat split number personality.
Not too many rail films as good as this.
Great video! The footage is excellent, the narration clear, and the whole piece shows admiration and affection for these incredible machines.
Truth is; all the railroad companies couldn’t wait to scrap those maintenance hungry teapots and get them gone. Diesel fuel was 6-8 cents a gallon and the diesel locomotives required very little maintenance in comparison. The cost savings were enormous….which meant higher profits. I spent nearly 27 years as an engineer and never once regretted that I missed the steam era. Those engines were filthy, hot in the summer and drafty in the winter….I worked with many steam men back when I started. Not a one of them missed steam engines. Nostalgia is one thing, practicality another. The same logic applies to modern jet aircraft as opposed to the old radial engined propeller planes. A bit of trivia: the steam men told me the C&O T-1’s ….2-10-4’s were powerful brutes but rode horrible. On the other hand, the articulated H8 Alleghenies rode like Cadillacs. And I remember as a kid the C&O 614 Greenbriar sitting derelict behind the Russell, KY roundhouse along with three 2700’s. I got climb up on them back in the 60’s and they were just rusting hulks. 614 got saved but the 2700’s went to the Mansbach scrap yard in Ashland, KY.
But steam locomotive sounds cooler in my opinion
Your mamma's car is a teapot and she's a tramp bitch
Talk about dirty and hot. Cab forwards going to Yuma in the desert block ice under seats.
The GM engines are not capable of pulling loads that steam trans can and for something that's efficient maintenance is required and it made thousands of well paid jobs it's America till we started paying taxes and our constitution was modified.
Thank you for this magnificent film about The Big Boy locomotives 😀
Big Boy spinning it's wheels, was a very magnificent sight. thx for another entertaining video 👍
I can't believe Young men of today would work that hard.
Totally magnificent
8:39 Union Pacific 9000 9:21 Union Pacific Challenger 10:17 Union Pacific Big Boy
An amazing machine !
I can say many times I was up in the cab of the big boy at Pomona. I never thought it would be restored😮
Interesting film from the glorious past
Fascinating, informative and well narrated, I am not into steam but I really enjoyed this video, much appreciated and thank you...steam lasted in Australia into the early 1970's before diesel traction took over.
Really interesting & informative,must have been one impressive sight to see.
This video has just about every locomotive class the Union Pacific ran. The Big Boys, Challengers, The 9000s, The Bull mooses, and The Santa Fes.
I know salvage work is inherently dangerous but I saw more than a couple guys taking some unnecessary risks. Great video
Saw an old big boy engine when visiting Dallas a few years ago, It was a monster an engine.
The one which was restored recently? That is a monster. Our tech today is so weak. American.cars of the 80s chrome.and steel have been replaced by junk now from Asia.
@@cjones3710 lol, the difference between old cars and the new ones is you might actually survive an accident today that'd decapitate you in the old days. Look at the 2009 malibu vs 1959 bel air head-on crash test and let me know you think
@@rem_92899 I would much prefer to be in 1984 Buick, or 46 Ford. They had reinforved ateel beams on the doors l, and there was steel chrome bumpers in a good deal of automobiles thru the early 90s. The change in design was close to the change in headlight restrictions. I see styrofoam fly apart in bumper of modern autos. That is how they are designed. It might be helpful if others drove safe, and also had small cars, but there are also large autos, MACK trucks, good old 18 wheelers, and bad ol' motorcycle hooligans and cross folk who take frustrations out on othwr folks due to inabilty to manage emotions.
I like knowing that a pontaic door is heavy bc its made to protect people w steel beams. No, tricks of godless folk tomake cheaper cars in foreign nations that sputter along....not safe... But nothing is safe about a box on wheels, but its necessary to move about great distances. Thank goodness for gasoline motors, and coal to power the new weaker plug in cars. That limits how far, and long folks can travel.
7:03 this music is from many Yogi Bear episodes in “Huckleberry Hound”
Magnífico video
5:15 Is that Mikado or Mountain?
Mikado. There appears to be no axle set behind the cylinders.
Besides, Mountains were used primarily for passenger trains on the UP.
20:56 And eventually one or two survivors were converted to burn Fuel Oil.
4005 was converted to oil in 1946 and back to coal in 1948 because of combustion problems.
22:06 What is considered more successful freight superpowers? Bigboys or Turbines?
Big Boy is the succesful yet
What a great vidio really enjoyed that... Like all steam locomotives absolutely beautiful, poetry in motion.. But far too Labour intensive.... 👍
5:04 [train whistle] 5:06 [engine chugging]
Who narrated this classic documentary?
Hi my name is Aaron Michael Nanneman I live in Brookfield Missouri and I am a big fan of all the union pacific steam locomotives and all other steam locomotives of all the American railroads because I like to get them as big Lionel super train sets know what I mean everyone
And all these giants were built in the BC (Before Computer) era!
😮 dude this is so cool man my favorite union pacific big boy 4004 is the best coolest steam locomotive ever bruh did you know that there were 25 total of union pacific big boys but up big boy 4014 is still operating in this year now this September I am going to see my uncle poncho in salt lake city of Utah so I can see union pacific big boy 4014 over there it's gonna be fun like when I was a kid
Mallet improved the Fairlie design used on Welsh narrow gauge railways.
The famous challengers of union pacific were built in the year 1936 long time ago
21:31 Atom is too dangerous, proposed but never came to actual use.
But Jet Power did. the GTEL
12:55
4013...RIP.
Voice of the Narrator
8:52 Soviets did also wants one. and tried much bigger rigid frame. too bad it was not what UP is.
Did you know that Allan krieg passed away in 1996 he was in his 70s
Nice ye-olden one.
The 9000 was not largest non articulated locomotive, as it was a 4-12-2. The AA-20 was a 4-14-4 and was built in Russia.
Well the biggest that actually was used in serious operation
Then the PRR S1 Duplex locomotive came to being in 1939. The wheel arrangement was 6-4-4-6.
Nice to see 3985...
Sorry, but pipefitters had nothing to do with anything on this locomotive. It was BOILERMAKERS who built it and did ALL the maintenance on it. Boilermakers have been around as union longer than pipefitters. They started the industrial revolution
yes rebuilt one to operating service but now needs a diesel behind it.. what an embarrassment, this old girl pulled mile long trains before with no help.
I was living in Sidney Nebraska and I seen Big Boy and now KSID radio station is renamed the big boy.
I was ok with seeing the big boy steam engine but the residents of Sidney Nebraska are very mean and nasty. If you are thinking about about moving to Sidney Nebraska or visiting Sidney Nebraska, don’t do it. I hate Sidney Nebraska and I moved out of Sidney Nebraska and I will never set foot back in Sidney Nebraska.
Do yourself a favor and don’t ever go to Sidney Nebraska.
If a steam locomotive has a boy's name its male. Big Boy is a male because of its size and brute strength.
Why'd you think that the union pacific steam locomotives are the teapots maybe your car is a teapot even your sink if your old pickup truck is a teapot too so shut up you don't know nothing about union pacific steam locomotives because I know them more than you so stop your complaining
😮 dude this is so cool man my favorite union pacific big boy 4004 is the best coolest steam locomotive ever bruh did you know that there were 25 total of union pacific big boys but up big boy 4014 is still operating in this year now this September I am going to see my uncle poncho in salt lake city of Utah so I can see union pacific big boy 4014 over there it's gonna be fun like when I was a kid
😮 dude this is so cool man my favorite union pacific big boy 4004 is the best coolest steam locomotive ever bruh did you know that there were 25 total of union pacific big boys but up big boy 4014 is still operating in this year now this September I am going to see my uncle poncho in salt lake city of Utah so I can see union pacific big boy 4014 over there it's gonna be fun like when I was a kid
😮 dude this is so cool man my favorite union pacific big boy 4004 is the best coolest steam locomotive ever bruh did you know that there were 25 total of union pacific big boys but up big boy 4014 is still operating in this year now this September I am going to see my uncle poncho in salt lake city of Utah so I can see union pacific big boy 4014 over there it's gonna be fun like when I was a kid
😮 dude this is so cool man my favorite union pacific big boy 4004 is the best coolest steam locomotive ever bruh did you know that there were 25 total of union pacific big boys but up big boy 4014 is still operating in this year now this September I am going to see my uncle poncho in salt lake city of Utah so I can see union pacific big boy 4014 over there it's gonna be fun like when I was a kid