@@StableAutomation is that I want to put a counter with ultrasonic or approximate sensors in arduino to install it at the outlet of a had to come out rice. so keep the sensor activated by varying its work then culcular like this: 10 working minutes are: answer how many movements the sensor registered but in 10 minutes it fills 10 quitales if the sensor registers 10 quitales as 12000 times that I pass that serial value this way I want to calculate it some idea
Thanks for your support
Thanks a lot!!!!
Good explanation
Sir
Good
Start and program options not shown ....what may be the issue??
Sir, please tell me how to reset the logo same as you show
How to copy program and transfer to another plc
I have a question: Can Siemens LOGO be interfaced with Weintek CMT-SVR-100?
can be communicated over Modbus TCP. (as new logo plc can be configured as Modbus TCP server - ua-cam.com/video/caR-QOjiaX0/v-deo.html)
How to go about Alarms displayed? Have any idea?
do you require to configure alarm or check internal diagnostics message?
Sir I have same logo as u have
Problem Is that start stop option is not coming what to do
Check if you have logged in with password.
how to increase running hours of generator in plc
You need to create a logic using timer.
is it works with sensors
What type of sensor you want to use ?
@@StableAutomation ultrasonic .
@@SmartComputerTMOsminAltamirano either you can directly connect with PLC ( 0-10V) or you can use expansion module AM2 (for 4-20 ma)
@@StableAutomation is that I want to put a counter with ultrasonic or approximate sensors in arduino to install it at the outlet of a had to come out rice. so keep the sensor activated by varying its work then culcular like this: 10 working minutes are: answer how many movements the sensor registered but in 10 minutes it fills 10 quitales if the sensor registers 10 quitales as 12000 times that I pass that serial value this way I want to calculate it some idea