Your maintenance video’s have been extremely valuable. Many thanks for the shared knowledge and helping to keep my machine in top shape for maximum airtime 🤘🤙
Perhaps next time, try freezing the bearing. Though, if you froze the crank, you could put both hot bearings on it--and then freeze the whole crank and bearings, and drop it in the hot housing halves, it might work easier. A thin film of 2-cycle oil will help protect the bearings and crank from rust from the frost.
Your maintenance video’s have been extremely valuable. Many thanks for the shared knowledge and helping to keep my machine in top shape for maximum airtime 🤘🤙
You are a genius. I could never do that myself. Dreaming of electric motors replacing two stroke nightmares someday.
I really like that you showed what to do when not everything goes as planned. This is usually the hardest part :D
Absolutely Perfect 110% Stephon! Very Well Done!
Your maintenance videos have guided me more than once. Thank you!!
I didn't see how the woodruff key was re-installed! Thanks for the information.
You should get a bearing cone heater. It's a lot easier than using a heat gun. Great video!
Do you sell rod main bearings, shims and pin for those of us who repair crank shafts?
Perhaps next time, try freezing the bearing. Though, if you froze the crank, you could put both hot bearings on it--and then freeze the whole crank and bearings, and drop it in the hot housing halves, it might work easier. A thin film of 2-cycle oil will help protect the bearings and crank from rust from the frost.
Great Video, please keep on making those!!!!
Thanks Stephane 👍
ok now, do you guys have a teardown manual with torque specs for all bolts? Mine is ready for a complete recheck.
Do u have a link to the pulley tool for the barrens and do u have a like to the gasket sealant
Hey friend, where can I get this tool to remove the bearings, do you have a link?
Why not use heat to remove the bearings as you may damage the aluminium case if the bearing picks up on the case on the way out?
Good job, you guys need to put the Scout logo on the gloves.👍🤔
Как заменить шатунный коренной подшипник, прокладку и пальц коленчатого вала?
I need your assistance
info@scoutaviation.com
Do you have WhatsApp dear ?