The only issues with these displays is power consumption, in the lab I used these and measured a 200mah draw. If you project is battery powered say with a 18650 battery, that means only an approx 9 hour life. In these situations an e-paper display might be better, drawing only micro amps when in use the same back of the envelope math shows a battery life of more than 500 days
Upload the code to the Arduino. Power off the Arduino board, take off the shield and then reconnect it to the Arduino board. Power it back on. For some reason, that seemed to work for me when my board gave me the same issues.
hey , I wanna ask a qustion about arduino. Lately I was trying to display picture on the TFT touch screen ,and what I want to achieve is when time goes by the picture will blur and you have to touch the screen the way just like you wipe the dust off you picture frame in order to make the picture as sharp as before.... How am I gonna code this ,and which direction should I go for.... A million thxs ahead !
The only issues with these displays is power consumption, in the lab I used these and measured a 200mah draw. If you project is battery powered say with a 18650 battery, that means only an approx 9 hour life. In these situations an e-paper display might be better, drawing only micro amps when in use the same back of the envelope math shows a battery life of more than 500 days
The problem is the shield will eliminate all other IO pins, that for instance we cant use the touch tft to control motor remotely using nrf24l01
I did the same but my screen can not be touched. Does it go wrong?
me too. :(
Upload the code to the Arduino. Power off the Arduino board, take off the shield and then reconnect it to the Arduino board. Power it back on. For some reason, that seemed to work for me when my board gave me the same issues.
I have a question. How can I know my display model? I couldn't find it on the back of the tft lcd
I know I may sound dumb but do we need to have an arduino UNO board for every project or can we some times not use arduino UNO
-reply fast plz
Thank you for sharing! Just a question, it seems that my touch screen does not respond to pressure. What could be? Thanks
hey , I wanna ask a qustion about arduino. Lately I was trying to display picture on the TFT touch screen ,and what I want to achieve is when time goes by the picture will blur and you have to touch the screen the way just like you wipe the dust off you picture frame in order to make the picture as sharp as before.... How am I gonna code this ,and which direction should I go for.... A million thxs ahead !
Can i still use other pins?
Nice..
But arduino uno,,gsm 900a module nd relay se.....light fan control krne
Ka code khi se dhund k de dijiye plzz...
how about connecting it to raspberry pi 4??
Thank you for sharing, i got my setup working straight away.
Very nice, thanks for sharing
It's awesome and I'm new subscriber.could you tell me which programing to study for kids robot
Good tutorial but the music was a bit distracting
Tienes el codigo?
ther's no code ?
good, merry cristmas
thank you for sharing
muchas gracias ! Eres el mejor ! :*
is there a code?
Very nice
fantastic keep going
Awesome video !
Thank you!!!
Thank you bro
O nice project