So many on line tutorials now,I like your approach ! I'm a Hobby turquiose miner with more than a lifetime of stone to work with silver! Kinda moving from beginning to more intermediate projects.soldering seems to be my ongoing challenge! Thanks for your guidance!
Simple, concise and to the point...our instructor made this process seem like a BIIIIG mystery and wouldn't teach it to us.... Thanks for another awesome video!
There are some smart tricks to solder an item to a flat surface without leaving any trace of soldering . One don't need to file or to scrub the joint angle of pieces in contact after soldering them . One can even put the piece over the flat surface without add the solder first , can be soldered after , very safe , the solder will go under the piece without leaving any trace . This way the surface will stay clean and uncontaminated by solder .
Nice little project. Tnx! I enjoy learning from your vids very much. Would you do a presentation on gasses for use with the mini torch? Acetylene, propane, and city gas?
Soham, why would I NOT solder from underneath the screen? Wouldn't that be even better? Please advise, this has been a long wondered question. Thank you for answering this, I am watching every one of your videos in sequence, an excellent course. Thank you soooo much.
you can, but it takes way too much heat and sometimes warps the backplate. better to sit the screen on a charcoal block and circle on top so the flame bounces underneath
I see this has been sort of answered earlier, but is there a reason to do one over the other (next to piece above screen or under screen)? thank you mucho.
This way , one can solve the most important task in enamelling , instead of carving the metal ( champleve) , can easily solder the piece - even fretted before - to a flat , even or not surface , using a hard solder , and enamelling it . it will work fine . Trust me . "Jewel is a very simple job, has only some basics, physics and chemistry. And thousands of helpful tricks." Said once an old german goldsmith ...
You are a Terriffic instructor Soham and thank you for sharing your knowledge and expertise! Question: what type of screen did you use...is it steel, aluminum, specifically for jewelry soldering or just a scrap from a hardware store? (It appears pretty substantial.)
Soham, I really enjoy your videos. However, I am having a HORRIBLE time trying to sweat solder an 18-ga sterling piece onto an 18-ga. sterling cuff bracelet. I am cleaning it all, sweat soldering the top piece, and no matter how long I torch it, it will NOT adhere. I have no problem sweat soldering small pieces, but cannot do it on cuff bracelets. Any suggestions?
soham harrison I have the Smith Little Torch and used the "rosebud" torch using 16psi for both the oxygen and propane tanks and I thought I had really turned up the heat. Is that still not enough? Thank you for your response!
It's tricky still trying to work it out I use 16 gauge sterling silver 1 inch bracelet with 16 gauge piece to solder on fairly big one time I had to heat the whole bracelet then run a torch on top as well as bottom not enough heat it takes some patience and nerve I'm going to try the way in the video I've done it many times this way you got to make sure your piece sits down completely flat so I've pushed it down with the soldering pick before good to have a soldering stand
I 'll let go of - from privacy -one of my videos to show how soldering it can be used to get the look of welding cast object. The object in discussion is the woman , who is hollow , not cast . I made it using 18k gold and the solder is made by my own needs ,related to the difficulty of the work. Also, I do my own soldert when it comes enameling, especially plique a jour, and is usually purer than the material that is in the works. That;s why one can't see any soldering joint on my works .
So many on line tutorials now,I like your approach ! I'm a Hobby turquiose miner with more than a lifetime of stone to work with silver! Kinda moving from beginning to more intermediate projects.soldering seems to be my ongoing challenge! Thanks for your guidance!
Thank you, after two years of not soldering anything, I needed some refresher training.
Simple, concise and to the point...our instructor made this process seem like a BIIIIG mystery and wouldn't teach it to us....
Thanks for another awesome video!
Brilliant- putting the screen over the charcoal blocks! Thanks!
Thank you so very much for all the time you've spent making these videos!!!
Another really helpful instructional video! Thank you so much for all you share.💜
There are some smart tricks to solder an item to a flat surface without leaving any trace of soldering . One don't need to file or to scrub the joint angle of pieces in contact after soldering them . One can even put the piece over the flat surface without add the solder first , can be soldered after , very safe , the solder will go under the piece without leaving any trace . This way the surface will stay clean and uncontaminated by solder .
Thank you! I desperately needed this lesson today!
Nice little project. Tnx!
I enjoy learning from your vids very much.
Would you do a presentation on gasses for use with the mini torch?
Acetylene, propane, and city gas?
Fascinating, I always love your videos, you are such a great teacher. I saw the silver flash as it flowed :)
Thank you again, Mr. Harrison!
I just practised this again. You are a great teacher though.
Soham, why would I NOT solder from underneath the screen? Wouldn't that be even better? Please advise, this has been a long wondered question. Thank you for answering this, I am watching every one of your videos in sequence, an excellent course. Thank you soooo much.
you can, but it takes way too much heat and sometimes warps the backplate. better to sit the screen on a charcoal block and circle on top so the flame bounces underneath
I see this has been sort of answered earlier, but is there a reason to do one over the other (next to piece above screen or under screen)? thank you mucho.
This way , one can solve the most important task in enamelling , instead of carving the metal ( champleve) , can easily solder the piece - even fretted before - to a flat , even or not surface , using a hard solder , and enamelling it . it will work fine . Trust me .
"Jewel is a very simple job, has only some basics, physics and chemistry. And thousands of helpful tricks." Said once an old german goldsmith ...
You are a Terriffic instructor Soham and thank you for sharing your knowledge and expertise! Question: what type of screen did you use...is it steel, aluminum, specifically for jewelry soldering or just a scrap from a hardware store? (It appears pretty substantial.)
Super good. Thank you.........always nice and clear.
Great tips, thanks
Fabulous video! Thank you!
I Think I Love You ! Thank you for sharing.
Thanks for this informative video!
Thank you--great teacher!
This can be done with any kind of solder , soft medium or hard , no matter the metal or carat , silver or gold .
Hi Soham, I have another question, how would I sweat solder open work? If I cut a design, scrollwork, and place it on a base? Same Way?
Soham, I really enjoy your videos. However, I am having a HORRIBLE time trying to sweat solder an 18-ga sterling piece onto an 18-ga. sterling cuff bracelet. I am cleaning it all, sweat soldering the top piece, and no matter how long I torch it, it will NOT adhere. I have no problem sweat soldering small pieces, but cannot do it on cuff bracelets. Any suggestions?
sounds like the torch is too small, crank up the heat
soham harrison I have the Smith Little Torch and used the "rosebud" torch using 16psi for both the oxygen and propane tanks and I thought I had really turned up the heat. Is that still not enough? Thank you for your response!
It's tricky still trying to work it out I use 16 gauge sterling silver 1 inch bracelet with 16 gauge piece to solder on fairly big one time I had to heat the whole bracelet then run a torch on top as well as bottom not enough heat it takes some patience and nerve I'm going to try the way in the video I've done it many times this way you got to make sure your piece sits down completely flat so I've pushed it down with the soldering pick before good to have a soldering stand
I 'll let go of - from privacy -one of my videos to show how soldering it can be used to get the look of welding cast object. The object in discussion is the woman , who is hollow , not cast .
I made it using 18k gold and the solder is made by my own needs ,related to the difficulty of the work. Also, I do my own soldert when it comes enameling, especially plique a jour, and is usually purer than the material that is in the works. That;s why one can't see any soldering joint on my works .
The attached piece will looks like it is cast , not soldered .
very helpful video. thanks for posting
What do you use to cut your solder????
What brand of flux do you use? I've only used grifflux, and would like to start using the liquid kind but am unsure the difference.
I use handy flux. You can thin it down with water.
thanks so clear and concise
Wnat does neutral flame mean?
What flux are you using? Right now I only have Handy Flux on my bench, and the flux you're using looks nothing like it.
Cheers!
tenacity 4A, but handy flux should work as well
Thanks!
That's a heavy duty screen you have...where did you purchase it? Thanks!
riogrande.com
How is that spelled? Meniscus? nice thank you
Look for "JADE was sold" on youtube .
😄😄
chewing & talking ......!!!!!!
WTF ......??????
thank you
yes, just borax and water
it is stainless scrap from an engineering shop