Thumbs up Sir, resetting the fuse is all I needed to do. To easy to save over $700, my lady wanted to buy her a new one.
We were ready to scrap out dishwasher and then I took your directions and slammed the fuse off of our concrete step and we are now running some dishes in the dishwasher. Thanks a million
If I could give this guy 100 thumbs up I would. We need more UA-cam content like this. Not people trying to become instafamous. Great content, keep it up. You are a lifesaver!!!
Very nicely done. My model is different and the fuse is different but your clear description and explanation is great. I was able to repair mine because of your video. Thank you.
I laughed when you said to hit it with a hammer. I said, yeah, right. DANG! It worked! Thank you. Subscribed now.
Thanks Rob, all you need is a big hammer and a roll of Duct tape😂😂😂
I did replace the fuse after the old kicked off again, but the new fuse lasted about a week before it kicked. Problem not solved yet, but I can pull that top panel and slap that fuse and put it back together faster each time, now. Down to about five minutes.
Thanks Boss...I just changed the fuse on my dishwasher and it worked like a charm
I thought I was going to be without a dishwasher until I could order the fuse, and then I happened to see your vid. I must admit, I had no confidence that slamming the fuse on the floor was going to do anything but give me a little discharge, but dang, it worked like a charm! Thanks so much!
I just did exactly what you said and banged the fuse on my garage floor. Works like a charm. Thank you so much you save me a ton of money.
You saved my butt and my wallet! Thank you for this.
This is the first time I've worked on a major appliance, but I figured it's broken so why not try? I've never even used a multimeter and had to go buy one and then watch another video to learn how to use it for continuity testing. I already had some Torx screwdrivers and your instructions and camera work were perfect! My dishwasher is not a Whirlpool, but it's nearly the same and so I didn't have to remove the black cover over the fuse section. I did have to bang the fuse on my garage floor and, wow, like magic, continuity! I'm running a load of dishes right now and my spouse is very impressed - as are my girlfriends who are scared to try things like this. A big THANKS to guys like you who help us women (and men) learn new skills here on UA-cam! Thanks also for saving my household money and possibly months of waiting for a new dishwasher with how everything is being delayed due to the cargo ships.
Thanks. One minute holding the start button got er done. Praise the Lord and Scott the Fix it guy.
Instead of hitting the fuse with a hammer, I hit the dishwasher with a sledgehammer, repeatedly. I feel much better.
I'm about to be there! I have 3 teenagers and we live on a farm. 'Nuff said.
Perfect. Thank you so much!
Great hint great content, not only $$ saving, but more importantly, time saving
Thanks. That was the most helpful video.
Loved the fuse reset tip, thanks so much.
Thanks so much Tony 😊 I hope you’ll click here to support us by joining our Channel: ua-cam.com/channels/GpInAejvpfVVE4FHB_L-Dg.htmljoin
You’ll get Live Appliance help when ever you need it.
Thanks a lot Sir, you just saved me from buying a new dishwasher. I changed the fuse of my KitchenAid dishwasher and it came back to life.
Great video.... Changed the fuse and it worked perfectly the first time, then it blew again the next time we used it... guess I have other issues that are causing it to blow .. ugh. Thanks for the video. Your instructions were very easy to follow and explained very well.
Hopefully you got this fixed. If not, check that all wires have good inulation on them, and that no bare metal connections are happening
You're the KING! Worked on my Whirlpool Quiet Partner II, bang that sucker! Thank you!
Thanks men so helpful video it save me to buy a new dishwasher thank you so much
I've given up finding a thermal fuse in my model Kenmore Elite 665.12783k311. It doesn't exist. I've taken it completely apart. Good luck getting it back together!
I just bought a brand new whirlpool dish washer. Hooked it up, used a new power cord. When I plug it in the control panel flickers for 3 seconds then all power is off again. When lights do come on, it's like half light up almost like a brown out
I have no idea what to do other then return it to lowes for a replacement.
Any ideas? WDF520PADM is the model
Can you get the part at Lowes or Home Depot
I seem to have this exact problem with my 3yr old GE dishwasher. My door has no screws, however, although it appears the cover to the panel might pop off from the outside/front. I'm afraid to try to force it without confirmation--does anyone know for sure?
This is so helpful!!! Thank you very much. One question... Is there much of a shock risk while working on it?
Great video thank you...I have been looking for a fuse to purchase but only finding "capacitor"..are they basically they same thing? thanks
Can you send that same question to me at my email at scottthefixitguy@yahoo.com along with your model number?
Could the door switch cause the machine to show no power ?
So if components get to hot and trip the fuse and I replace the fuse don’t I still have an issue (hot components)?
After having no power to the dishwasher, I replaced the thermal fuse and wiring. Once complete, the power came back and when I started the dishwasher cycle water started to flow as it normally does. After 10 seconds it stopped. The lights are still on, but it seems like its stuck. I canceled and started a new cycle. Same thing, it starts like normal, water starts flowing in, and then after 10 seconds it stops. I can hear the control panel inside clicking. Any thoughts?
Hi, when changing the fuse do you leave the dishwasher power on ...if so is this safe
we have same dishwasher wondering what is the model number
Always cool to learn something... Lights came on, which another might say is concerning. Best to turn off power for most of us.
Please pardon if I missed that being said.
Does the thermal fuse you mentioned in the link work for any brand? I have a 19 year old Bosch dish washer. Can't find the model number.
@@QuickAndEasy5MinuteAppliance It doesn't power on. Circuit breaker turned off when this happened. I turned it back on, but no power to the DW. (No lights) Bosch model SHE43RL5UC/64
Please explain how and WHY banging the fuse resets it!? I’m an appliance technician and have never done this so I’m very interested. After you bang it, how long does this type of “fix” last? WHY does it even work on the first place? Please advise! Thank you for the tip!
From what I gather it resets the fuse that pops when heated up- its like an umbrella that gets blown upside down. Atleast that's how the thermal cutoff fuse on my dryer works.
Thank you so much!!!! 🙏 I'm going to have a crack at that. Nothing to lose,' cept a few hundred $$$. Can you please explain the door latch problem?
Great Question Caroline👍 Click Here to Get Live Expert Help From Me For Just $5.00:
ua-cam.com/channels/GpInAejvpfVVE4FHB_L-Dg.htmljoin
I bought a whirlpool from Lowe’s 8 weeks ago. One day it had no power. I called whirlpool because it’s still under warranty. A guy came out and said it was an electrical issue in the house.
Can you send that question to my email at: scottthefixitguy@yahoo.com
I just replaced the whole control panel, but used the old fuse again, and dishwasher still doesn't work, so NOW I will try to reset the fuse!
I’m not finding a fuse on my Frigidaire dishwasher. So my only option is to replace the control panel? Suggestions on where the fuse could be?
Hi Robert,
I think there’s one connected to the control board in the door.
@@QuickAndEasy5MinuteAppliance I'm having the same issue with my fridigaire. Doesn't seem to have one in the door portion. The model I'm working with is FFBD2406NS11B. I have checked in the panel behind the buttons, as well as all throughout the door. I have read about a thermal fuse being down below, but haven't got around to checking.
Hi any idea where the fuse is on a belko dishwasher I’m struggling to find one
Thank You So Much for A Great Question.👍
Can you send that same question to my email at: scottthefixitguy@yahoo.com
I’d like to offer You Our Channel Membership That Gives You ✨LIVE HELP ✨With Zoom or Texting or FaceTime. Click Here To Join: ua-cam.com/channels/GpInAejvpfVVE4FHB_L-Dg.htmljoin
Thanks Again,
Scott
I had the uncommon problem the latch has two arcade button switches and one was sticking in so I worked it loose and is fixed until I get a new one, im sure it will stick again eventually.
My question is your mention the lock what if the lock is stuck how do you open it
Can you send me an email at scottthefixitguy@yahoo.com so I can give you more detail on the fix?
Nice trick about resetting the fuse. Are you sure it's actually still a fuse and not just a completed circuit? If it's permanently connected then that could be a fire hazard.
Can the fuse intermittently stop working? My power intermittently goes out on my ge. Usually unplugging it for an hour it'll fix it temporarily. I replaced the control board. Still the same. A month later and the unplug trick isn't working anymore.
Try removing all the wires from the circuit board located below the door and then plug them back in👍
I have had GE door sw cause problem. When dishwasher installed. top clamps drawn upward to much and in time bow the upper cavity ever so slightly making the door switch not function. Easy fix. Apply some shims where it is bowing up and shim it just enough so it is straight again. Problem solved.
After resetting the fuse and turning it on. The washer is coming up with 2 minutes on the board. After the two minutes are up, I'm stuck right at the beginning, no power.
Can you try it again and when it shows two minutes can you press cancel to see if that will reset it.
What's the fix for door switch? Need to change parts?
Can you send your model number to my email at: scottthefixitguy@yahoo.com
I know this is an older video. Ive got a black whirlpool dishwasher. From around late 2017 is when we bought our house and replaced the dishwasher. We only used it about 1 time per week. It died about 6 months ago. Its one that has the buttons hidden under the counter once its closed. There is zero light or power going to this thing. Will this video fall in my lane? Thanks in advance.
Can you plug a lamp into the same receptacle that the dishwasher plugs into to see if the outlet has power?
The light on start won't stay lit to start. Please help.
Hi Carol,
Can you send a video of that to: scottthefixitguy@yahoo.com
If I put the old fuse in my driveway and run it over with my car, will that reset it?
You’d need to hold it with pliers and bang against hard surface.
i was told if you put the fuse in the middle of a sausage and hit the wife over the head with it ...that works...but not on a Thursday
Scott, thanks for the tip. I did smack the old fuse on my patio floor, then put it back in and it worked! Who woulda thought to try that?
All I did was open it to put a knife in it…I used tofu all my stuff. But now I haveALS and can’t go taking it apart.the breaker box is ok.any ideas?..
Mine is odd. It no longer lights up after washing to show it’s done, all lights off. So I have to go flip the control panel in the garage to get it working again. Last night it took me 15 times of flipping the fuse box to get the lights to come back on. I actually hear it trying to do something after I flip the fuse box each time… HELP!
My dishwasher has this problem but i dont know where the plug is where can i find it
@@QuickAndEasy5MinuteAppliance where my dishwasher is plugged into. Cant see an outlet, could it be plugged into the wall behind it?
Hold cancel button down for thirty seconds, that’s the ReSET Button!
Sucks that I'm here but I'm here
@@macheteslice hi! Thanks for asking and yes I did:) fuse needed to be reset, tried running it over
I threw my fuse around on the concrete a few times. I didn't think of running it over, maybe next week when it the dishwasher takes another nose dive. Have a good one.
The fact there are like 900 videos showing the same exact brand and problem says everything about this junk. You know what would be better than a thermal fuse you have to replace? A damn sensor that stops the appliance from ever getting too hot. What a concept.
Mines died 😢
Can you try disconnecting all the wires from the circuit board below the door and then put them back on to see if it’s better.
DW80N3030
www.fixya.com/support/t27115673-normal_light_flashing_samsung
Probably a leak underneath
You are awesome sir! Reset worked and ordering another one now! Thank you very much!
Great job Jason😊👍