Hey Alex, nice video. I love the interface looks very clean compared to the chaotic cyberpanel. But you didn't mention anything about security features. Is cloudpanel secure? Maybe there's a chance for a new video comparing hestia, cyberpanel and cloudpanel? I'm setting up a cloud server on hetzner, which one of those 3 do you propose? Thanks!!
Min requirements for Cloudpanel is RAM 2GB. I'm running 4 Wordpress installations on Digital Ocean droplet 1GB RAM without any issue until now. What am I missing? Cheers.
Thanks. Really nice video. I created as you instructed and it is totally working fine. Just for curiosity, In oracle, it does not show me the instance as "Always free". Will it cost me at the end of month. My Free Trial ended few months back. Thanks again.
Hi from Greece. I was try to install a nodejs app in ampere oracle vps without success. May be there is a problem with the arm processor. I can't find a video instruction and the official cloupanel instructions is no good.
Alex, I use Termius for managing SSH. It worked great - but as soon as I rebooted the machine (After initial CloudPanel install), I can no longer SSH into my virtual machine. Any ideas here? Nothing changed besides typing in "reboot" and I've not been able to reconnect since. Same SSH key, same user, same information (All saved as a host in Termius).
Hi Alex, great video. I was wondering to migrate my website that is starting to get bigger (about 200 posts) from cloudways Vultr HF plan, but after taking a look at the performance metric, mine are 3x faster. So probably its better to pay and stay cloudways, then the free plan? I know its cheap and provides a lot of value, but comparing with cloudways that is a premium host, i think probably is a bad move. Let me know what do you think about it.
Great tutorial as usual, thank you. I followed couple of others one to get free Oracle server, and to add hestia, my question is should I remove hestia and setup cloud panel instead ? or keep both ?
hello, excuse my english, i am from latam, how can i add another website to the same cloud? i tried with aaPanel adding the same ip address of the host (vps) to the configuration of the second domain, and in aaPanel it was a disaster and even the ssl certificates of the first site were disabled, basically i had to reinstall everything from 0, so i wanted to switch to another friendly panel and i found your video, and i want to know how to add another domain for another website on the same host correctly.
Hi there, I have used this method for 2 sites and all works well. The only problem is that after some time - a month or so - my instances disappear and the sites do not work anymore. So I need to recreate the instances again. Once I create the new instances however, the old ingress rules are still there. Why would the instances disappear?
For the arm instance i tried plenty of options but i settled with Virtualmin it's the best so far for me, it looks complicated at first but gets easy once you get used to it
@@silverfoenix The supported PHP version is 7.4 but you can install other versions by adding ondrej Repository, I am using PHP 8.1 and it's working fine On the default installation it will install apache you have to choose LEMP instead of LAMP during installation to get NGNIX There is a tutorial for installing varnish and configuring it to connect with apache but I have no idea if it works with arm64 I haven't tried it
can you make a cheap way to make a mail server (low spec vps no antivirus no antispam) with connection with email client like thunderbird (smtps pops imaps) ? (i have try cyberpanel some times didn't like it for mail server)
Hey Alex, you have an amazing ability to break things down into simple logic. Keep up the great work! I have one quick question though that never seems to get addressed. We always have the setup addressed but what about the spindown / shutdown / change to a different server? Example, when I signed up for oracle free tier I could not seem to get an Ampere instance to become available so I went ahead and just did an AMD to play with and familiarize, set everything up using cloud flare and sendinblue etc.. Today I was able to get an Ampere instance and would like to move that domain over. What is the best practice for shutting down a domain on one server if you wish to recreate it n another, when you have SSL set up on cloud flare, and a mail server set up using sendinblue, etc. I don't care about transferring any mail or web files etc. Is it just as easy as deleting the domain in Hestia? Delete the DNS records in cloudflare? And then just rebuild everything?
@@IdeaSpot well that’s what I did but it felt kine like pulling the plug on a windows box. 😁 Simple solution is sometimes best solution lol! I finally got ampere instance and followed your oracle/hesitate/cloud flare/sendinblue but could never get the email to work. Would receive but choked on sending. Did it three times got the same result so went back to plan A using my el-cheapo shared hosting with unlimited domains and mailboxes. That works. Not sure where I went wrong on sendinblue.
Really amazing video. I loved cloudpanel better than aapanel. Only issue am facing is the FTP connection. I created ftp user in the cloudpanel admin for the site, but through filezilla am not able to connect somehow. Through the default file manager in cloudpanel I was not able to upload my website backup which was 500mb+ in size. Any advice on this ? Thank you so much in advance
Hi Alex, Great Tutorial on cloud Panel, do like to know ,how to add ioncube Loader to this setup , my some sites need ioncube to work.( ioncube works upto 7.4 php only) if you can guide
I followed all the steps and it is working great except for one thing. FTP doesn't actually work even though it is allowed in Oracle (port 20 and 21). Because of this, Wordpress updates also are not working because Wordpress asks for FTP credentials. How to fix this problem?
it is great video, but as beginner, if he has no custom domain name so how to start, I mean for testing purpose use ip address, how to do that, because when i am going to make wordpress website then ask domain and site name.
Yes, go to your Instance in Oracle Cloud Control Panel. Stop the instance. Click More Actions Click Edit And Edit Shape. You can add more OCPU and RAM here. Once complete, Start your instance again.
Hi thanks for the great tut, just wanted to ask I want to host multiple WP site with cloudpanel should I chose 1 vm and install cloudpanel or should i add 4 vms separately and install cloud panel on all 4 vms. which do you think is better option for good performance.
Hi. Need a video tutorial for oracle cloud. How to replace the public key shh if the private key shh is lost. Or any other way to restore access to the console. Plz plz.
Sir last 1 month I tried many time to make a free tier account and I used many type of credit and debit card but all time payment debited my account and after some time credited also but did not make account. Please help how it is possible.
Thank you for the video, very interesting. Newbie here... I have installed Centos Web Panel on a VPS and on tope off the A record, I had to configure the Nameservers DNS (NS1 and NS2) also configured on Namecheap. On your tutorial you didn't show these NS1-2 configuration? Will I have to configure it or isn't it necessary with cloud panel? I am a bit confused. Edit: I just read the comments, and this is funny, someone else was asking you the same question ..:) But actually it does not help me, you answered that the DNS are managed by namecheap and therefore there is no need of configuring the NameServers DNS... If you could briefly explain why it is not necessary. I guess i will have to find a tutorial explaining what are the nameservers dns..
Hi, It isn't necessary, I have the nameserver set to namecheap basic DNS: snipboard.io/3XKZvM.jpg and then enter the records as shown in the video. Have fun :)
Great video! thanks Just what i was looking for, however when i try to login to pma i put my user&password i created and it just keeps asking and will not let me in.... any ideas?
@@EdwardCox2016 I asked because there was a person who commented in a previous video(similar to this) on this channel saying he noticed his website went down periodically, so he had to restart the server from time to time in order to keep his website online.
I've one request: Could you please do a performance comparison video between a LiteSpeed server and a CloudWays server? CloudWays uses an optimised Nginx, its much faster than default Ngnix, but maybe competitive with LiteSpeed. It would be a great video too because no one else has done it so far I think!
i did a quick comparison in the openlitespeed video: ua-cam.com/video/Nc4gU_X6j_w/v-deo.html (skip to the performance chapter) - I don't think there is any notable difference in the majority of cases, but I think some people like openlitespeed for the included wordpress plugin
@Saptrishi das biswas thanks, so no pros to using maria unless on old hardware or a low budget? Is it more efficient in performance or just has lower hardware prerequisites
MariaDB often performs better than mysql in wordpress, also Maria is fully open source GPL licence, but mysql has an 'enterprise edition' that gives some extra features. I probably should've used Maria on the tutorial, but mysql was just the first option on the list 😅
@@_Trakman no thats not mariadb is more optimized database and if you have multiple connection on database MySQL is getting slower that means your site getting also slow but mariadb can Handel multiple connection with out loosing performance
For anyone banging their head like me you need to run the command "sudo apt reinstall systemd-timesyncd" before installing cloudpanel, otherwise it says installation complete without actually being installed.
Recommendation from CloudPanel documentation is --- Operating Systems Ubuntu 22.04 (Jammy Jellyfish) Debian 11 (Bullseye) --- Architectures# X86 ARM64 --- Cores# >= 1 Core --- Memory# >= 2 GB of RAM --- Disk# >= 10 GB --------- It's very lightweight so I believe it will run on 1GB - but recommended is minimum 2GB.
Thanks for the updated cloud-panel with oracle tutorial Alex. Good work as usual!
My pleasure!
Thanks for the tutorial, Alex! Would you be able to do a CloudPanel installation for DigitalOcean and/or Vultr too?
Yes I can - I'll add it to my never ending list 😅
wow, I am always glad whenever you drop a new video. it's always resourceful. big ups to you 👏
Hey Alex, nice video. I love the interface looks very clean compared to the chaotic cyberpanel. But you didn't mention anything about security features. Is cloudpanel secure? Maybe there's a chance for a new video comparing hestia, cyberpanel and cloudpanel?
I'm setting up a cloud server on hetzner, which one of those 3 do you propose?
Thanks!!
Yes, it is. You can add 2FA to it
vote for create video about hestiapanel vs cloudpanel
nice idea, I've only been using Cloudpanel for a few days but its nice 👍
Yes
Hestia best
@IdeaSpot Hi, which do you used must these days? Hestia or CloudPanel? what is your choice?
What about cyber panel..?
Great content Alex, i was just wondering if you cloud create 2 instences with 2cores 12 gb ram each instead of one with 4cores / 24gb ram.
Yes
I just figured out that Cloudpanel updated to support arm, so thought to give you tip, but here I see this video, too fast man. Good content
Is it possible to switch from hestia to cloupanel without losing the associated sites?
Cloud panel is not login in browser please give me any suggestions or solutions
I followed all the steps mentioned and it didn't work
help me
Awesome content as always, keep it up!
Appreciate it!
Used it before your tutorial, it’s a great panel for oracle free tier😆
Nice work!
Hi Alex, I am facing this error when I switch proxied on cloud flare A records ERR_SSL_VERSION_OR_CIPHER_MISMATCH
Hi how are you doing? is it ok to create new vm while terminated vm is still showing in dashboard of oracle cloud. There would be no charge right?
Min requirements for Cloudpanel is RAM 2GB. I'm running 4 Wordpress installations on Digital Ocean droplet 1GB RAM without any issue until now. What am I missing? Cheers.
And also you say that it does not do emails, could you set up a SMTP like Fluent SMTP and connect it to Amazon SES would that work on CloudPanel?
Hey Alex,
Is CloudPanel have WHMCS module?
I love your videos. Straight forward. Please can you do a video on hosting django on cloud panel if possible with Django channels
Thanks. Really nice video. I created as you instructed and it is totally working fine. Just for curiosity, In oracle, it does not show me the instance as "Always free". Will it cost me at the end of month. My Free Trial ended few months back. Thanks again.
Hi from Greece. I was try to install a nodejs app in ampere oracle vps without success. May be there is a problem with the arm processor. I can't find a video instruction and the official cloupanel instructions is no good.
In VM( virtual machine)Any daily or monthly limit for upload or download ?
Alex, I use Termius for managing SSH. It worked great - but as soon as I rebooted the machine (After initial CloudPanel install), I can no longer SSH into my virtual machine. Any ideas here? Nothing changed besides typing in "reboot" and I've not been able to reconnect since. Same SSH key, same user, same information (All saved as a host in Termius).
Hey there, going through the same problem here. I know it has been a long time since but have you found a solution? Thanks.
Many Thanks，Alex. Could you please tell me whether the SSL certificate is automatically renewed or we have to do it manually?
Hi Alex, great video. I was wondering to migrate my website that is starting to get bigger (about 200 posts) from cloudways Vultr HF plan, but after taking a look at the performance metric, mine are 3x faster.
So probably its better to pay and stay cloudways, then the free plan?
I know its cheap and provides a lot of value, but comparing with cloudways that is a premium host, i think probably is a bad move.
Let me know what do you think about it.
What's your advice for me? I'm building a new WordPress site. Should I go with the Free Oracle hosting and then transfer to Cloudways later on?
Great tutorial as usual, thank you. I followed couple of others one to get free Oracle server, and to add hestia, my question is should I remove hestia and setup cloud panel instead ? or keep both ?
Also curious. Is it possible to run both?
I created 1 oracle instance with all tha powah, should've gone half-n-half I guess.
@@jonaspudas9988 NO you cannot have two panels.
My Sql or MARIA DB which one is the best, or should we select?????
I loss ssh key in Oracle how to recover
CloudPanel vs CyberPanel? What do you think?
hello, excuse my english, i am from latam, how can i add another website to the same cloud? i tried with aaPanel adding the same ip address of the host (vps) to the configuration of the second domain, and in aaPanel it was a disaster and even the ssl certificates of the first site were disabled, basically i had to reinstall everything from 0, so i wanted to switch to another friendly panel and i found your video, and i want to know how to add another domain for another website on the same host correctly.
Thanks a lot Alex for the great video! 🙂
i tired to set this up but it just will not allow me to ssh into the server no matter what i tried. what i am missing?
thank you so much for the amazing tutorial. it does help a lot especially for beginner like me :)
Hi there, I have used this method for 2 sites and all works well. The only problem is that after some time - a month or so - my instances disappear and the sites do not work anymore. So I need to recreate the instances again. Once I create the new instances however, the old ingress rules are still there. Why would the instances disappear?
For the arm instance i tried plenty of options but i settled with Virtualmin it's the best so far for me, it looks complicated at first but gets easy once you get used to it
What is the php version?
also does it support NGINX?
or does it have something like Varnish?
@@silverfoenix The supported PHP version is 7.4 but you can install other versions by adding ondrej Repository, I am using PHP 8.1 and it's working fine
On the default installation it will install apache you have to choose LEMP instead of LAMP during installation to get NGNIX
There is a tutorial for installing varnish and configuring it to connect with apache but I have no idea if it works with arm64 I haven't tried it
@@quatro286 Thanks, Its always helpful to get information of actual users!
after you added a dns record in namechaep, do you still need to create and add custom nameservers to namecheap like ns1 and ns2?
No, we are using the name cheap dns, no need to change the name servers
Can you add another domain inside CloudPanel and pointing DNS towards this or do you need to set it up also in Oracle?
I have answered this one myself. As long as you point the DNS to CloudPanel it will work when you add another domain
can you make a cheap way to make a mail server (low spec vps no antivirus no antispam) with connection with email client like thunderbird (smtps pops imaps) ? (i have try cyberpanel some times didn't like it for mail server)
What platform are you hosting your email on?
Hey Alex, you have an amazing ability to break things down into simple logic. Keep up the great work! I have one quick question though that never seems to get addressed. We always have the setup addressed but what about the spindown / shutdown / change to a different server? Example, when I signed up for oracle free tier I could not seem to get an Ampere instance to become available so I went ahead and just did an AMD to play with and familiarize, set everything up using cloud flare and sendinblue etc.. Today I was able to get an Ampere instance and would like to move that domain over.
What is the best practice for shutting down a domain on one server if you wish to recreate it n another, when you have SSL set up on cloud flare, and a mail server set up using sendinblue, etc. I don't care about transferring any mail or web files etc. Is it just as easy as deleting the domain in Hestia? Delete the DNS records in cloudflare? And then just rebuild everything?
pretty much, terminate the old one, make a new one and change the IP address in your DNS 👍
@@IdeaSpot well that’s what I did but it felt kine like pulling the plug on a windows box. 😁
Simple solution is sometimes best solution lol!
I finally got ampere instance and followed your oracle/hesitate/cloud flare/sendinblue but could never get the email to work. Would receive but choked on sending. Did it three times got the same result so went back to plan A using my el-cheapo shared hosting with unlimited domains and mailboxes. That works. Not sure where I went wrong on sendinblue.
Mannn.. You are awesome.. Thanks for this ❤️
Really amazing video. I loved cloudpanel better than aapanel. Only issue am facing is the FTP connection. I created ftp user in the cloudpanel admin for the site, but through filezilla am not able to connect somehow. Through the default file manager in cloudpanel I was not able to upload my website backup which was 500mb+ in size.
Any advice on this ? Thank you so much in advance
May need to open port 21 or 22?
Hi Alex, Great Tutorial on cloud Panel, do like to know ,how to add ioncube Loader to this setup , my some sites need ioncube to work.( ioncube works upto 7.4 php only) if you can guide
Nicely presented video. Cheers.
Thank you! Cheers!
please, is there any effective method to setup ftp in this case?
very usefull tutorial, thank you.
can we host in cloudpanel a VPN server such as pritunl
Hi how can i uninstall it ? are there possible add privileges users into phpmyadmin? Thanks Alex always nice videos
Please do a Vultr + CloudPanel setup tutorial.
My WordPress Website is not sending emails from this server!
What to do now?
I followed all the steps and it is working great except for one thing. FTP doesn't actually work even though it is allowed in Oracle (port 20 and 21). Because of this, Wordpress updates also are not working because Wordpress asks for FTP credentials.
How to fix this problem?
it is great video, but as beginner, if he has no custom domain name so how to start, I mean for testing purpose use ip address, how to do that, because when i am going to make wordpress website then ask domain and site name.
First time i see cloudPanel, seems so nice... i will try but about security, can we install csf on it ?
is it possible to add another extra CPU core to an instance that is already created and up running in oracle cloud?
Yes, go to your Instance in Oracle Cloud Control Panel.
Stop the instance.
Click More Actions
Click Edit
And Edit Shape. You can add more OCPU and RAM here.
Once complete, Start your instance again.
Where is nameservers, how can i add another site of my clients
Hi thanks for the great tut, just wanted to ask I want to host multiple WP site with cloudpanel should I chose 1 vm and install cloudpanel or should i add 4 vms separately and install cloud panel on all 4 vms. which do you think is better option for good performance.
Hey Friend i watch your videos regularly i requested that you create a video on How to create RDP on Oracle Cloud
Wonderful work. Please do a tutorial on how to set HestiaCP on AWS. please, m stuck on opening ports and i mixed things up
You are way to nice to be Australia, where did it go wrong? LOL!
Hi. Need a video tutorial for oracle cloud. How to replace the public key shh if the private key shh is lost. Or any other way to restore access to the console. Plz plz.
Thank you for the information.. It's great..
Wow! Always Perfect!
Thanks Alex for a great video! Can I host multiple WP website using cloudpanel? How will I set the DNS, all of them will have the same IP Address?
Yes, it will work fine, your server will automatically send people to the right site don’t worry 😉
Thanks Alex ... can i setup emails on this panel ??
Hey bro , please make a video on installing ioncube loader in cloudpanel
Sir last 1 month I tried many time to make a free tier account and I used many type of credit and debit card but all time payment debited my account and after some time credited also but did not make account. Please help how it is possible.
What would be the best free DDOS and antivirus server software to install, Maybe add a video on server security to your list
Can you make a video how to setup Git and github with this panel?
Thank you for the video, very interesting.
Newbie here... I have installed Centos Web Panel on a VPS and on tope off the A record, I had to configure the Nameservers DNS (NS1 and NS2) also configured on Namecheap.
On your tutorial you didn't show these NS1-2 configuration? Will I have to configure it or isn't it necessary with cloud panel?
I am a bit confused.
Edit: I just read the comments, and this is funny, someone else was asking you the same question ..:) But actually it does not help me, you answered that the DNS are managed by namecheap and therefore there is no need of configuring the NameServers DNS... If you could briefly explain why it is not necessary. I guess i will have to find a tutorial explaining what are the nameservers dns..
Hi, It isn't necessary, I have the nameserver set to namecheap basic DNS: snipboard.io/3XKZvM.jpg
and then enter the records as shown in the video. Have fun :)
Can we also have tutorial for webmin/vittualmin ?
can you make a similar video for setting up mail server , with free and OSS software please.
Keep getting payment errors when signing up for oracle free tier
Great video! thanks Just what i was looking for, however when i try to login to pma i put my user&password i created and it just keeps asking and will not let me in.... any ideas?
@13:26 you get three sets of passwords, need to use the database user/pass 👍
you are great bro i really llike your videos...
i see, it don't has a mail server... and many option missing... Its nice but need to be developed more...
Can you make a video on how to start your own webhosting but with a free hosting panel please.
the best panel for budget vps with 1 core cpu and 2 g ram thank you aapanel is trash
Harsh but fair 😅
Great video. I just wanted to know if my computer always has to be connected to the internet in order for the website to be live.
no! its a cloud instance, its always live, no matter what your own computer is doing :)
Umm. No. If your computer was the hosting server then yes. But as your hosting is on someone else's server i.e. Hetzner - then no.
@@EdwardCox2016 I asked because there was a person who commented in a previous video(similar to this) on this channel saying he noticed his website went down periodically, so he had to restart the server from time to time in order to keep his website online.
Can i create multiple domain accounts?
different domains can be added
I've one request: Could you please do a performance comparison video between a LiteSpeed server and a CloudWays server? CloudWays uses an optimised Nginx, its much faster than default Ngnix, but maybe competitive with LiteSpeed. It would be a great video too because no one else has done it so far I think!
i did a quick comparison in the openlitespeed video: ua-cam.com/video/Nc4gU_X6j_w/v-deo.html (skip to the performance chapter) - I don't think there is any notable difference in the majority of cases, but I think some people like openlitespeed for the included wordpress plugin
also some more nginx v litespeed benchmarks in this one too: ua-cam.com/video/jTsNw7PEygs/v-deo.html (but using plesk rather than cloudways)
Please make a video How to install Pterodactyl on Oracle free tier VPS.
how can i fully uninstall cloudpannel ?
Bro need digital ocean+ cloud panel manual installation video
Hello sir, how to uninstall cloudpanel?
Why would someone choose mariadb over mysql
Both are same SQL database and mariadb created by orginal creator of MySQL and mariadb is lighter and need more less ram and CPU then mysql
@Saptrishi das biswas thanks, so no pros to using maria unless on old hardware or a low budget?
Is it more efficient in performance or just has lower hardware prerequisites
MariaDB often performs better than mysql in wordpress, also Maria is fully open source GPL licence, but mysql has an 'enterprise edition' that gives some extra features. I probably should've used Maria on the tutorial, but mysql was just the first option on the list 😅
also mariadb is opensource, mysql standard edition is not, but mysql CE (Community Edition) is also opensource.
@@_Trakman no thats not mariadb is more optimized database and if you have multiple connection on database MySQL is getting slower that means your site getting also slow but mariadb can Handel multiple connection with out loosing performance
For anyone banging their head like me you need to run the command "sudo apt reinstall systemd-timesyncd" before installing cloudpanel, otherwise it says installation complete without actually being installed.
Can you test CapRover?
great tutorial
Please create tutor for mail server postfix in oracle linux arm base sir
Can't we install this with 1GB of Ram?
Recommendation from CloudPanel documentation is
---
Operating Systems
Ubuntu 22.04 (Jammy Jellyfish)
Debian 11 (Bullseye)
---
Architectures#
X86
ARM64
---
Cores#
>= 1 Core
---
Memory#
>= 2 GB of RAM
---
Disk#
>= 10 GB
---------
It's very lightweight so I believe it will run on 1GB - but recommended is minimum 2GB.
@@jonaspudas9988 I installed it on 1GB ram, and it worked smoothly. Thanks a lot.
Amazing 🤩
Is there a one click NextCloud!
many places have one click nextcloud, vultr, linode, digital ocean etc.
but the regular nextcloud install isn't too hard anway
Is crypto mining allowed on Oracle?
Thank you
getting error 500 on php installer. FUCK!
Good Video!
God bless you bro.
ho configure the ftp acces
wtf you didnt even levave the panel link where to sign what website LOL
Cloud panels file manager sucks, can't even able to do proper changes.