Vodafone Smart Ultra 6 Screen Replacement
Вставка
- Опубліковано 18 жов 2024
- ✅ Screen HERE 👉 s.click.aliexp...
❤️ Become an EXPERT👉👉 movilone.eu
What does it consist of?
We replace the full screen (LCD + Touch) of your Vodafone Smart Ultra 6 with another that is in perfect condition and we do it in the shortest possible time.
Important note: Both the touch and the LCD layer are stuck at the factory so they can not be separated without risking breaking both. This is why in this repair will have to replace both parts even if one is not damaged.
Troubleshooting
Reproduction of unclear and poor quality visual content
Poor or nonexistent operation of the screen.
Incoherent figures and colors appear randomly on the screen
External glass breakage
Spare parts
To increase the efficiency of our interventions, we use only original parts to ensure maximum compatibility between the part and your mobile.
*✅ Tools HERE* 👉👉 https:movilone.eu
Great video and very clear.
My screen has lost sensitivity and I cannot use the keyboard in the bottom left corner. Is it likely that I need to replace the full screen or tear down and clean that part of the phone?
Thanks. Need to get mine open as battery has swollen.
Thanks just replaced using this video :)
Is the new screen adhesive from the factory, or does it need that special double-sided tape (or adhesive gel)?
I have a cracked touch screen on a Vodafone Smart V8, i assume the procedure isn't that different, but i can't find any information regarding the way the display sticks to the body of the phone.
Thanks in advance!
John
Hello, John! Normally the screen comes with its own glue, if it is an original screen, but nevertheless our technicians always put a bit of B7000 too, to get well atached the screen of the frame. Have a nice day
www.MovilOne.es
Hello, I followed your video to replace my broken screen replacement and it worked just well. I have an issue tough : the lower part of the touch screen is not working , not allowing me to unlock the phone with the sign :( I have repoened the phone and checked the lon flat cable connection , but apparently everything is correct. Any idea? Thanks
Fabio, to rule out that it is not a problem of the spare (full screen) would be necessary to use another spare and find out if the same thing happens. From my experience, I think it's a problem of the spare more than the phone if everything is embedded allright... Good luck!
www.movilone.es
I bought another spare screen , mounted and all it's allright now !! Fortunately my phone is ok, I will try to return the broken one to China seller :))
Thanks for your attention and help
Thank you too, Fabio for your comment! Best regards
www.movilone.es
Gracias socios ! ;)
Gracias a ti por comentar. Un saludo.
www.movilone.es
I didnt get what happened at @2:30 ? You took off the piece of black plastic, then pointed at the charging port and speaker...then replaced the black plastic before changing the screen? Why do that?
I have dust particles around the edges of my screen, equally the same all the way around. I wondered if there is a way o getting them out without having to buy any parts? I think it could be affecting the keypad as sometime I type and it won't select the letter I need, so I have to push harder.
DPandaC :D, According to the information provided, I think you have no choice but to open the device and clean it well with isopropyl alcohol, in the end the screen will be damaged and it will cost you more work to use it... Thank you for asking! Best regards
MovilOne Hey, thank you for your reply!
Is it possible to access the lcd touch screen piece from the back side of the device (by lifting the frame off or something?) rather than the top where I have to prise the glassoff its adhesive? As I don't have any new adhesive nor can I afford any at the moment.
I'm pretty good with smart phones etc but I wanna be extra careful with mine haha. (Just pulled apart and put back together a dripping phone I found so I could dry it out to find the owner, success)
After replacing the lcd/digitizer assembly my phone is not showing anything on the screen. The lcd is not damaged because the one that had the glass broken dosen't work aswell . Could'v i disconnecten something or not do somethig appropriately? Can you please help a fella out?
Hello, Vlad! The one that is broken, that you want to change, doesnt work, but that does not mean that the one you want to use as a replacement can not be broken (by the manufacturer or seller); it s also happens to us so i advice you to try another replacement from another supplier. Let me know if it works.
Have a nice day!
www.movilone.es
Reparacion moviles Granada MovilOne the thing is that the phone was working fine until i plugged in the new screen the old one was working but the glass was heavily scrached. And i don't think i damaged the motherboard in any way . Could it be a comnection problem or a software problem?
Vlad, you should verify the flex of the screen if is well hooked to the motherboard...and if is it, it s probably that you ve got a backlight problem...Let me know, anyway :)
Oye tengo un problema aver si me echas una mano o me orientas un poco, ya es la segunda pantalla qe compro y lo que sucede es que parpadea la pantalla para desblockear aveces le cuesta muchisimo el brillo tengo un descontrol osea qe subo 1% de la barra y parece q vaya al 80-100% anterior mente ya le cambie la pantalla depues de la original pero la lleve una tienda y todo ok pero esta vez lo queria hacer yo y me da estos fallos alguien medice que pasa? Y aveces tambien cuanfo desblockeo el movil hace una pequeña bibracion y luego se desblockea
Hola. Normalmente el repuesto es de mala calidad. Un saludo.
www.movilone.es
Why not just remove the battery, as that is the only thing blocking access to the lcd flex? A full strip down seems extremely unnecessary and a waste of time.
Gonemechanix, this tutorial can serve other users who are looking not only to change the screen on this device. Thank you for your comment! Best regards
You have to remove the mother board and battery at least
😅