MJJC Foam Cannon Pro V1 vs V2 - Is the new one better?
Вставка
- Опубліковано 29 сер 2024
- MJJC Foam Cannon Pro V1 vs V2 - Is the new one better? I do a comparison between the old and new versions of the MJJC Foam Cannon Pro to see if the new version lives up to the brand’s claims for thicker foam. Also, we compare them to the TriNova, Griot’s Garage Brilliant Finish and MTM PF22.2 foam cannons!
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOr...
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
MTM PF22.2: bit.ly/3ppTFPI
MJJC Foam Cannon Pro v2: amzn.to/47sSzak
TriNova foam cannon: amzn.to/3CdeOE9
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3YkTEwZ
Chemical Guys Big Mouth Max Release Foam Cannon: amzn.to/3YoCIpF
Adam’s Mega Foam: amzn.to/3fWtHAg
Kranzle 1122TST pressure washer: bit.ly/3d5kZeK
Kranzle 1122TST plus upgraded Mosmatic gun and wand: bit.ly/3vj0Zzz
Mosmatic gun and wand solution: bit.ly/3aA67oE
Other good pressure washers: bit.ly/3M8J32M
Phoenix EOD Apex Auto Wash shampoo: amzn.to/43OGTNA
CR Spotless water deionizer system: bit.ly/3AMsMKf
🇨🇦 For people in Canada:
MJJC Foam Cannon Pro v2: bit.ly/3ltOq3r
TriNova foam cannon: amzn.to/3KxSJF2
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/2W4vqMA
MTM PF22.2: bit.ly/3pqcQsR
Kranzle 1122TST pressure washer: bit.ly/3MgYINZ
Mosmatic gun & wand solution: bit.ly/3EBUZbI
Other good pressure washers: amzn.to/3ZIXtw6
Phoenix EOD Apex Auto Wash shampoo: bit.ly/3HXst6p
CR Spotless water deionizer system: bit.ly/3iRQ8bd
🇬🇧 For people in the UK:
MJJC Foam Cannon Pro v2: bit.ly/3A7BFzv
MJJC Foam Cannon on Amazon UK: amzn.to/3Gj641H
MTM PF22.2: bit.ly/3AB0Bkh
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3cpoleD
Phoenix EOD Apex Auto Wash shampoo: bit.ly/3nCV2O6
🇫🇷 For people in France: c3po.link/Qu6F...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Using a foam cannon is a technique from the pre-wash stage where you blanket the vehicle with a layer of snow foam, to help lift and encapsulate loose dirt and debris before you do the contact wash. This method is to reduce the chances of getting swirls and scratches in the paint.
✅ Foam Cannon Battle video: • FOAM CANNON BATTLE !! ...
✅ How to use a foam cannon + TriNova review: • FOAM CANNON CAR WASH T...
✅ Foam cannon (pressure washer) VS foam gun (garden hose): • Foam Cannon VS Foam Gu...
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicso...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on UA-cam, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganize...
🎥 List of equipment I use to produce my UA-cam videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganize...
🎶 Intro music by Hurley Mower
/ hurleymower
#MJJC #FoamCannon #V2 #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing
⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇
🇺🇸 For people in USA:
MTM PF22.2: bit.ly/3ppTFPI
MJJC Foam Cannon Pro v2: amzn.to/47sSzak
TriNova foam cannon: amzn.to/3CdeOE9
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3YkTEwZ
Chemical Guys Big Mouth Max Release Foam Cannon: amzn.to/3YoCIpF
Adam’s Mega Foam: amzn.to/3fWtHAg
Kranzle 1122TST pressure washer: bit.ly/3d5kZeK
Kranzle 1122TST plus upgraded Mosmatic gun and wand: bit.ly/3vj0Zzz
Mosmatic gun and wand solution: bit.ly/3aA67oE
Other good pressure washers: bit.ly/3M8J32M
Phoenix EOD Apex Auto Wash shampoo: amzn.to/43OGTNA
CR Spotless water deionizer system: bit.ly/3AMsMKf
🇨🇦 For people in Canada:
MJJC Foam Cannon Pro v2: bit.ly/3ltOq3r
TriNova foam cannon: amzn.to/3KxSJF2
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/2W4vqMA
MTM PF22.2: bit.ly/3pqcQsR
Kranzle 1122TST pressure washer: bit.ly/3MgYINZ
Mosmatic gun & wand solution: bit.ly/3EBUZbI
Other good pressure washers: amzn.to/3ZIXtw6
Phoenix EOD Apex Auto Wash shampoo: bit.ly/3HXst6p
CR Spotless water deionizer system: bit.ly/3iRQ8bd
🇬🇧 For people in the UK:
MJJC Foam Cannon Pro v2: bit.ly/3A7BFzv
MJJC Foam Cannon on Amazon UK: amzn.to/3Gj641H
MTM PF22.2: bit.ly/3AB0Bkh
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3cpoleD
Phoenix EOD Apex Auto Wash shampoo: bit.ly/3nCV2O6
🇫🇷 For people in France: c3po.link/Qu6FkUYM22
✅ Foam Cannon Battle video: ua-cam.com/video/wF5pDPE7vr0/v-deo.html
✅ How to use a foam cannon + TriNova review: ua-cam.com/video/Qo2WQPRF-Ws/v-deo.html
✅ Foam cannon (pressure washer) VS foam gun (garden hose): ua-cam.com/video/rJPk8nR8Ib0/v-deo.html
Bonjour je me demandais a quand en français? Merci
Il m'est rendu impossible de produire des versions bilingues pour chaque vidéo malheureusement. Une seule vidéo peut prendre 10 à 15 heures à produire, alors tout recommencer en double à chaque fois est impensable. Aussi, 90% de mes auditeurs sont anglophones, donc mettre 100% d'efforts et d'énergie pour 10% des résultats en français n'est pas viable.
Il faut garder en tête que je ne suis pas le seul UA-camur à parler plus d'une langue, et pourtant, je suis le seul à produire des vidéos bilingues. Ça démontre à quel point ce n'est pas aussi facile qu'on pense produire des vidéos UA-cam.
C'est la chose la plus difficile que j'ai faite dans ma vie bâtir cette chaîne. Un effort surhumain de plus de 7 ans pour se rendre à ce point. Je n'ai jamais manqué une seule semaine d'afficher des vidéos depuis la création de ma chaîne.
Ceci étant dit, je continuerai à produire des vidéos françaises lorsque possible. Merci de ta compréhension.
I have version 1. Works great. I agree the new version lays it down thicker but not enough of a difference for me to buy the new version.
Hi Pan. I’m the retired CPD officer you met at the Bays in Romeoville. Nice demo. I went down the same rabbit hole as most detailers seeking the greatest foam. One of my oldest cannons finally bit the dust and I have the excuse I need to buy the new model. Thanks!
I absolutely remember you Keith! I hope you're having a great day.
I just started detailing my own car 2 months ago. I got the triniva foam cannon, it was very runny. I picked up MJJC 2.0 a month ago. It was night and day comparison. I returned the Trinova back to Amazon. I love the video you put out, Pan. Thank you for all the tips and demo you do.
Thanks! Welcome to my channel. You discovered one of the biggest car detailing channels on UA-cam as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
This is a very impressive improvement! My first thought was the rear of the car might have had some more road film due to being the rear of the car but the hood demo dispelled that right away. They may have overstated some of the benefits of the newer model but they sure made some significant improvement in sheer volume and richness of foam!
Hi Pan! Thanks for all your videos. I'm a mobile detailer and learned a lot from your vids. I recently bought the MJJC Pro 2 and it's amazing. Absolutely no need to look any further as this will be my go to foam cannon. Keep up the good work!
Thanks Ralph! How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on UA-cam as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
@@PanTheOrganizer About a year ago i wanted to start a business here in The Netherlands. I found a random video about car detailing and just by searching for advise about products, tools and equipment I found your chanel. The detailed information was, and still is, very helpfull.
😁👍🏻
My first cannon was the Griot's brilliant finish based on the last comparison video, but it never worked right, even right out of the box. All it would ever produce was soapy soup. I probably should have sent it back, but I replaced it with the MJJC v2, based on JoshV's claim that it was the best foam cannon he had ever used. It didn't disappoint. Good to see that it's a definite improvement over the v1 unit.
I'm still rocking the Griot's and after a year of weekly to bi-weekly washes it is still going strong! Love it!
👍🏻
Hi Pan, the claims on the box are compared to the standard Foam Cannon S (not the S v3.0) and the standard Foam Cannon Classic. If you have the box of the Pro v1.0 yet, you’ll see the same claims. So the claims on the box of Pro v2.0 are the same as on the Pro v1.0. In the meantime, they’ve released an S v3.0 (not Pro v3.0), which costs the same and performs the same, but have a few differences (colour, the bottle etc.). Tested those compared to each other, in case you are interested. One more thing about the latest Pro v2.0 (which technically should be v2.1, as they’ve made changes to the original v2.0 also): They don’t include the metal mesh anymore, as according to MJJC, you don’t need the spare anymore, just need to run clean water through, when you finished using it. The Foam Cannon Pro is my absolute favourite for some time :) Thanks for the review ;)
Thanks for sharing this info!
just bought v2 to upgrade from an old no name cannon. thanks to your videos. can’t wait for a break in the rain to try it tomorrow
Thanks Keagan!
I was actually surprised how much thicker the foam was on the version 2😯. If I was on the market for a higher end foam cannon, the MJJC V2 would definitely be on my list of potential foam cannons to buy👍🏻. Great video Pan!
What's your current foam cannon?
@@PanTheOrganizer My current foam cannon is by Autoglym, a british manufacturer, I bet you've heard of them. They also make other detailing products, waxes, sealants, the whole nine yards.
Yes they are popular in the UK.
I bought V2 based on a previous review you had done. I love this product. It works great. Thanks! My mustang PP2 loves this
Thanks for sharing your personal experience with it Matthew! What is your go-to snow foam?
Definitely more foam on version 2! These are definitely good units. Great video pan!! 👍🇨🇦
Thanks!
I’m actually in the market for a new foam cannon so this video hits right at a good time! I have seen the first version on some other detailing videos AndRem Details used one ☝️ and get great results with his. So informative my friend 👏I always look forward to any of your new uploads. Thanks for testing these products out for us to watch!👍
My pleasure! And thanks for your continued support Danny.
@@PanTheOrganizer Hey I’m your number one ☝️ fan ☝️😂
Let's go!
I have the V2 and love it, lots of creamy foam, truly love it 😉👍 if one day I have to change it, I'll probably go with V3 or what's version they're up to, love the big opening to put soap in it, MJJC all the way 😀
Thanks for sharing your experience Yves!
I bought a V2 a few months ago and it works like a champ. I highly recommend it.
Thanks for sharing your experience Zach.
I was looking forward to buying the MJJC foam cannon and was thinking about either V1 or V2 and was pretty confused but then I said to myself that Mr. Pan would definitely have a video on this topic and I wasn't disappointed. Now I've made my decision for going with the V2 and I will also share my experience as I have a low bar pressure washer and have struggled with the quick connectors for it because these parts are hard to come by in Pakistan. Again, awesome video. Much love to you Sir and you have educated me alot. Thank you.
Thanks Zeeshan!
The best just got better. Have both, always loved the V1 but the V2 is awesome. Used the MTM for a while, the small mouth was annoying, the metal top on the plastic bottle would constantly overscrew, and the foam quality was less consistent than the MJJC which gives thick, rich foam every single time. MJJC all the way for me! Apparently the new V3 S model has a quick release cap and the same workings as the Pro V2. Might be worth checking that one out if you haven't yet Pan.
Thanks for sharing
I have the MJJC version 1. Very happy with it. I also have the one made in Italy. I love them both. I may give my brother in law MJJC version 1 and buy version 2 for myself. He doesn't have a foam canon so I know he would appreciate it.
Right on
Yasoo Pan!! I had bought the Griot’s foam cannon after seeing your review on it. I am extremely satisfied with it but the only issue I had was with the weighted ball. It started rusting after the third or fourth month of use but still makes great foam.
What snow foam were you using in there?
I have the version 2 and find it brilliant. Only issue is i had a pin sized hole in the brass but soon fixed with a blob of hot glue. Great video pan, greetings from the uk.
That pin sized hole is to allow air in as the container empties, so that it doesn't create a vacuum.
Edit: Oh you said in the brass, I was thinking of my foam cannon with a brass base. This one has a plastic base.
Weird
@@volvo09 yeah, it suddenly appeared and was spraying a fine mist of water all over my face when I used it. The glue worked a treat 😁
@@stephenjames6534 hahaha! That would be annoying!
Thanks for sharing
Still love my tri nova. Totally agree with ur choices and comments on mtm.actually got my mtm with their stubby 4 100 bucks during last holiday season was a steal and bought it
Yes that's a great foam cannon too.
Un autre banger Panner..
Lately, I've been turning my dial to a runnier setting for the first time around the vehicle, let dwell 1-2 min, then turn the dial to a "shaving cream" setting and foam it thick before washing and voilà ,all clean..
👍🏻
I have the MJJC V2, awesome foam cannon, I had lost one of the little red plugs in the lid while cleaning it, I’m not sure what they do but I just ordered more from MJJC, after they arrived my son looked down on the garage floor and found it lol, I don’t remember but the unit may come with extra red plugs, oh well I have extra lol, great comparison Pan, thank you 😁👍
Thanks Dave!
Never tried V1 or V2 but I picked up the V3. It’s freaking sweet.
There's no Pro V3 out yet, you're referring to the S series which is incomparable.
I have version 2 and I swapped into the smaller orifice. It works great and I’ve never tripped my 15 amp breaker
Hi pan just a short note I have done a couple replays from when you sent one to me all the best Stewart wrote a few things down that I didn't want anyone else to see 👍
Pan I am still surprised that MTM has not gone to a wider opening on the bottle. Again an informative video Thank you
I am still waiting for them to produce a wider moth version too.
As usual Pan does an amazing job with the unbiased comparison of the MJJC V2 . Can't believe the ugly steel rims on the car though😀 I do have a question. Wouldn't the V1 with the more runny foam help to dislodge the dirt on the car better than if the foam is "sticking" to the panels?
Hehe those were just the winter wheels. A popular option in Canada, to avoid damaging the nice summer wheels. As far as the debate of runny vs thick foam, that's up to you to decide. ;)
Thanks pan I recently purchased the mjjc ver2 from Carrzilla a month ago on sale will be using on the truck and trailer this weekend great video 👍
👍🏻
I strongly recommend a 1.35 orifice to avoid tripping a breaker/blowing a fuse if you only have 15 amps. It still makes tons of foam.
Thanks for the comparison pan... good visual demonstration!
Thanks Robert!
I was going to order the Mjjc but was going to take a month to get it so I got the Groits Boss and it works great, I did put in the smaller oriface that comes with it because I have a small 2300 psi electric pressure washer
Have them all including Mtm. My opinion the Mjjc v3 is the winner. Thick foam. Did I say thick foam I mean it’s unbelievable compared to Mtm. The quarter turn neck is an absolute magical to use. and clear bottle, great to see clearly and no discolouration on the clear bottle, even high alkaline stored hasn’t discoloured or staind it 10/10
Thanks for sharing your personal experience Aaron!
This is a fun video as everyone loves foam. V1 puts out the foam I prefer but V2 should be able to match the consistency of V1. The open mouth and ball at the end of the straw are nice features. I personally use the MTM and it works well and the parts are easy to replace. The mouth is way to small as I have to use a funnel to poor in the soap. Thank you for a fun video and I hope your avoiding all the smoke. We have some smoke here in Nashville and it does leave my cars a mess.
Fires are raging in many forests in North America. :(
Yeah I love my MTM too. I wish they’d come out with a new version with a wider mouth.
I’ve got version 2.0. I also had the Adams premium foam cannon which I thought was really a good build quality too!😂
Which is your favorite one?
@@PanTheOrganizer I like the MJJC Pro V2! Adams premium is my second favorite for sure!
When I just got the V1 just yesterday 😢
You are fine with V1, you will still get the same result in hte end. The car will be clean.
No worries, you got a food foam cannon.
I bought mine 2 months aga😅
If you bought it two months ago, shouldn't you have the new version? The 2.0 was released last year.
Always happens! 🙄 it’s a really good cannon I just hate how much it leaks
Got MJJC Pro 2 and teally love it
Cool!
What a difference. But they both do look good. Nice one Pan!
Thank you! Cheers!
Love this foam canon. Wish they would have done something different with the twist knob. Made it click in place when you adjust the amount of foam that comes out.
Thanks for watching!
The company raised the price by 10-12 US dollars since your videos. I don't know if it's worth it. I love my Griots foam cannon that I got on your recommendation!!
Outstanding review and comparison. The MJJC Pro V2 is so impressive. The link is to a Swift brand foam cannon so is that incorrect?
It's essentially the same foam cannon (as the MJJC isn't available on Amazon).
They did a release a newer one available on Amazon, the MJJC Foam Cannon S v3.0 here: amzn.to/3QBzqOG
I reviewed that against the Pro v2 in this video: ua-cam.com/video/L-3608MjklU/v-deo.htmlsi=t-FoC_4RDouJ6gZw
Never tried these cannons before..still using my MTM 😃
if the foam is runnier on 1.0, wouldnt it be removing more stuff from the bodywork since it well... is runnier ? the v2 kinda just sticks.... hmmm...
So I have the MJJC 2.0, The MTM &, I also have Adams standard foam cannon the first foam cannon that I purchased because I was cheap and I was first starting out. Now I use my MTM’s faithfully and I love it but my MJJC 2.0 needs new filters in less than a year. I know it has a different filter set up.
Pan if you’re reading this, maybe you can do a filter change video for others to know because there is a difference. Just saying thank you again love your videos always 👍
Hey Pan! Thanks for the great video, so appreciate it. In my opinion, its not enough to compare the foams. I think you missed the most important to compare. Which one cleans better??? Thicker foam doesnt mean it cleans better. Please next time take some dirty car and check it by washing after the foam.
We did not talk about cleaning, as that's not the purpose of the video. What does the cleaning is the snow foam, not the foam cannon lol. The foam cannon simply lays down a layer of foam. It doesn't matter if it's thicker or runnier if you're using the same snow foam. What matters for cleaning potential is the actual chemistry of the snow foam itself. And I already have plenty of videos on that topic.
Hey Pan, quite impressive improvement! I noticed in the description the hyperlink for Phoenix EOD Apex Auto Wash isn’t there like the other products. Could you add it in?
Thanks so much appreciate all you do for everyone’s benefit. 🙌🏼🙌🏼🙌🏼
I missed that! Hehe thanks for the reminder. I added the link.
You convinced me to get 1.0 3 years ago, and I'm convinced I want 2.0 lol
They are very good foam cannons indeed. But the competition is red hot!!
both produced amazing foam to get the final results of nice clean paint
Thanks for watching David!
Vidéo très intéressante encore une fois, merci pour le comparo et tes précieux conseils🙂
Merci Stéphane!
Ive got the Pro V2 but also the S V3.0, which i found the internals to be the same. At least you can see that they did make a change from V1 to V2 👍
Yeah it seems to me that V2 vs the regular S V3 is mainly about the bottle difference.
@@PanTheOrganizer yeah definitely looks that way. Not sure why but I keep going back to the Pro V2 tbh.
Great comparison! I’m purchasing version 2.0. Always OCD about thicker foam. Hey this looks like Andy’s car! Where the heck is Andy today?? 😂
That's not Andy's vehicle. He drives a Mazda CX-5. The vehicle in the video is my girlfriend's Nissan Rogue.
Another awesome product review and comparison video good friend
Thank you! Cheers!
Is thicker foam necessarily better? I sort of like how version 1 is a little runnier since I usually do a foam pre-wash before rinsing and doing a contact wash. Does the runnier foam drip more grime off the paint than the thicker foam which just sits there???
Some people like runnier foams, some like thicker foams. Up to you to see what you prefer, according to which snow foam you are using.
they should've incorporated the top from the MJJC S V.3.0 that only needs a qtr turn to lock not really any threads to strip so it'll never break. that's the one I use. mjjc S v 3.0. I love it
I'm sure they'll come up with version 3.0 of the Foam Cannon Pro soon.
Wow , nice video pan, i have v2 , this my favorite foam cannon 😍
Thanks Krisna!
Please do a foam show down with MTM and the MJJC Foam Cannon Pro V2.
Pan, great review and comparison. I purchased the version 2.0, and I'm very pleased with it. Question, do you prefer a wet surface before foaming or dry? It seemed the foam stuck to the surface longer on the dry side. I can only assume that is better. Not a pro here, just an enthusiast.
It doesn’t really make that big of a difference. See my video on that topic: ua-cam.com/video/16SwGBQ29rs/v-deo.html
The biggest difference for the pre-wash is what snow foam you pick. See my video: ua-cam.com/video/I7z8ajojRVI/v-deo.html
Awesome review pan!!
Glad you enjoyed it!
I have the v2 and the new S v2, both are great and produce nice foam. I like the thicker foam as it lets me get around the car while there is still some soap on the panels.
👍🏻
is the s v2 similar to the new pro v2 ?? (i have the s v2 now) as far as foam production, or close enough ?? the s v2 seems nice, 1.1 installed for a ryobi, i'll swap if i use it on my gas one.
@@JoelSc14 The S v2 does have its differences. I have a video of it on my channel. I really like the quarter turn for the head of the unit to the bottle. The foam output is just as good as well.
@D & D Auto Detailing so foam is similar with the s v3 and pro v2 ?? Thanks 🙂
@@JoelSc14 yep! Foam is just as good from my experiences 👍
Thanks Pan
You're welcome!
Thanks again Pan, I spent the extra on version two and it's nice to see it validated.
Thanks for watching!
Pan,just say thicker or foamier,don’t add “more” LOL!love u Pan,I’m buying the 2.0 thanks to your review
Enjoy!
On V1.0 yo7 have to use the 1.1 mm orifice to get shaving cream thickness. V2.0 is MUCH thicker with a 1.1 than the pre-installed orifice. So far my V2 outshines all the others I have tried(Griots Boss foam cannon performed similarly)
The 2.0 is still my favourite foam cannon
It's very good.
Most of the stock on the market now is V2 and V3 is on its way 😉
Hi Pan Great video as always,but just as a rank amateur I was just thinking isn't the whole purpose of using a foam cannon is to have the foam bind as much as possible with the dirt and run off ?
If a contact wash is always necessary to get rid of the film of dirt anyway,what's the point of foam sitting on the surface? What's the point of foaming anyway? Initial rinse,contact wash seems more logical to me.
There’s a lot more to it. Here are a couple videos I made which should show you how snow foams can be very important as part of an effective pre-wash:
ua-cam.com/video/I7z8ajojRVI/v-deo.html
ua-cam.com/video/8j5dJUM8Fb4/v-deo.html
@@PanTheOrganizer Thanks Pan.Very informative.
My pleasure!
Impressive improvement 🤞
Thanks for watching!
I have the MJJC V1 and I don't rate it at all, I prefer my cheaper Italian PA cannon from Autobrite Direct (in UK), main difference is the MJCC uses twice as much product, I can only go around the car once with the MJJC but I can go around twice with the Italian PA.
Pan would be interesting to know if the product usage on the MJJC V1 & V2 are different.
Good stuff now just finding the balance... What do you think Pan... Need some run off incase of any heavy dirt or particles... Keep up the good work 🤙🏻🤙🏻🤙🏻
Thanks Justin
Great video demonstration 👍🏻
Thanks 👍 Welcome to my channel. You discovered one of the biggest car detailing channels on UA-cam as we surpassed 900,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
I'm all for quality products, but is there really that much of an increase in quality for a foam cannon to justify the huge cost difference between them? The amazon one I use only costs $30, works great and I cant bring myself to spend more for a big name brand one.
Not sure if v1 has it since I don’t have one, but v2 has an inside thread under the cap that can also take standard size bottles like a 16oz bottle. Can you confirm if v1 has it also?
Hey Pan, I live in the Mid Atlantic and we have been experiencing the smoke from the wildfires in Canada. What can I use to wash the ash particles off of my vehicles.
Now you need to v3 to compare them all
I'm using a Karcher K7, so I'm wondering if it's better to use the MJJC 3.0 S with the pre-installed orifice 1.25 or to use the 1.1? It's clear from the video that 1.25 is ok for K7, but I'm not really sure because I wasn't fully satisfied when I used MTM HYDRO SNOW FOAM with 1.25 from a friend. Thanks PAN.
You'll have to test for yourself and see. Start with the stock one, and if you like the foam output, stay with it.
Hey great video Pan! Can you recommend some quick connectors in Canada for pressure washers. Or does it matter? Thanks!
The foam cannon comes shipped with the 1/4 inch quick connector.
Thank you Pan for your awesome videos. Quick, question, what car shampoo did you use in this video? 1 or 2 oz? Thanks in advance
Thanks Finito, but I'm a little disappointed in you, as I gave the answers to your questions very clearly in the video... Here: ua-cam.com/video/urkNdvXufJo/v-deo.html
You have to watch my videos from beginning to the end. ;)
I also placed the links to the all the products including the shampoo, in the description under the video.
@Pan The Organizer I really apologize, I stepped out for a minute to check out on my kids. Thanks for the quick reply and your patience. You're the best 👌
Hehe no worries. Family first! ;)
I hope you enjoy my videos. 😁👍🏻
Hey Pan any chance you can tease us for when your best of 2023 Products video might be coming ? 🙏🏼
At the same time like every year. End of August to early September. It will be a mega one this year!
@@PanTheOrganizer awesome man can’t wait super excited !
😁👍🏻
Which foam do you prefer on a vinyl matte wrap? Is Chemical Guys Mr. Pink good enough for a maintenance wash?
Any pH neutral snow foam with no wax in it, and no gloss enhancers, will do. Not sure on the Mr Pink though as their shampoos and snow foams usually have gloss agents.
If you want to stay within the CG line, at least use their matte shampoo here: amzn.to/3CkL0Fu
But I would recommend something like this: amzn.to/3Ch3O8K
Or this: amzn.to/42wN47S
See my matte care tutorial: ua-cam.com/video/5RocSxJQmzI/v-deo.html
Pan, was there any difference in the quantity left in each cannon after you did the passes on all 3 surfaces ? Did v2 consumed more product ?
Not really
Ver.2 already available in Japan? I'd not like to go get the old Ver.🤔
What happened with the caps on the rims? What's the story there? Not used to seeing that fantastic job though! Thank You!!! One last thing is that V2 sounds quieter than V1.
These were just the winter wheels on my girlfriend’s SUV (this was filmed during winter). A popular choice in Canada to help protect summer wheels.
Great comparison, I have the v2. Pan, don't know if I missed it, but do you have the foam adjustment on both cannons at the extreme clockwise position? Thx.
I have them at max foam output, always.
Hey Pan, what are the differences between using a foam cannon with pressure washer & a pump foamed like a Marolex 3000? Ty.
The pressure washer and foam cannon setup will always generate the most foam and performance, and speedier application, compared to a regular foaming pump sprayer (that you have to manually pump) or a regular foam gun attached to a garden hose.
If you already have a pressure washer, get a foam cannon.
Completely off topic but I am opening a shop in hopes of moving away from mobile service. Have you ever used a water containment system?
I haven't.
Are v1 & v2 brand new? I wonder if there is some kind of maintenance to be done after some time using a foam cannon. Maybe that would explain some differences? Also the type of emulsifier?
Zero maintenance if you care for them. After using the foam cannons, I always flush them by putting just warm water in the container, and running it through for 30 seconds, to flush any potential soap residue out of the head. Let air dry, and you're done.
At which dial setting do you keep your mjjc cannons? all to the + or to the -? I'll go to calculate PIR for BH Auto foam (and I also use GSF) so I want to set it the best before calculating the output! Thanks!
I always set all my foam cannons for max foam output. Dial to the max on the side that gives the most foam.
@@PanTheOrganizer ok thanks Pan, so I guess it is fully clockwise (+) on the MJJC!
What I'd like to know is did the version 2 use more solution than version 1?
Nothing noticeable. They seem identical, but I didn’t do premcise measurements as I didn’t feel the need to, as I could coat a vehicle with the same amount of solution with both cannons and still have the usual amount left over.
7:48 that's my biggest gripe with the MTM bottles. I hate that tiny opening.
I agree, they need to make a big mouth version soon. The competition is heating up lol.
Would be a better comparison if both cannons were out of the box brand new. V1 may have soap residue in the mesh.
It has always performed identically. And I always clean/flush my foam cannons after each use so no soap residue.
Also, all the other channels that have tested v1 vs v2 came to the exact same conclusion. Yes v2 produces thicker foam. Even a blind person would notice that.
I thought this, too. The V2 is newer so it should perform better than a used V1. Even if it is rinsed out every time. I bet water hardness factors in, too.
Hi Pan got a Question:
I have a new used matte car and purchased gyeon matte. While decontaminating, prepping the car I noticed low hydrophobic properties on the car. This made me think car is already coated but fading away. Since I cannot polish matte paint for removing existing coating. Can I apple Gyeon matte, directly on this panit? Will it bond?
Iron- tar - clay steps are done.
Hard to say as I don’t know what protection was on there. Do a full wash with a decon shampoo like CarPro Descale to strip older protection, then iron remover, then use a paint prep spray like CarPro Eraser or Gyeon Prep and then apply the matte coating.
See my matte paint care tutorial: ua-cam.com/video/5RocSxJQmzI/v-deo.html
@@PanTheOrganizer Years pass, and you still answer questions. Hope you will grow more. Thanks...
Thank you! Yeah I can spend up to four hours every single day just replying to UA-cam comments. I'm the only big detailing channel that does that. I like being close to my audience and I think that's one of the things that sets me a part from the rest: my accessibility.
It does get overwhelming at times, as you can imagine, with almost one million subscribers sending me thousands of messages and emails daily across all platforms, so I can only reply on UA-cam, as I would die trying to reply to everyone on every platform hehe. But I'll continue to reply on a daily basis for as long as I can.
Have a great weekend!
Hi Pan - I had a major issue with my Griot's foam cannon (only sprayed water, the soap mix didn't come up the straw), so I'd rather buy next one in person. What is the best foam cannon that I can buy by walking into a store (Toronto)? Thanks in advance.
I don't buy my products and equipment in stores, as big box stores rarely have the enthusiast or pro grade stuff. I order online. Links in the description under each of my videos.
Also, I don't know which store you shop in, and it might not mean we have the same stores in Quebec unfortunately. Ordering online not only gets you the best price, but the best selection as well and access to things not found in stores.
Hi sir, after seeing ur videos I have applied turtle ceramic coat 2 coats. What is the time interval if want to apply again can I apply it again after every 3 months. Thanks
Yes you can apply it in 3 months no problem. You can even apply every month if you really want to.
@@PanTheOrganizer thanks sir
Does anyone know what the red plugs are for in the lid? Mine have fallen out and lost😢
Hi pan can you tell me what to look for when buying a vaccum Cleaner for car like specs, features...
You want something with at least 4HP of power, at least 4 gallons of tank capacity, and a vacuum that can do both wet and dry vacuuming. Here are some recommendations:
amzn.to/43T18K4
amzn.to/3qCh2KN
amzn.to/45YCE4e
@@PanTheOrganizer Thank you so much pan ☺👍. You help me a lot...
Quote from Amazon listing as of 6/11/23...
"Currently unavailable
We don't know when or if this item will be back in stock."
What’s the difference between mmjc pro v2 and mjjc S v3.0 (blue clear bottle)
ua-cam.com/video/NQUWSU4yuFk/v-deo.html
Was the MJJC V2 in this video used with the oem orifice or did you add the 1.1 orifice?
Stock orifice. I never change orifices.
@@PanTheOrganizer I just ordered my V2 earlier today. I read shipping takes 5-7 business days. I can't wait. I upgraded to the MTM pressure washer gun last week and it's unreal what quality products feel like and how they make your life easier. I'm a weekend warrior who enjoys detailing his stable of cars at home on the weekends. I have my jug of Adams Mega Foam ready to go.
Good stuff! :)
4th
Just arrived to the office 😁
HEHE