Found any resolutions besides the brake switch that Rovari mentioned?? Mine is doing exactly like yours but haven’t had an issue with it not starting. Just the BCI warning. Thanks for posting!
Hey, I am having the same issue myself although a little different with the number of lights showing. I also receive a BCI Malfunction warning shortly after driving maybe a km or two....no issues with starting as I have seen with others and the truck seems to drive as normal with the exception that all of the anti-lock brakes, slip, etc.. I probably have a total of 6-7 lights appearing when I get the alert. I have a new brake switch and a set of sensors from Amazon for around $70 CAD. Hoping the sensors will correct the issue. If they do, I will post an update.... Please post any updates if you find the GREMLIN! thanks! Good Luck!
Thanks for the comment. The only way I Was able to get mine to start again was to disable the rear camera sensor which disables the auto liftgate as well. Now mine is randomly throwing the bci light after about a half mile as well. Everything online says it’s a Nissan dealer item and it is part of a lemon law repair.
@@miracleandsons Update: I have replaced the brake switch and everything has gone back to normal.. over 100 miles and no problems.. I have to assume the existing switch was not 100% To test your switch you should have continuity on the top two and bottom two contacts. Once switch is depressed the contacts should have no continuity. The switch I used was from Amazon, brand was Beck Arnley…hope this helps!! Cheers
I had the same exact thing happening. I replaced both switches. Approx. 55 dollars each. Working fine now. When you reinstall the switches, leave the break pedal unpressed . Push the switches in until you can't any further. Then Twist into place. Super simple.
I have aproblem in my nissan patrol b c i malfunction
Found any resolutions besides the brake switch that Rovari mentioned?? Mine is doing exactly like yours but haven’t had an issue with it not starting. Just the BCI warning. Thanks for posting!
Hey, I am having the same issue myself although a little different with the number of lights showing. I also receive a BCI Malfunction warning shortly after driving maybe a km or two....no issues with starting as I have seen with others and the truck seems to drive as normal with the exception that all of the anti-lock brakes, slip, etc.. I probably have a total of 6-7 lights appearing when I get the alert. I have a new brake switch and a set of sensors from Amazon for around $70 CAD. Hoping the sensors will correct the issue. If they do, I will post an update.... Please post any updates if you find the GREMLIN! thanks! Good Luck!
Thanks for the comment. The only way I Was able to get mine to start again was to disable the rear camera sensor which disables the auto liftgate as well. Now mine is randomly throwing the bci light after about a half mile as well. Everything online says it’s a Nissan dealer item and it is part of a lemon law repair.
@@miracleandsons Update: I have replaced the brake switch and everything has gone back to normal.. over 100 miles and no problems.. I have to assume the existing switch was not 100%
To test your switch you should have continuity on the top two and bottom two contacts. Once switch is depressed the contacts should have no continuity. The switch I used was from Amazon, brand was Beck Arnley…hope this helps!! Cheers
I had the same exact thing happening. I replaced both switches. Approx. 55 dollars each. Working fine now. When you reinstall the switches, leave the break pedal unpressed . Push the switches in until you can't any further. Then Twist into place. Super simple.
Can I get the Amazon link to this switch we are talking about here. Have the same alarm showing up for about 2 weeks now.
Thanks
I changed the battery's in my key fod
Wait, this fixed it?