Small correction: the incident with the British Operator (he went public last year, Christian Craighead) was the hotel attack in 2019 and NOT the shopping mall. The shopping mall attack happened in 2013.
Although by strange coincidence there was an private security contractor (who'd previous been UKSF) in Nairobi when the mall was attacked. He went into the mall armed only with a handgun to rescue people and was award a George Cross for his efforts.
The high proportion of left handed operators in the special forces is due to the fact that we, the left handed, are preparing a worldwide coup against the tyranny of the right handed. They will have to use awkward weapons, corkscrews, writing and tin snips.
@Shutbyotch As a left handed from continental Europe, I can tell you that driving in Britain is just as sh*t to us as it is to any righthanded person used to driving on the right side of the rodad.
@Shutbyotch we started it. The world’s first traffic sign was on London Bridge instructing traffic to keep left. Keep left because when two gentleman pass on horseback, they are able to shake hands…
I used a rifle with that charging handle for 5 years and I can't say that I ever had an issue with it really snagging on anything. The one time I can think of it snagging was when I had my sling attached to the castle nut plate, then the handle would occasionally catch on the sling when I went to rack the rifle. I also didn't have any issues with it jabbing my chest whether I was wearing my vest and armour or just wearing a shirt. But I guess everyone's experiences are different.
Everyone's different on that one, man. I immediately changed out mine for a old style standard cocking handle as did a lot of my platoon mates, but lots of guys left it too.
Yeah, I had my charging handle changed out during my second tour, and deleted the ambi mag release. One loud click of the charging handle catching on my chest rig during a night recce patrol was enough for me to not repeat that possibility again.
Honestly I had a preference for this style of charging handle. It made racking the bolt with the left hand for stoppages and mag changes a bit easier, plus having a hook to hang the rifle off my chest rig while rucking.
@@0neDoomedSpaceMarine Only real complaint I have heard or think of is it is very front heavy because of the thick profile barrel. I’m issued the V2, which has a shorter rail length, but is overall the same rifle.
The part about the sling ring rattling reminds me some stuff I read about the MACVSOG guys who were running the incursions into Laos and Cambodia, where by one account the first thing every guy had to do when joining their unit was to ditch everything metallic in their standard issue kit or duct tape it securely to eliminate any rattle, which was a big problem for guys who were supposed to be moving quickly and silently in enemy territory during raids. Sling mounts and so on were completely replaced by tape. I guess not many lessons were learned since then when it comes to issuing rattling kit if units are still having the exact same issues.
"So you're telling me that we could have a sling mounting system that's silent, has less weight, is easy to fix in the field AND costs next to nothing? Sir, we are the military, we have a budget to spend and you can be damn sure we will! Now get me HK on the line, those hooks for 50$ a piece sound like a bargain!"
@@Kremit_the_Forg "Yes, but it will require every soldier to dedicate one pouch in his webbing to hold a roll of gaffer tape. Also, gaffer tape rolls need to be continually re-acquired, a permanent sling swivel goes through exactly one acquisition." "Aren't you just going to gaffer tape the sling swivels anyway?" "Not at government expense we are not, no sir."
Vietnamese Soldiers said they tracked US Soldiers by the smell of Cigarette Smoke and the trail of Cigarette butts they left behind. I hope those Special Units were self aware enough that they and their gear didn’t smell like ashtrays.
Not only SF did that. British SAS have done that in Malaya Borneo and up to date, passing on lessons to the USSF via the jungle school with British, Australian, New Zealand and even Rhodesian Instructors with jungle combat experience. My uncle was a Regular soldier in the UK and before i joined he taught me a lot of the tricks and techniques. It was fascinating learning all the small details, and he always said meticulous attention to detail will keep you alive longer ,"slapdash means dead" Those MACV SOG guys get my salute any day, that so many paid the ultimate price saddens me
Rule #1, let the end users test them and listen to their feedback. A great example in my time was there heavyweight BDU uniform with the giant collar. Virtually everyone hated them, and in the field we used old Vietnam era camo uniforms. I was in the 82nd Airborne at the time and we could wear them in the field but not in garrison. When I went to Special Forces I still had a few of the heavyweight BDUs and once wore a set in a HALO jump. That damn collar beat me to death on the way down.
@@Followme556 OG107s, I loved those things. When someone up the food chain finally realized that BDUs sucked they allowed the wear of OG107s and made them available in clothing sales for something like $3.50 each for pants or tops. I bought a few to wear, I should have bought them by the metric ton.
It's funny how the people who will be actually using the weapons are the last to be asked for their opinion, and usually when it's too late to change anything.
@@joejoseph7198 Because the MoD has a 60-odd page document to spec out equipment like this written by civil servants who's combat experience is limited to office stationary warfare.
We had guys test driving GMVs here in the 82nd, they reported their thoughts on it like what's good, what isn't, etc. Fast forward a year and half and we get them and they're the same. Great to drive. But mechanically they're pieces of shit.
The coating on the barrel may be part of the waterproofing process. These weapons all come ready for maritime ops and diving. This was one of the improvements from A1 to A2.
@@destroyerarmor2846 Every weapon known to man jams in the Sahara, some more than others but they will all jam. Including spears and bows, don't know how that works but there it is.
“It’s not uncommon to find them missing. [brief reflection] Well, to not find them”. Nice pedantic self correction. I really enjoyed that little demonstration of Ian’s desire for verbal precision.
I actually did a tiny bit of training with one of these last year. Spent the day with a couple of SBS dudes and they taught us the basics of their first aid (different from the rest of the military) and we had some time left over near the end of the day so they took us to their indoor range, turned the lights off and we did room clearing with NVGs. A great day.
Doesn't seem like they did. Procurement probably looked at the L119A1 program, saw how much of that was COTS parts, and figured they could do it on the cheap. Then the SF guys got burned.
@@Double_Vision So which nation's military gives their troops all the best, totally sorted equipment from the outset? None. The US spent millions on finding a 'Universal' camo for their uniforms, and came up with UCP. After years of complaints from troops in the field, and million of dollars more spent testing, it was replaced by the pattern codenamed 'Scorpion', which they had commissioned from Crye several years before, but had then ignored. Crye had already improved the design and called it Multicam, which the army wanted... but they were forced to use the older 'Scorpion' pattern, because they already had the rights to it. There are thousands of such examples from forces around the world... because no country has unlimited financial resources.
@@Double_Vision So which nation's military gives their troops all the best, totally sorted equipment from the outset? None. The US spent millions on finding a 'Universal' camo for their uniforms, and came up with UCP. After years of complaints from troops in the field, and million of dollars more spent testing, it was replaced by the pattern codenamed 'Scorpion', which they had commissioned from Crye several years before, but had then ignored. Crye had already improved the design and called it Multicam, which the army wanted... but they were forced to use the older 'Scorpion' pattern, because they already had the rights to it. There are thousands of such examples from forces around the world... because no country has unlimited financial resources.
The ambi mag catches could also be a training /creature comfort thing as anyone who starts out on an L85 will be used to 'beer canning' the mags out with their left hand and using the thumb on the release on the left and keeping a stronger firing hand grip rather than using the trigger finger on the right side button. I put one on my replica QBZ97 because I preferred the familiarity in the manual of arms and because the original button is a tiny god awful stiff affair that's nigh on impossible to operate comfortably.
Damn wish us Americans could get qzb97 bullpup. And as an American iv never seen a charging handle like that. Lol. Thank goodness for raidian raptor charging handles
This is the sort of thoughtfulness that the Australian Army receives when thier gear is being decided on. Its insane how goodd the standard soliders gear is. Better than most spec ops.
Their standard gear is so good we Kiwis couldn’t afford to buy their new AUSTEYR, to replace the old IR AUSTEYR we had for decades. So we bought the MARS-L, an M4 clone made by LMT. We had quality issues straight away. Apparently LMT had never made as many rifles in one go. Lolx
I'm guessing the higher percentage of left handers in the British Special Forces was due to them preferring to put themselves through harsh training than suffer shooting right-handed with the L85. I know I would consider it if I was British or I would have enlisted in the Canadian Army like Matsimus.
There are also multiple studies that suggest left handers are more prone to having a psychological profile that is better suited for high stress situations, along with having more moral flexibility. Basically 2 of the things you really want in your special forces. That said, tbh this rifle is still really right handed only, it lacks the ability to alter the ejection. You can use it left handed, but you have to accept there may be occasions were you'll get a face full of hot brass. Still beats the L85 for left handed use, but only just, it's a tradeoff. Easier use, far worse maintenance. Don't be surprised when you see British special forces "liberating" local arms because they keep getting given junk to work with.
@@cgi2002 on the ejector port you will see a triangular bump, thats a case deflector thats purposly designed to redirect any brass away from your face when firing left handed. Its been standard on ar designs for a very long time. Think the m16a2 was the first model that added this.
@@Gruvy that's why I said occasions rather than constantly. Usually it will be in very specific circumstances such as tight quarters CQB and/or when firing using non-standard firing stances were the rifle is pulled further back than normal. Situations basically only special forces soldiers will find themselves in. Essentially times were you have the rifle further back your not clear of the ejection port itself or were there is a wall for the cases to deflect back off towards you.
@@andro7862 possibly. Frankly you can create a study to prove nearly anything with psyche profiles for large enough groups so I take them all with a grain of salt. But speaking from personal experience i do find left handed people (myself included) to have more flexibility in how we view certain situations, but my judgement there may be biased as I am from my own experience, more morally flexible than most people I've met, I tend to have more grey area than black and white and in most situations just don't care one way or the other as its "not my problem" usually.
I've used the Colt US monolithic upper, I really liked it. It held zero fairly well, my only issue was that it was heavy and a little on the chunky side. Oh and as long as you're slung, those sling rings don't rattle that much.
When your trying to pretend your not actually there, not much is too much. I'm honestly surprised most guys haven't had them cut off within 30 seconds of seeing them.
These have a lot in common with the current Dutch service rifles(Colt C7/C8 NLD). The dutch rifles have handguard plates with intergraded heat shields that can be taken off to clean the outside of the barrel. And they kept the dogleg gastube and bigger vents for better heat dispersion. you should really take a look at them if you can!
@@0neDoomedSpaceMarine Now that I think about it I almost forgot to think logically and realized that folding stocks are horribly wobbly nevermind this conversation didn’t happen
The Dutch rifles were Colt Canada's first iteration of this monolithic upper. The Dutch kept the original barrel as well, which meant they needed to have access to the original type of barrel nut. I don't know how the later (Danish and UK) barrel nuts differ from this.
Sort of what happened to the Pathfinders in the 1990s. They were using M16A2s that had been handed down through contacts in the SAS. However as the unit was not officially scaled for them they had no real maintenance support. Once they got worn out TBTB decided not to continue with them and the unit went back to SA80 force few years, and this is what they took on the early Telics. It was only later that they started getting L119s.
to be fair the latest L85s are really good now. The A3 upgrade really has made the rifle a joy to shoot (unless you're left-handed, then good-luck). If only they had been this good when they first came out, the A1 was dreadful and completely destroyed it's reputation. Still, for Special Forces you'd be better off with a lighter weapon and one that has more flexibility.
There has at least been a some trial usage of a replacement/upgrade for these with an MLOK rail. I have only ever seen one though, I believe it is based on the Colt Canada MRR. It was also missing the grenade launcher support lug, so they have obviously decidede they are never using the thing.
Looks like a Proctor sling, instead of an improvised paracord sling attachment. You can see the other side pretty well where it attaches to the CTR stock. It's got the sliding tube to tighten up on the paracord and keep it in place.
The reason improvements sometimes end up as compromises is that the people involved will undoubtedly have their own idea of what suits best, for them. Another great bit of knowledge from Ian, thank you.
Feel like it may just be a general heat reduction coating. That suppressor and the muzzle device are going to get significantly warmer than the barrel with high volumes of fire so I am doubtful of the usefulness against IR.
Could it be as simple as just really aggressive anti glare matte coating to prevent reflections of the smooth barrel surface? Like a really minor thing compared to the whole rifle, but kinda like a thing one would think manufacturer might be able to sell to buyer. "oh and this special ops special version comes with our super new uber black anti glare coating on the barrel so the guys don't get caught by a random reflection". Again utterly useless compared to "ehh it's a metal thing with lot of smooth and round surfaces", but again something Colt Canada might have sold the MOD on for it being a "special rifle with the best tech".
A small update for those wanting it: Popo Medic here on YT has done a great video on said attack. 5 terrorists went in, 1 blew himself up to cause chaos while the remaining 4 did their cruel work via AKs and grenades. The Operator is Christian Craighead, 22nd Regiment of the SAS, the video has a wonderfully clear picture of his kit and weapon. He'd gotten a call from a unknown friend and he just genuinely went rogue to do his job, saved a unknown number of civvies while carrying wounded ones and escorting the rest. He'd provided help and leadership with armed civvies, off-duty police and some private security before actual military support arrived but he broke off from them when he heard rifle fire somewhat close by, he'd end up killing 2 of the terrorist himself and providing more support and guidance as well as more security for fleeing civvies. The man retired from the SAS in 2020, a his book on the attack is pending release. Respect to this hero.
I love the magpul ASAP plate. It doesn't make noise when it actually has a sling attached. Not that it matters. If a tiny rattle gives your position away you have worse problems. Heavy breathing, footsteps, stepping on garbage, gear rattling are more of a "problem" if you're sneaking around playing metal gear solid.
They shoulda left the gas block on the outside so it could use standard gasblocks/tubes. Maybe this would have let them use a standard dogleg tube that sits closer to the barrel before rising to enter the receiver. I'll have to watch again to see if this would have been enough to enable such a switch. The urge to cut off that grenade launcher support must be yooj.
@@ArcturusOTE Not at all. Until the 1950s the system was Mark 1, Number 1, then Mk .1, No.2 etc. It then changed to L1A1, L1A2 etc. What I was getting at is that there is no 'Mark 1' or 'Mark 2' L119A1, or L1A1 for that matter. Two different systems :)
The handguard on those uppers are actually pretty sweet. I've personally never seen pic rail handguards were the sides are scalloped like that. It would be a great way to reduce weight without using MLOK handguards, which I personally am not the biggest fan of. It also looks like you would be able to get a better grip on the gun since the scalloped out area is so thin.
@@MuhammadAli-qh8tg urgi would like to have a word with you. It's pros and cons to it all like anything. I'm a quad rail guy but like mlok stuff too. If you just need a LAM and flash light not really all that neccessary to have all that pic rail. Other than obviously it being more rugged and durable.
why would a flat surface, that you cant attach anything to, be better than a surface with some holes that you can actually attach things to? unless you are running a 6" handguard, there is no need for a quad rail
Ambi mag release is also nice for right-handed folk using their thumb. Surprised no one made an effort to update the charging handle. SO many good options for years now.
Theres alway been some question of legality of Colt Canada parts in the US because of the way Colt started bringing in things. I think some Colt Canada guns went to LE but Colt seemed to have forgot about 922r compliance and then never seemed to have a clear plan on Colt Canada products coming into the US.
For my first deployment I was issued a rebarreld GAU-5 and that barrel was shot out too. The the parkerizing had been warn off on every touch point and the places it remained it was so thin you could see through it. Every spring including the hand guard was mushy, and I’m sure that just about every surface was out of spec in some way. My second deployment was with an M4. It was more dependable but by then it had a decade of hard use behind it and it wasn’t exactly trustworthy either. So I was horrified when the SCAR 16 didn’t get picked up because I was firmly in the “ARs are junk!” camp. Now I’m a little older and a little wiser, but can’t help but but wonder if some of the ongoing “reliability concerns” about the AR family of rifles stem from work guns that are kept way beyond their service life.
@@jackjmaheriii 249s are pretty good, the US military takes really bad care of them, like no repairs/part replacements in over 10 years bad care. If anything, the fact that they still are decent despite how terrible US care for them is compared to other rifles shows that they are very good rifles.
We Brits seem to be doing a lot of business with Colt Canada as the Royal Marines are now all being equipped with the Colt C8, so far 42 and 43 Commando are fully equipped with the C8 with 40 and 45 to follow.
I believe colt and colt Canada pay royalty payments to LMT for the monolithic upper reciever. Colts lawyers did not do proper patent check before making it. When it first came out.
LMT’s quick change barrel system predated the Colt IUR. I presume Colt didn’t go with it because they wanted to offer the upper receiver as an upgraded upper for existing M16/C7 users. Which did happen with the Dutch and Danish C7s and C8s.
You'd think with all the really nice ambi-charging handles out these days, you'd have one that's actually an improvement...I wonder why they stuck with that one?
I was in the Canadian infantry reserves I used the c7, the longer charging handle is in my opinion better then the typical m4 charging handle. You can rack it faster and more efficiently, and I have never had it snag rucking, or in the field.
I have several of the newer SAS barrels and the coating could be vest described as being similar to the rubbery coatings put on truck beds. They are designed to prevent corrosion, considering the difficulty in cleaning the barrel under the monolithic handguard. Pretty neat texture.
I've got a few buddies on the teams, most common load out as per his unit, was a short barreled m4 with a suppressor and a glock in 9mm. Granted, it's been close to a decade since we talked about that stuff, so I'm sure things have changed at least a little bit.
In the past 20 years or so, it seems to be common for "inspiraton" to come from the private sector instead of the past gov-to-civ transfer of ideas, at least with fighting rifles and precision guns.
@@mattfleming86 no, that's the way it has always been. The Kentucky rifles that American revolutionaries were using definitely outclassed the production war muskets.
All L119A2 are ambidextrous That was part of the brief The sling on the Nairobi rifle is a Frank Proctor sling. Paracord is in the design You've the wrong charging handle on the A1
I was in SFSG and we used the A1s, the tier 1 guys (Hereford/Poole) had these and I can’t remember the reasons why but I do remember alot of them preferring the A1? As I say I can’t remember why exactly but my best memory of it was some of the SFCs attached to our unit got issued these as they were considered tier 1 (up for debate, don’t shoot the messenger lol) and I do remember both of the dudes I worked with said they preferred the A1 for some reason, I think it was a durability issue or something because they both had to take their rifles to the armorer numerous times, I just remember thinking these looked sick because of the monolithic rail and desert coloured grip and butt lol
@@nickjohnson710 I didn’t sadly! They were in the armoury when I got to SFSG from 3 Para and they were used as a section/team sharpshooter rifle or DMR, I only did a short stint in a rifle company then went to snipers where they used the HK417 as they semi-auto 7.62 rifle as it’s considered better for a sniper role, so I missed out on ever firing a G3! Another thing that was annoying was seeing MP5s in the armoury but never getting the chance to fire one as they had been phased out by the time I got to the unit.
@@nickjohnson710 yeah I absolutely loved it! I did more in 3 years there than I did in nearly 6 years at 3 Para lol I only got out because of family stuff really, if I was single with no kids I’d still be there. And as for other units I can’t say too much. The two obvious ones quite a lot, and US 75th Ranger regiment a fair amount as well as they were seen as our US equivalent. Any others would be unprofessional to say due to opsec.
Only reason I can see is because colt Canada already had them around for their C7/C8 rifles. And that charging handle is not just for ambi use, that giant lever is also meant to be easier to operate with thick winter gloves, because Canadian winters are cold.
I'd love to see a video on the history of "handedness" in firearms. I assume at one point (like with so many things) everyone shot right-handed because that was the only "proper" way that one should shoot. This gun shows nods to the ambidextrous user, and truly ambidextrous firearms have been out there for a while now but never seem to become the norm. I'm left hand dominant but do some things righty and some ambi-, I started shooting lefty until I discovered that I'm very right eye dominant. So switching to righty was easy and meant I don't have to worry about controls as much.
The British seem to really enjoy their time-honored tradition of fielding their troops with quirky rifles. It has to take a lot of effort to get a mass produced M16 variant wrong in 2019.
Thats pretty much the Danish M10/C8IUR. i'm pretty sure we use standard triggers on our guns... we have the same stock, ambi mag release and ambi charging handle. i have had one issued for over 4 years now and i must say that the gun gets hot in situations like CQB or suppressive fire but it's not that bad ( it's nice in the winter). i have on the other hand never had any issue with cleaning the gun nor maintaining it in daily service and deployment.
I'm surprised at the upper when you said that it was an MRP licensed from LMT. The real MRP since it was released ~15+ years ago has used a method of securing the barrel that uses two screws that are easily accessible from the outside of the upper. This was one of the selling points of the system; you could change barrel length and caliber in minutes. Is this a special military specific design? The reason for my question is that I've owned two of the railed MRPs and neither of them looked anything like this.
@@Antigonus. so thats why no one else makes them anymore, thank you for explaining that. It seems like thats created a misperception with the public that they are inherently unpopular because the designs have been discontinued.
How and WHY do they keep going for the most horrible rear sling mounts lol? The C7A2 we use in Canada had a small recap that introduced a smaller ambi charging handle that doesn't require the locking clasp to be pressed, and a QD ambi sling mount. I find this all very odd...
Like a proper modern British rifle Ian takes some time to describe all the random parts that will fall off it Yes it's actually Canadian, but they were making it to requested specs and probably sent a very sincere letter when they heard about it so I'm letting them off the hook.
I love the story about the 1 sas operator taking matter into his own hands. You can guarantee he was making a cup of tea before deciding “watch my tea, ill be back” legend has it, he got back to his tea BEFORE the water was even boiled (jokes of course)
@@skyblue1954i feel like only the SAS would have operators that would go into a situation like this without backup. i may be bias because I believe the SAS are the best special forces unit in the world. Not saying other SF units arent great, of course they are. I just feel the British SAS are a cut above the rest
I would like to add a correction. He didn’t wrap the Paracord to make a sling point. Because he’s not even using it. He’s using the same set up I always used. Hook a carabiner to a loop on your vest/plate carrier to whatever side of the chest the buttstock goes on. Depending on whether you’re left or right handed. Then on the end of your buttstock, where your sling goes, use any type of Paracord set up you want. In the US Army Infantry we just called at 550 cord. I used a 550 cord bracelet that was on the end of my buttstock. Then, clip it up to the carabiner & let it hang from my chest. No sling in the way, nothing like that. And it’s in the perfect position, depending on where you put the carabiner, to raise your rifle up on target. And in the pictures, it looks like Christian Craighead is using it the same way. Looks like he has some Paracord looped around the butt stock and clipped to the carabiner.
This rifle was used by a member of the sas that was embedded with the Kenyan special forces when al shabab attacked a business and shopping complex in 2019
My first thought when Ian pointed out that monolithic upper was that getting to the barrel and gas system has to be a pain. Pity the engineers didn't get a little input from the users.
You got a small amount of guys that use it and it's important that all their attachments stay zeroed to land shots with their laser/IR combos. So I wouldn't care much either if an armourer needs a long tool to take it apart or clean it in case someone dropped it in between the chicks in the 24/7 mud wrestling pit. There aren't a lot of options to quickly fix that issue and those uppers were already on the market.
I think someone (maybe LMT themselves or DD or someone) makes a version where the bottom rail is removable to be able to use M203s that attach in the standard fashion and not to the rail like the british chose (for some weird reason).
@@МихаилЛевченко-с3б Why would you want to hang that anchor off your barrel if you can keep it free floating by hanging it off the bottom rail? That is the whole point of it.
I owned a 10" upper for several years, I actually preferred the barrel replacement on these to a regular AR. As long as you HAVE access to the barrel tool it's a breeze. The heat shields are definitely finicky as hell. I have to disagree about the heat buildup on these... I've got video of me blasting it on my channel, and I was lucky enough to get mine onto a select-fire lower receiver several times for testing (no video). Never got any hotter than other AR platforms. I did not shoot mine suppressed, the extra gas buildup from this might be to blame for the extra heat you're referencing. I now have a Colt Canada MRR upper, the next generation of this upper receiver setup. It's basically the same thing, but with M-LOK.
Ian I love to see you do a video on the Dutch version of this rifle. Because we had our new versions of the colt canada c7 c8 and for the Dutch marines laow (lsw) and they already fixed the heating problems. Thing is we already had those guns in (i want to say) 2012-2013 if memory is correct.
As far as I know the KCT transfered over to the HK416A5 in 2010, and recent pictures of NLMARSOF do show HK416's as well. They did use C8A1GD before, and I am not sure when the transferred to the HK416 (or if that is even public knowledge). Regardless, the C8 was in service already before 2010. I do know there was a modernization of existing C7 and C8 rifles in 2009, called the C7/8NLD, which might be the version you are referring to. These are the versions with the relatively iconic hand-guards and stock in tan coloring. I am not sure when the colt LOAW was introduced either, might have been at the same time as the modernization of existing C8/C7 weapons.
SF would probably want heavier barrels, use collapsible stocks, super tough rigid rails (like this one) that hold zero of IR lasers. Its a pretty good seeming rifle. Would take one over a wwsd2020
@@tristanhodgden4286 Yeah, the WWSD is a fine civie/leo rifle, but a bit lacking for mil/sof. Though, the lancer handgaurd would probably make a nice, still semi light substitute, along with faxon's 'gunner' profile barrel, which is only 3 oz more and adds a decent bit of meat.
Regards the cocking handle. I'm sure some in service rifles have been pictured with Giessele airborne charging handles. Also, the Aimpoint T2 seems to be the standard CQB optic for A2s and is seen in more images than the Sig R4T and 'Christian Craighead' was using a Frank Proctor sling in Nairobi, rather than a self made paracord mod but a variety of slings have been seen in use on UKSF rifles.
You referenced the paracord holding the front sling point for lack of a solution but it appears that the other end of the sling is also paracord-ed...right OVER the QD mount point @ 12:46
I love how Ian implies the British Gov’t would be annoyed to find out that we can effectively get our hands on an exact copy of there SF rifle. I wonder if they would be even more annoyed to learn that most people wouldn’t choose this option over other ar-15 variants even if it flooded the market. That’s fun thing to think about, does it annoy them more that we can get it or that most people wouldn’t even buy it given the option? Not that it’s not good, just that you can get way more for your money on the American civilian market.
It was basically “how can we make an ambi charging handle, but without changing the basic body of the standard charging handle?” Other than milling off that massive protrusion on the left, I’m not sure how you’d be able to do much better.
Ian - if you’d like to do a review of this rifles big brother (in .308, from LMT) I’d be happy to lend mine. I’m in Phoenix and take my kids to the air museum in Tucson every few months, so I can either ship or drop off. I don’t have an FFL so we’ll have minor complications, but that’s easy enough to overcome.
@1:50 and is now CZ I remember some of these uppers went up for sale here in Canada in 2018? I was tempted and regretted not getting one because of price until May 2020.
You might want to do something at some time about what being "left handed" actually means. That is generally thought of as being monolithic, you are right handed or left handed, and people are defined "Lefty" that way. In fact there are many more complications. I'm very much right handed, I write and throw with my right arm, but I bat left, shoot golf left, and shoot hockey left. Most people will bat right, almost everyone golf's right, yet the vast majority of those people will shoot in hockey left, and that requires changing their hand position on the stick from the way they golf or bat a ball. My hand order never changes and my right thumb touches the bottom of my left hand (or could in the wider grip for hockey). I'm also right eyed. I'm a photographer and like to watch other people pick up cameras. They will just put the camera's viewfinder to one specific eye without thinking, and that defines whether they are left eyed or not. It's almost impossible to change, and that's too bad, because 35mm style cameras are designed for right eyed shooters. In any case your comment about finding more left handed shooters in that Brit special forces group, may turn out to be more "left eyed" shooters. I don't think that there's been much if any research done on this subject at all and I'm sort of surprised that it doesn't come up more often. From where I sit it looks like all of this "left" and "right" business is completely independent from each other, so the "left brain" "right brain" theories seem to hold very little water.
He shoots right despite being a lefty all the time, and points out that ambi guns are useful for switching up shooting left or right on the fly. The majority of people are still going to go "I'm a righty i shoot right" though.
@@realityshotgun the PDQ ambi bolt catch on the WWSD carbines actually makes the gun more right hander friendly :) I shoot with a sling a lot, no more twisting the rifle over to slap the release. I also like ambi safeties for quickly putting the rifle back on safe. It wasn’t difficult with just one, but it’s a little more convenient with two.
Really like the videos. One improvement I'd suggest is if you could slow down the camera a bit when you run it the lenght of the gun. The details might come through a little better.
So.... The new special forces rifle still has a bunch of features the special forces dont actually want, and a bunch of features the manufacturer cant even sell to them. They learned a great deal from the L85.
The heat issue would have easily been solved had Colt wanted to copy the monolithic uppers that had mlok in them, more open to allow air to pass through easier and could have had the option to run G10 railscales allowing for both better grip and heat shielding.
@@kfeltenberger yeah, and they can still have the rails. Hybrid rails utilizing both mlok and 1913 have been a thing for a good long while, and there are dead zones in the rail being shown easily capable of being slotted into a mill and have mlok slots cut, that's why at my shop I offer the service for these no longer produced LMT uppers to cut said mlok slots into them.
Small correction: the incident with the British Operator (he went public last year, Christian Craighead) was the hotel attack in 2019 and NOT the shopping mall. The shopping mall attack happened in 2013.
I was just thinking was the shopping mall incident really so recently, but accepted it with just a "time flies, eh?" shrug. Thanks!
Although by strange coincidence there was an private security contractor (who'd previous been UKSF) in Nairobi when the mall was attacked. He went into the mall armed only with a handgun to rescue people and was award a George Cross for his efforts.
I wonder if he likes the newer 007 movies.
@@SamI-bv9kd damn that's so cool, all we have in America is this lame David Cross
Kenya believe it?
The high proportion of left handed operators in the special forces is due to the fact that we, the left handed, are preparing a worldwide coup against the tyranny of the right handed. They will have to use awkward weapons, corkscrews, writing and tin snips.
Don't forget swapping the gas and break pedals
@Shutbyotch As a left handed from continental Europe, I can tell you that driving in Britain is just as sh*t to us as it is to any righthanded person used to driving on the right side of the rodad.
@Shutbyotch we started it. The world’s first traffic sign was on London Bridge instructing traffic to keep left.
Keep left because when two gentleman pass on horseback, they are able to shake hands…
Reclaiming the use of scissors!
your comments really makes my day....thanks lefthanded-mate!
I used a rifle with that charging handle for 5 years and I can't say that I ever had an issue with it really snagging on anything. The one time I can think of it snagging was when I had my sling attached to the castle nut plate, then the handle would occasionally catch on the sling when I went to rack the rifle. I also didn't have any issues with it jabbing my chest whether I was wearing my vest and armour or just wearing a shirt. But I guess everyone's experiences are different.
Everyone's different on that one, man. I immediately changed out mine for a old style standard cocking handle as did a lot of my platoon mates, but lots of guys left it too.
Yeah, I had my charging handle changed out during my second tour, and deleted the ambi mag release. One loud click of the charging handle catching on my chest rig during a night recce patrol was enough for me to not repeat that possibility again.
Honestly I had a preference for this style of charging handle. It made racking the bolt with the left hand for stoppages and mag changes a bit easier, plus having a hook to hang the rifle off my chest rig while rucking.
@@samholdsworth420 please provide evidence that people are lying rather than discussing their experiences lmao
Q: how long does it take for people to start arguing about a comment in a youtube comments section?
A: approximately three minutes
FYI this 15.7” version is the standard issue rifle in the Danish Army, but with nomenclature M/10 C8IUR Version 4.
Thats kinda funny, I wonder if the armorers in the Baltics feel a bit smug having the actual LMT's
I worked with Danes and Dutch soldiers all using Canadian-made rifles. Makes one proud.
15.7", probably meant to be 40cm that why it looks weird in inches.
@@0neDoomedSpaceMarine Only real complaint I have heard or think of is it is very front heavy because of the thick profile barrel. I’m issued the V2, which has a shorter rail length, but is overall the same rifle.
We have also had Magpul furniture for them for years. In the future we are getting Mission First Tactical and Ergo parts to accessorize them with.
The part about the sling ring rattling reminds me some stuff I read about the MACVSOG guys who were running the incursions into Laos and Cambodia, where by one account the first thing every guy had to do when joining their unit was to ditch everything metallic in their standard issue kit or duct tape it securely to eliminate any rattle, which was a big problem for guys who were supposed to be moving quickly and silently in enemy territory during raids. Sling mounts and so on were completely replaced by tape. I guess not many lessons were learned since then when it comes to issuing rattling kit if units are still having the exact same issues.
"So you're telling me that we could have a sling mounting system that's silent, has less weight, is easy to fix in the field AND costs next to nothing?
Sir, we are the military, we have a budget to spend and you can be damn sure we will! Now get me HK on the line, those hooks for 50$ a piece sound like a bargain!"
@@Kremit_the_Forg "Yes, but it will require every soldier to dedicate one pouch in his webbing to hold a roll of gaffer tape. Also, gaffer tape rolls need to be continually re-acquired, a permanent sling swivel goes through exactly one acquisition."
"Aren't you just going to gaffer tape the sling swivels anyway?"
"Not at government expense we are not, no sir."
@@M80Ball lmao
Vietnamese Soldiers said they tracked US Soldiers by the smell of Cigarette Smoke and the trail of Cigarette butts they left behind. I hope those Special Units were self aware enough that they and their gear didn’t smell like ashtrays.
Not only SF did that. British SAS have done that in Malaya Borneo and up to date, passing on lessons to the USSF via the jungle school with British, Australian, New Zealand and even Rhodesian Instructors with jungle combat experience. My uncle was a Regular soldier in the UK and before i joined he taught me a lot of the tricks and techniques. It was fascinating learning all the small details, and he always said meticulous attention to detail will keep you alive longer ,"slapdash means dead" Those MACV SOG guys get my salute any day, that so many paid the ultimate price saddens me
Rule #1, let the end users test them and listen to their feedback. A great example in my time was there heavyweight BDU uniform with the giant collar. Virtually everyone hated them, and in the field we used old Vietnam era camo uniforms. I was in the 82nd Airborne at the time and we could wear them in the field but not in garrison. When I went to Special Forces I still had a few of the heavyweight BDUs and once wore a set in a HALO jump. That damn collar beat me to death on the way down.
Which group?
@@rogainegaming6924 5th Group.
I can picture a cartoon illustration of the whamobird collars slapping your face during that HALO jump.
@@Followme556 OG107s, I loved those things. When someone up the food chain finally realized that BDUs sucked they allowed the wear of OG107s and made them available in clothing sales for something like $3.50 each for pants or tops. I bought a few to wear, I should have bought them by the metric ton.
@@RobinP556 I know a few 5th group guys IRL. Great people. You ever run into a guy named Lavelle? Was an officer and a medic.
I feel like giving prototypes to actual soldiers in the field before mass producing would have eliminated basically every problem this thing has.
It's funny how the people who will be actually using the weapons are the last to be asked for their opinion, and usually when it's too late to change anything.
Why is it always the Britons with this problem?
@@joejoseph7198 Because the MoD has a 60-odd page document to spec out equipment like this written by civil servants who's combat experience is limited to office stationary warfare.
@@jm40004 I guess their current active experience is skirmishes to the copier.
We had guys test driving GMVs here in the 82nd, they reported their thoughts on it like what's good, what isn't, etc. Fast forward a year and half and we get them and they're the same.
Great to drive. But mechanically they're pieces of shit.
The coating on the barrel may be part of the waterproofing process. These weapons all come ready for maritime ops and diving. This was one of the improvements from A1 to A2.
@@destroyerarmor2846 Every weapon known to man jams in the Sahara, some more than others but they will all jam.
Including spears and bows, don't know how that works but there it is.
@@TheArchaos can confirm 100%
@@destroyerarmor2846 My AK jammed in sand due of the open port. Nonetheless every weapon will jam or fail at one point.
@@joshuajoaquin5099 I have been known to break any weapon.
“It’s not uncommon to find them missing. [brief reflection] Well, to not find them”. Nice pedantic self correction. I really enjoyed that little demonstration of Ian’s desire for verbal precision.
I actually did a tiny bit of training with one of these last year. Spent the day with a couple of SBS dudes and they taught us the basics of their first aid (different from the rest of the military) and we had some time left over near the end of the day so they took us to their indoor range, turned the lights off and we did room clearing with NVGs. A great day.
@@markearl7172 🎣💩
@@markearl7172 🧚♂️
@@markearl7172
❄️
@@markearl7172 💩👃
@@markearl7172 When was that then lmao
Now i really want to see a video on the other Colt Canada AR's C8,C7A2, IUR, MRR
This is the best rifle I've ever used, everything just felt right.
with that many workarounds people had to do in the field makes you wonder if they tested them beforehand
Doesn't seem like they did. Procurement probably looked at the L119A1 program, saw how much of that was COTS parts, and figured they could do it on the cheap. Then the SF guys got burned.
This is a weapon for the British military, so it'll all be sorted a swift 25 years from now, right in time for a newer, wonkier rifle to be adopted.
@@Double_Vision So which nation's military gives their troops all the best, totally sorted equipment from the outset? None. The US spent millions on finding a 'Universal' camo for their uniforms, and came up with UCP. After years of complaints from troops in the field, and million of dollars more spent testing, it was replaced by the pattern codenamed 'Scorpion', which they had commissioned from Crye several years before, but had then ignored. Crye had already improved the design and called it Multicam, which the army wanted... but they were forced to use the older 'Scorpion' pattern, because they already had the rights to it. There are thousands of such examples from forces around the world... because no country has unlimited financial resources.
@@Double_Vision So which nation's military gives their troops all the best, totally sorted equipment from the outset? None. The US spent millions on finding a 'Universal' camo for their uniforms, and came up with UCP. After years of complaints from troops in the field, and million of dollars more spent testing, it was replaced by the pattern codenamed 'Scorpion', which they had commissioned from Crye several years before, but had then ignored. Crye had already improved the design and called it Multicam, which the army wanted... but they were forced to use the older 'Scorpion' pattern, because they already had the rights to it. There are thousands of such examples from forces around the world... because no country has unlimited financial resources.
@@another3997 Bruh, it was just a cheeky little self depreciating joke
The ambi mag catches could also be a training /creature comfort thing as anyone who starts out on an L85 will be used to 'beer canning' the mags out with their left hand and using the thumb on the release on the left and keeping a stronger firing hand grip rather than using the trigger finger on the right side button.
I put one on my replica QBZ97 because I preferred the familiarity in the manual of arms and because the original button is a tiny god awful stiff affair that's nigh on impossible to operate comfortably.
@@zoiders Yeah it isnt as common as one would think, but it's still a nice feature to have just in case you do need that expedience
Damn wish us Americans could get qzb97 bullpup. And as an American iv never seen a charging handle like that. Lol. Thank goodness for raidian raptor charging handles
@@zoiders yes but dropping into ur hand is better than physically having to pull them out.
@@zoiders not exactly. Did 2 tours in iraq. In some of the most intense fighting of the war. I seen alot of stuff. And lost alot I'll never get back.
@@zoiders where did u serve Utube. Or tik toc
Love your videos on old guns but also really like seeing more modern, uncommon or rare military guns too!
Keep em coming brother!
This is the sort of thoughtfulness that the Australian Army receives when thier gear is being decided on. Its insane how goodd the standard soliders gear is. Better than most spec ops.
Their standard gear is so good we Kiwis couldn’t afford to buy their new AUSTEYR, to replace the old IR AUSTEYR we had for decades.
So we bought the MARS-L, an M4 clone made by LMT.
We had quality issues straight away. Apparently LMT had never made as many rifles in one go. Lolx
That Steyr is the worst looking gun on earth.
I'm guessing the higher percentage of left handers in the British Special Forces was due to them preferring to put themselves through harsh training than suffer shooting right-handed with the L85. I know I would consider it if I was British or I would have enlisted in the Canadian Army like Matsimus.
There are also multiple studies that suggest left handers are more prone to having a psychological profile that is better suited for high stress situations, along with having more moral flexibility. Basically 2 of the things you really want in your special forces.
That said, tbh this rifle is still really right handed only, it lacks the ability to alter the ejection. You can use it left handed, but you have to accept there may be occasions were you'll get a face full of hot brass. Still beats the L85 for left handed use, but only just, it's a tradeoff. Easier use, far worse maintenance. Don't be surprised when you see British special forces "liberating" local arms because they keep getting given junk to work with.
@@cgi2002 on the ejector port you will see a triangular bump, thats a case deflector thats purposly designed to redirect any brass away from your face when firing left handed. Its been standard on ar designs for a very long time. Think the m16a2 was the first model that added this.
@@Gruvy that's why I said occasions rather than constantly. Usually it will be in very specific circumstances such as tight quarters CQB and/or when firing using non-standard firing stances were the rifle is pulled further back than normal. Situations basically only special forces soldiers will find themselves in. Essentially times were you have the rifle further back your not clear of the ejection port itself or were there is a wall for the cases to deflect back off towards you.
@@cgi2002 I think the moral flexibility is somewhat of a myth.
@@andro7862 possibly. Frankly you can create a study to prove nearly anything with psyche profiles for large enough groups so I take them all with a grain of salt. But speaking from personal experience i do find left handed people (myself included) to have more flexibility in how we view certain situations, but my judgement there may be biased as I am from my own experience, more morally flexible than most people I've met, I tend to have more grey area than black and white and in most situations just don't care one way or the other as its "not my problem" usually.
I've used the Colt US monolithic upper, I really liked it. It held zero fairly well, my only issue was that it was heavy and a little on the chunky side. Oh and as long as you're slung, those sling rings don't rattle that much.
When your trying to pretend your not actually there, not much is too much. I'm honestly surprised most guys haven't had them cut off within 30 seconds of seeing them.
Usually just snipped off and replaced with a little paracord loop or similar
@@Mr1Knut parachord is the field grade answer to many design issues. It a good practice to have a few yards in your pack.
These have a lot in common with the current Dutch service rifles(Colt C7/C8 NLD). The dutch rifles have handguard plates with intergraded heat shields that can be taken off to clean the outside of the barrel. And they kept the dogleg gastube and bigger vents for better heat dispersion.
you should really take a look at them if you can!
@@0neDoomedSpaceMarine the HK piston nonsense means you can have a folding stock on it so unfortunately I’m all for HK on that one
@@0neDoomedSpaceMarine Now that I think about it I almost forgot to think logically and realized that folding stocks are horribly wobbly nevermind this conversation didn’t happen
The Dutch rifles were Colt Canada's first iteration of this monolithic upper. The Dutch kept the original barrel as well, which meant they needed to have access to the original type of barrel nut. I don't know how the later (Danish and UK) barrel nuts differ from this.
UK SOF: "Awww, I don't like this L119A2!"
Dad in front seat: "If I hear any more complaining, I will turn this car around and take us back to L85!"
You joke but at the unit I was at we actually had a CO say that very thing lol.
Stop whining or no one goes to war
Sort of what happened to the Pathfinders in the 1990s. They were using M16A2s that had been handed down through contacts in the SAS. However as the unit was not officially scaled for them they had no real maintenance support. Once they got worn out TBTB decided not to continue with them and the unit went back to SA80 force few years, and this is what they took on the early Telics. It was only later that they started getting L119s.
to be fair the latest L85s are really good now. The A3 upgrade really has made the rifle a joy to shoot (unless you're left-handed, then good-luck). If only they had been this good when they first came out, the A1 was dreadful and completely destroyed it's reputation.
Still, for Special Forces you'd be better off with a lighter weapon and one that has more flexibility.
I would still go with the L1A1, 7.62mm. Hoofing piece of kit.
There has at least been a some trial usage of a replacement/upgrade for these with an MLOK rail. I have only ever seen one though, I believe it is based on the Colt Canada MRR. It was also missing the grenade launcher support lug, so they have obviously decidede they are never using the thing.
I've also seen one with an M-Lok FDE handguard out in the wild.
Thank you, Ian .
Looks like a Proctor sling, instead of an improvised paracord sling attachment. You can see the other side pretty well where it attaches to the CTR stock. It's got the sliding tube to tighten up on the paracord and keep it in place.
It is indeed a Proctor sling.
Yes, it is a Frank Proctor sling, as confirmed by Reptile House. I’m a little surprised, as usually Ian researches better for videos.
@@kevinalmgren8332 you'll get over it
The reason improvements sometimes end up as compromises is that the people involved will undoubtedly have their own idea of what suits best, for them.
Another great bit of knowledge from Ian, thank you.
It's what we Germans call "verschlimmbessern". Basically means to make it worse by improving it.
You guys really can come up with a compound word for anything.
@@Cohac ...it's awesome, isn't it?
@@m00hk00h Damn I was hoping you were going to say you had a word for always having a word for something
What's the word for unnecessarily long words
@@realityshotgun German
Could be the mysterious rubber part could be a heat shield to hide presence silhouette on thermal sight ?
Like with the FR F2 ?
Feel like it may just be a general heat reduction coating. That suppressor and the muzzle device are going to get significantly warmer than the barrel with high volumes of fire so I am doubtful of the usefulness against IR.
@@killdizzle right. And now there's hybrid NV/IR so there's almost no way to hide from any of it these days
Or just make it comfortable when the barrel getting hot from high volume firing.
Could it be as simple as just really aggressive anti glare matte coating to prevent reflections of the smooth barrel surface?
Like a really minor thing compared to the whole rifle, but kinda like a thing one would think manufacturer might be able to sell to buyer. "oh and this special ops special version comes with our super new uber black anti glare coating on the barrel so the guys don't get caught by a random reflection". Again utterly useless compared to "ehh it's a metal thing with lot of smooth and round surfaces", but again something Colt Canada might have sold the MOD on for it being a "special rifle with the best tech".
Anything rubber on a British Army firearm is there solely for the purpose of squaddies chewing it.
The sling in the Nairobi incident was probably a Procter sling. It has paracord loops at both ends rather than standard QDs or whatever.
A lot of guys simply cut them off, likewise they cut and file the cocking handle extension, especially free fall troops.
As said on the A1 video.
A small update for those wanting it: Popo Medic here on YT has done a great video on said attack. 5 terrorists went in, 1 blew himself up to cause chaos while the remaining 4 did their cruel work via AKs and grenades. The Operator is Christian Craighead, 22nd Regiment of the SAS, the video has a wonderfully clear picture of his kit and weapon. He'd gotten a call from a unknown friend and he just genuinely went rogue to do his job, saved a unknown number of civvies while carrying wounded ones and escorting the rest. He'd provided help and leadership with armed civvies, off-duty police and some private security before actual military support arrived but he broke off from them when he heard rifle fire somewhat close by, he'd end up killing 2 of the terrorist himself and providing more support and guidance as well as more security for fleeing civvies. The man retired from the SAS in 2020, a his book on the attack is pending release. Respect to this hero.
I love the magpul ASAP plate. It doesn't make noise when it actually has a sling attached. Not that it matters. If a tiny rattle gives your position away you have worse problems. Heavy breathing, footsteps, stepping on garbage, gear rattling are more of a "problem" if you're sneaking around playing metal gear solid.
Pretty good looking ARs i must say.
Pretty boring, but that's exactly what you want in a rifle.
They look clean and straight, very nice.
I can say from experience that Colt Canada rifles are VERY high quality.
Yes that's absolutely correct, but what about your chemistry?
@@nikanor8152 lmao nice.
I carried them for 30 yrs. I was in one of the first bns in Germany to get them in 1988 and I retired in 2018.
@@nikanor8152 It’s of questionable quality.
You have one or what ?
It looks cool, therefore it can't be bad.
Laughs in Zastava sounds 🤣
They shoulda left the gas block on the outside so it could use standard gasblocks/tubes.
Maybe this would have let them use a standard dogleg tube that sits closer to the barrel before rising to enter the receiver.
I'll have to watch again to see if this would have been enough to enable such a switch.
The urge to cut off that grenade launcher support must be yooj.
Tell that to Justin Trudeau.
@@maxpulido4268 the standard gas tubes were targeted for cold weather failures for the Canadian rifles. They had to be upgraded i suppose.
The Italian philosophy.
So glad there’s more info on these modern British firearms don’t have enough forgotten weapons videos, hell just videos In general.
Such a wasted opportunity: they could've called this the L119 Mk2* in the finest traditions of the pre-WW2 British Army!
There already is an l119a1 mark 2, if they update this one it will be l119a2 mk2(or mk1 maybe?)
@@realityshotgun If anyone's using 'Mark', it's strictly unofficial. A2 etc is the only official nomenclature for new iterations of service weapons.
@@JonathanFergusonRoyalArmouries Huh, was the Mark designation on older British guns always informal?
@@ArcturusOTE Not at all. Until the 1950s the system was Mark 1, Number 1, then Mk .1, No.2 etc. It then changed to L1A1, L1A2 etc. What I was getting at is that there is no 'Mark 1' or 'Mark 2' L119A1, or L1A1 for that matter. Two different systems :)
The handguard on those uppers are actually pretty sweet. I've personally never seen pic rail handguards were the sides are scalloped like that. It would be a great way to reduce weight without using MLOK handguards, which I personally am not the biggest fan of. It also looks like you would be able to get a better grip on the gun since the scalloped out area is so thin.
Everybody hates the mlok and key mod systems... Unless they do not mount anything on them
@@MuhammadAli-qh8tg urgi would like to have a word with you. It's pros and cons to it all like anything. I'm a quad rail guy but like mlok stuff too. If you just need a LAM and flash light not really all that neccessary to have all that pic rail. Other than obviously it being more rugged and durable.
I took an old surefire quad rail and tried scalloping the sides like that years ago. it was actually a very ergonomic and took a bit of weight off.
You'd like KAC's URX 3 handguards then
why would a flat surface, that you cant attach anything to, be better than a surface with some holes that you can actually attach things to? unless you are running a 6" handguard, there is no need for a quad rail
Informative as always, I didn't know the pros/cons of monolithic upper before
Ambi mag release is also nice for right-handed folk using their thumb.
Surprised no one made an effort to update the charging handle. SO many good options for years now.
As a Brit I would Love Ian to do a Range shoot Vid with the L119a1/a2 whenever he gets a chance :)
Nice! Good back story with just enough detail to keep it interesting. Not too long so, I didn't forge the middle part.
Can i just appreciate the surprising way Ian says they came into USA by legal means, actually.
Theres alway been some question of legality of Colt Canada parts in the US because of the way Colt started bringing in things. I think some Colt Canada guns went to LE but Colt seemed to have forgot about 922r compliance and then never seemed to have a clear plan on Colt Canada products coming into the US.
For my first deployment I was issued a rebarreld GAU-5 and that barrel was shot out too. The the parkerizing had been warn off on every touch point and the places it remained it was so thin you could see through it. Every spring including the hand guard was mushy, and I’m sure that just about every surface was out of spec in some way. My second deployment was with an M4. It was more dependable but by then it had a decade of hard use behind it and it wasn’t exactly trustworthy either. So I was horrified when the SCAR 16 didn’t get picked up because I was firmly in the “ARs are junk!” camp. Now I’m a little older and a little wiser, but can’t help but but wonder if some of the ongoing “reliability concerns” about the AR family of rifles stem from work guns that are kept way beyond their service life.
You're right, and 249s are probably the best example. That said SAWs have a lot of quirks and should be upgraded for other reason.
@@jackjmaheriii 249s are pretty good, the US military takes really bad care of them, like no repairs/part replacements in over 10 years bad care. If anything, the fact that they still are decent despite how terrible US care for them is compared to other rifles shows that they are very good rifles.
We Brits seem to be doing a lot of business with Colt Canada as the Royal Marines are now all being equipped with the Colt C8, so far 42 and 43 Commando are fully equipped with the C8 with 40 and 45 to follow.
Great news as someone applying soon
Really enjoy your videos You manage to show a passion for guns and their history.
I believe colt and colt Canada pay royalty payments to LMT for the monolithic upper reciever. Colts lawyers did not do proper patent check before making it. When it first came out.
Is that include the 6940 and 6945 receivers?
@@UnrelatedNonsense apparently.
@@UnrelatedNonsense If you check the upper receivers, there's a US Patent Number that links to LMT's Monolithic Upper patent.
Expect Ian to get an official D-Notice for talking about stuff that the British Govt would rather keep secret :-)
Interesting... I wonder if UKSF feedback about the barrel nut issue is what drove LMT to develop their current quick change barrel system.
LMT’s quick change barrel system predated the Colt IUR. I presume Colt didn’t go with it because they wanted to offer the upper receiver as an upgraded upper for existing M16/C7 users.
Which did happen with the Dutch and Danish C7s and C8s.
@@classifiedad1 ooooh! I had no idea! Sounds about right for Colt.
@@classifiedad1 Indeed, for as far as I know, CC pay royalties to LMT.
You'd think with all the really nice ambi-charging handles out these days, you'd have one that's actually an improvement...I wonder why they stuck with that one?
Because they are "free" usually issued by Colt Canada as standard.
I was in the Canadian infantry reserves I used the c7, the longer charging handle is in my opinion better then the typical m4 charging handle. You can rack it faster and more efficiently, and I have never had it snag rucking, or in the field.
I have several of the newer SAS barrels and the coating could be vest described as being similar to the rubbery coatings put on truck beds. They are designed to prevent corrosion, considering the difficulty in cleaning the barrel under the monolithic handguard. Pretty neat texture.
Videos like this help dispel the ridiculous myth that just because SF are using/doing it it 'must be the best!'
SF, like all other government entities, has to deal with government incompetence.
I've got a few buddies on the teams, most common load out as per his unit, was a short barreled m4 with a suppressor and a glock in 9mm. Granted, it's been close to a decade since we talked about that stuff, so I'm sure things have changed at least a little bit.
In the past 20 years or so, it seems to be common for "inspiraton" to come from the private sector instead of the past gov-to-civ transfer of ideas, at least with fighting rifles and precision guns.
@@mattfleming86 no, that's the way it has always been. The Kentucky rifles that American revolutionaries were using definitely outclassed the production war muskets.
Yeah no.
Very candid and very informative, Ian. Thank you brother
man i love monolithic uppers
Those handguards are super nice and being a monolithic looks sleek as hell
All L119A2 are ambidextrous
That was part of the brief
The sling on the Nairobi rifle is a Frank Proctor sling. Paracord is in the design
You've the wrong charging handle on the A1
They missed 1/2 of the LMT’s upper advantages and probably still paid full royalties!
I was in SFSG and we used the A1s, the tier 1 guys (Hereford/Poole) had these and I can’t remember the reasons why but I do remember alot of them preferring the A1? As I say I can’t remember why exactly but my best memory of it was some of the SFCs attached to our unit got issued these as they were considered tier 1 (up for debate, don’t shoot the messenger lol) and I do remember both of the dudes I worked with said they preferred the A1 for some reason, I think it was a durability issue or something because they both had to take their rifles to the armorer numerous times, I just remember thinking these looked sick because of the monolithic rail and desert coloured grip and butt lol
delete this
Did you use the G -3 as well???
@@nickjohnson710 I didn’t sadly! They were in the armoury when I got to SFSG from 3 Para and they were used as a section/team sharpshooter rifle or DMR, I only did a short stint in a rifle company then went to snipers where they used the HK417 as they semi-auto 7.62 rifle as it’s considered better for a sniper role, so I missed out on ever firing a G3! Another thing that was annoying was seeing MP5s in the armoury but never getting the chance to fire one as they had been phased out by the time I got to the unit.
@@ryanwinchester6644 cool, thanks for the information.....did you enjoy your time in sfsg??? What other units did you work with besides afgan sf ???
@@nickjohnson710 yeah I absolutely loved it! I did more in 3 years there than I did in nearly 6 years at 3 Para lol I only got out because of family stuff really, if I was single with no kids I’d still be there. And as for other units I can’t say too much. The two obvious ones quite a lot, and US 75th Ranger regiment a fair amount as well as they were seen as our US equivalent. Any others would be unprofessional to say due to opsec.
He was 22 SAS, G- squadron his memoirs are fantastic would recommend people to read them for an in-depth look into the Kenyan incident.
Were have you read them???
@@nickjohnson710 he published a book after leaving the regiment 2 years ago.
What's the book called???
he's using Paracord as a sling attachment because he was utilizing the proctor sling and that's just how you attach them.
With all the great ambi charging handles available these days, it baffles me that they kept using that awful thing.
it quickly cuts cut down or removed on operational weapons
Only reason I can see is because colt Canada already had them around for their C7/C8 rifles. And that charging handle is not just for ambi use, that giant lever is also meant to be easier to operate with thick winter gloves, because Canadian winters are cold.
It's tradition now. They are obligated to keep it.
I'd love to see a video on the history of "handedness" in firearms. I assume at one point (like with so many things) everyone shot right-handed because that was the only "proper" way that one should shoot. This gun shows nods to the ambidextrous user, and truly ambidextrous firearms have been out there for a while now but never seem to become the norm. I'm left hand dominant but do some things righty and some ambi-, I started shooting lefty until I discovered that I'm very right eye dominant. So switching to righty was easy and meant I don't have to worry about controls as much.
The British seem to really enjoy their time-honored tradition of fielding their troops with quirky rifles. It has to take a lot of effort to get a mass produced M16 variant wrong in 2019.
People who overthink blind themselves, also people who live on islands tend to have smaller brains 😉
Thats pretty much the Danish M10/C8IUR. i'm pretty sure we use standard triggers on our guns... we have the same stock, ambi mag release and ambi charging handle. i have had one issued for over 4 years now and i must say that the gun gets hot in situations like CQB or suppressive fire but it's not that bad ( it's nice in the winter). i have on the other hand never had any issue with cleaning the gun nor maintaining it in daily service and deployment.
I'm surprised at the upper when you said that it was an MRP licensed from LMT. The real MRP since it was released ~15+ years ago has used a method of securing the barrel that uses two screws that are easily accessible from the outside of the upper. This was one of the selling points of the system; you could change barrel length and caliber in minutes. Is this a special military specific design?
The reason for my question is that I've owned two of the railed MRPs and neither of them looked anything like this.
@@killdizzle The big patentable item would be how the barrel is secured; there are many monolithic uppers out there, Colt's even has one of their own.
If I had to guess Colt Ca. just got a license to their patent to avoid legal setbacks.
@@killdizzle I'm not sure that would work as the two bolts are what put tension on that part of the upper to secure the barrel.
@@Antigonus. so thats why no one else makes them anymore, thank you for explaining that. It seems like thats created a misperception with the public that they are inherently unpopular because the designs have been discontinued.
@@kfeltenberger yes and that was what prompted the law suit and why LMT gets license rights, colt mono 6940 was the original infringement
These upper where briefly available in Canada as British contract overruns.
How and WHY do they keep going for the most horrible rear sling mounts lol? The C7A2 we use in Canada had a small recap that introduced a smaller ambi charging handle that doesn't require the locking clasp to be pressed, and a QD ambi sling mount. I find this all very odd...
I mean on the brightside the magpul stock has QD points so I doubt many are actually using the awful things.
@@KamikazKid True, but man that non-removable rattling part... god I absolute hate that lol!
Like a proper modern British rifle Ian takes some time to describe all the random parts that will fall off it
Yes it's actually Canadian, but they were making it to requested specs and probably sent a very sincere letter when they heard about it so I'm letting them off the hook.
I love the story about the 1 sas operator taking matter into his own hands. You can guarantee he was making a cup of tea before deciding “watch my tea, ill be back” legend has it, he got back to his tea BEFORE the water was even boiled (jokes of course)
i believe he was out shopping (dont quote me)
@@skyblue1954i feel like only the SAS would have operators that would go into a situation like this without backup. i may be bias because I believe the SAS are the best special forces unit in the world. Not saying other SF units arent great, of course they are. I just feel the British SAS are a cut above the rest
I would like to add a correction. He didn’t wrap the Paracord to make a sling point. Because he’s not even using it. He’s using the same set up I always used. Hook a carabiner to a loop on your vest/plate carrier to whatever side of the chest the buttstock goes on. Depending on whether you’re left or right handed. Then on the end of your buttstock, where your sling goes, use any type of Paracord set up you want. In the US Army Infantry we just called at 550 cord. I used a 550 cord bracelet that was on the end of my buttstock. Then, clip it up to the carabiner & let it hang from my chest. No sling in the way, nothing like that. And it’s in the perfect position, depending on where you put the carabiner, to raise your rifle up on target. And in the pictures, it looks like Christian Craighead is using it the same way. Looks like he has some Paracord looped around the butt stock and clipped to the carabiner.
Man we really are in the golden age of PDWs. Good quality at an affordable price. (Just talking about all of what is available, not this rifle)
Smaller correction: A 'gun' is a field artillery piece, the above is a 'rifle'
This rifle was used by a member of the sas that was embedded with the Kenyan special forces when al shabab attacked a business and shopping complex in 2019
Christian Craighead is his name 👍
that man is named Christian Craighead , hell of a dude , hes on the internet , go find em
Obi Wan Nairobi had the high ground
Btw there is a really good video on the topic
ua-cam.com/video/dSJni7zeiN0/v-deo.html
@Jona v.K or someone didn't have their subtitles switch on and their guide dog didn't speak Ian
“If you like the M4 or the 416 platforms, you’ll love this” That’s how I feel the pitch to sell this rifle went.
My first thought when Ian pointed out that monolithic upper was that getting to the barrel and gas system has to be a pain.
Pity the engineers didn't get a little input from the users.
You got a small amount of guys that use it and it's important that all their attachments stay zeroed to land shots with their laser/IR combos. So I wouldn't care much either if an armourer needs a long tool to take it apart or clean it in case someone dropped it in between the chicks in the 24/7 mud wrestling pit. There aren't a lot of options to quickly fix that issue and those uppers were already on the market.
I think someone (maybe LMT themselves or DD or someone) makes a version where the bottom rail is removable to be able to use M203s that attach in the standard fashion and not to the rail like the british chose (for some weird reason).
I mean, getting to that stuff with a DD RIS II isn't exactly easy either, lmao
@@МихаилЛевченко-с3б Why would you want to hang that anchor off your barrel if you can keep it free floating by hanging it off the bottom rail? That is the whole point of it.
I owned a 10" upper for several years, I actually preferred the barrel replacement on these to a regular AR. As long as you HAVE access to the barrel tool it's a breeze.
The heat shields are definitely finicky as hell.
I have to disagree about the heat buildup on these... I've got video of me blasting it on my channel, and I was lucky enough to get mine onto a select-fire lower receiver several times for testing (no video). Never got any hotter than other AR platforms. I did not shoot mine suppressed, the extra gas buildup from this might be to blame for the extra heat you're referencing.
I now have a Colt Canada MRR upper, the next generation of this upper receiver setup. It's basically the same thing, but with M-LOK.
Ian I love to see you do a video on the Dutch version of this rifle. Because we had our new versions of the colt canada c7 c8 and for the Dutch marines laow (lsw) and they already fixed the heating problems. Thing is we already had those guns in (i want to say) 2012-2013 if memory is correct.
As far as I know the KCT transfered over to the HK416A5 in 2010, and recent pictures of NLMARSOF do show HK416's as well. They did use C8A1GD before, and I am not sure when the transferred to the HK416 (or if that is even public knowledge). Regardless, the C8 was in service already before 2010. I do know there was a modernization of existing C7 and C8 rifles in 2009, called the C7/8NLD, which might be the version you are referring to. These are the versions with the relatively iconic hand-guards and stock in tan coloring.
I am not sure when the colt LOAW was introduced either, might have been at the same time as the modernization of existing C8/C7 weapons.
The Dutch rifles were Colt Canada's first iteration of their monolithic upper. The Dutch kept the original barrels and gas tubes.
I know we've seen lots of range days on artypes everywhere on the internet but I'd love a range day with some colt can products pls!
Something tells me that in 10-15 years, we'll be talking about L119A3 and Colt Canada's interpretation of WWSD 2020 design.
Cant afford this then. To expensive for the Brits 😄
SF would probably want heavier barrels, use collapsible stocks, super tough rigid rails (like this one) that hold zero of IR lasers. Its a pretty good seeming rifle. Would take one over a wwsd2020
@@tristanhodgden4286 Yeah, the WWSD is a fine civie/leo rifle, but a bit lacking for mil/sof. Though, the lancer handgaurd would probably make a nice, still semi light substitute, along with faxon's 'gunner' profile barrel, which is only 3 oz more and adds a decent bit of meat.
L119AW has been my dream upper for 5+ years
ERGO makes the best AR15 grips.
Yes I will die on this hill
They're okay
Regards the cocking handle. I'm sure some in service rifles have been pictured with Giessele airborne charging handles. Also, the Aimpoint T2 seems to be the standard CQB optic for A2s and is seen in more images than the Sig R4T and 'Christian Craighead' was using a Frank Proctor sling in Nairobi, rather than a self made paracord mod but a variety of slings have been seen in use on UKSF rifles.
So really it’s just another AR.
I didn't know the pin hole style buffer tube nuts were still in service.
I actually have the 15.7 upper love it. 🇨🇦
I have about a 6" lower and I love it all the same
You referenced the paracord holding the front sling point for lack of a solution but it appears that the other end of the sling is also paracord-ed...right OVER the QD mount point @ 12:46
A mistery
It's a Proctor sling I believe
I love how Ian implies the British Gov’t would be annoyed to find out that we can effectively get our hands on an exact copy of there SF rifle. I wonder if they would be even more annoyed to learn that most people wouldn’t choose this option over other ar-15 variants even if it flooded the market. That’s fun thing to think about, does it annoy them more that we can get it or that most people wouldn’t even buy it given the option? Not that it’s not good, just that you can get way more for your money on the American civilian market.
I gotta say that it looks really nice
I'm disappointed that they're trying to make an ambi AR-15 and they're using such a goofy charging handle. There are way better options
It was basically “how can we make an ambi charging handle, but without changing the basic body of the standard charging handle?”
Other than milling off that massive protrusion on the left, I’m not sure how you’d be able to do much better.
Looks at Radian
@@zachv1942 Sshh that's our secret sauce
It isn't goofy though, it actually works quite well, even with gloves on and snagging isn't that much of an issue amongst soldiers.
That looks exactly like the Danish Issued rifle. A Colt Canada C8UIR - although that does not have the silencer barrel
Ian - if you’d like to do a review of this rifles big brother (in .308, from LMT) I’d be happy to lend mine. I’m in Phoenix and take my kids to the air museum in Tucson every few months, so I can either ship or drop off. I don’t have an FFL so we’ll have minor complications, but that’s easy enough to overcome.
I think he already did one on the 308 lmt dmr the brits adopted.
@1:50 and is now CZ
I remember some of these uppers went up for sale here in Canada in 2018? I was tempted and regretted not getting one because of price until May 2020.
You might want to do something at some time about what being "left handed" actually means. That is generally thought of as being monolithic, you are right handed or left handed, and people are defined "Lefty" that way. In fact there are many more complications. I'm very much right handed, I write and throw with my right arm, but I bat left, shoot golf left, and shoot hockey left. Most people will bat right, almost everyone golf's right, yet the vast majority of those people will shoot in hockey left, and that requires changing their hand position on the stick from the way they golf or bat a ball. My hand order never changes and my right thumb touches the bottom of my left hand (or could in the wider grip for hockey). I'm also right eyed. I'm a photographer and like to watch other people pick up cameras. They will just put the camera's viewfinder to one specific eye without thinking, and that defines whether they are left eyed or not. It's almost impossible to change, and that's too bad, because 35mm style cameras are designed for right eyed shooters.
In any case your comment about finding more left handed shooters in that Brit special forces group, may turn out to be more "left eyed" shooters. I don't think that there's been much if any research done on this subject at all and I'm sort of surprised that it doesn't come up more often. From where I sit it looks like all of this "left" and "right" business is completely independent from each other, so the "left brain" "right brain" theories seem to hold very little water.
He shoots right despite being a lefty all the time, and points out that ambi guns are useful for switching up shooting left or right on the fly. The majority of people are still going to go "I'm a righty i shoot right" though.
@@realityshotgun the PDQ ambi bolt catch on the WWSD carbines actually makes the gun more right hander friendly :) I shoot with a sling a lot, no more twisting the rifle over to slap the release. I also like ambi safeties for quickly putting the rifle back on safe. It wasn’t difficult with just one, but it’s a little more convenient with two.
Really like the videos. One improvement I'd suggest is if you could slow down the camera a bit when you run it the lenght of the gun. The details might come through a little better.
Isnt the original ar-15 charging handle already ambidextrous?
Not really, not easily. About the same as saying the AK is ambi because you can reach over the gun to charge it.
I need to make sure to keep hitting that like button, this is one of my favorite UA-cam channels but I forget to show my gratitude.
So.... The new special forces rifle still has a bunch of features the special forces dont actually want, and a bunch of features the manufacturer cant even sell to them.
They learned a great deal from the L85.
Better call in Heckler & Koch, and get this sorted, ASAP. Again.
The “new” rifle? 🤔
Unlike the L85A1, this gun actually fires, so that's a plus.
the coating could be for rust prevention because of how hard it is to clean in there
In that terorist attack action was alsou CZ 807 7,62x39, version used also by Egyptian paratropers.
It’s actually In The process of getting replaced. It was a stop gap for the A1.
The heat issue would have easily been solved had Colt wanted to copy the monolithic uppers that had mlok in them, more open to allow air to pass through easier and could have had the option to run G10 railscales allowing for both better grip and heat shielding.
The issue is what the UK contracted for. If they say "we want rails" then that's what's used.
@@kfeltenberger yeah, and they can still have the rails. Hybrid rails utilizing both mlok and 1913 have been a thing for a good long while, and there are dead zones in the rail being shown easily capable of being slotted into a mill and have mlok slots cut, that's why at my shop I offer the service for these no longer produced LMT uppers to cut said mlok slots into them.