Izzy is the man I Watch every single one of his videos and keeps impressing me I am a carpenter by trade and I am have been cabinet maker for two years
Great vid! Your ability to design chairs left me speechless. They are the most difficult to get correct...structure/looks/comfort! Way to go. But, the best part for me was your helping folks with re-entry into life outside! Thank you. Those folks need our help and support and willingness to give them a hand up! Great job Izzy!
Классный дизайн . Решил повторить работал буквально на коленках. Нежная точных размеров получилось немного по-своему. В любом случае автору респект и уважуха
Wow! I know this video is 2 years old but man, this is a nice design. I really like that you're not so low to the ground and that the footprint doesn't stretch too far back. I have a thin front porch, so this style would look great there.
One thing about the Izzy, never see a fluff video; always something of real use and quality...I couldn't help but see several techniques that will carry over to so many other applications...
Du bist und bleibst einer der Größten! Deine effektive und Zeit und geldsparende Art zu arbeiten, ist phänomenal. Du bist Künstler und Könner in einer Person. ❣❣❣
Love them. I’m a furniture designer and have just a couple of ideas you or someone watching might consider. I would through bolt the critical joint and plug them, with plugs from a plug cutter so you don’t get end gain spots. If you are going to have cushions be sure to adjust the dimensions accordingly.if you want to go to the next level, pull the dimensions off perspectively, adds a lot of work with all the angles but well worth it.
Awesome as usual. I also love the Adirondack chair design, it’s been a favorite of mine for years. Genius work with the saw sled, I look forward to using your technique on future projects.
A great build. One suggestion. Use epoxy and screws to attach a one inch square strip of Trex or other engineered decking to the bottom of all your legs, no leg rot. Keep 'em coming.
Beautiful design, Izzy! Clicking Like (already a subscriber). These are definitely on my 'to-build' list. As a fellow big guy who makes you look skinny, I like their height over a traditional Adirondack (I generally need 2 friends and an engine crane to get out of something that low -- kidding, but it is a pain). I like how they're lightweight for easily moving them around (again, something you don't do lightly with the traditional design). I like how the front leg connects the arm, seat and rear leg for both strength and asthetics, I like the recessed slats, the whole look! And ignore the haters on that 2-screw seatback joint. The screw length is substantial, there are 2 of them in parallel (so they're pulling diagonally on each other, like a trapezoid resisting collapsing), plus the arm attached to the seatback is obviously helping keep it from opening up. The armless design might need a half-lap there, but it looks like you already half-lapped the front and rear legs on that one anyway, so you probably did so on the seatback joint as well. (Edit: Just noticed when you're painting that one green, looks like you bridged that joint with a gusset. Very strong!) Plus, they're gorgeous! Definitely on my 'to-build' list!
Amazing! I love the design! And anytime you toss in tips on how to add efficiency into production; well that's always a big plus! Thank you! Thumbs up for sure!
I'll be honest... At first I thought "Oh man, that looks like it might not hold me" ... I have to say, I'm blown away with you standing on it at the end of this video. My apologies for that. I love the design & the fabrication jigs you made. Superbitchinbadazzmakerpoints!
Izzy you a bad man I’m already on love with that chair. I don’t mind trying to build one or two. Thank You 😊
I have two holy cows... One for the design of the chair! And one for that table saw sled! Love this!
Make Something thanks man glad you dig it
Izzy is the man I Watch every single one of his videos and keeps impressing me I am a carpenter by trade and I am have been cabinet maker for two years
Very nice art project by y.
Wow. Out of the many videos I've watched, this was it. So very impressed. Thank you!
Great vid! Your ability to design chairs left me speechless. They are the most difficult to get correct...structure/looks/comfort! Way to go. But, the best part for me was your helping folks with re-entry into life outside! Thank you. Those folks need our help and support and willingness to give them a hand up! Great job Izzy!
Классный дизайн . Решил повторить работал буквально на коленках. Нежная точных размеров получилось немного по-своему. В любом случае автору респект и уважуха
Great job. I like the vacuum fixtures
I just finished making one a few days ago, it's comfortable and sturdy. Neighbors are amazed after trying it out. It's a home run.
These charis were just awesome!! What a beautiful addition to anyone's back yard or porch!!! NOICE!!!
Never cease to amaze me Izzy...What you do in an hour takes me a week...
Wow! I know this video is 2 years old but man, this is a nice design. I really like that you're not so low to the ground and that the footprint doesn't stretch too far back. I have a thin front porch, so this style would look great there.
One thing about the Izzy, never see a fluff video; always something of real use and quality...I couldn't help but see several techniques that will carry over to so many other applications...
the Skill saw skills are always amazing...
Blue one is my favorite!
What beautiful chairs! Ingenious techniques to boot.
Love the simplicity of this project! It is something useful I could make at home without buying any extra tools or fancy materials.
Great product and the way you are going to manufacture them is even better.
Izzy is the best.. Learned a lot from you izzy love you thanks a lot
Love the blue one! It really pops and looks super comfortable.
Awesome Izzy! As a big guy, I can certainly appreciate your design.
Wowsa! Simple design, great instructions, outstanding results.
Du bist und bleibst einer der Größten! Deine effektive und Zeit und geldsparende Art zu arbeiten, ist phänomenal. Du bist Künstler und Könner in einer Person. ❣❣❣
They’re really elegant, love the contrast between the painted and unpainted wood. Cheers Izzy!
DAMN nice design. Hit all three of my favorite areas. Fast, simple and cheap - just like me!
A good build I'm a designer furniture builder myself and I love the simplicity and functionality of it
Awesome project Izzy! I love the sleds.
Sheer brilliance.
Awesome! You need to make one with a rocker!
Just 3 words...Table Saw Sled
Very impressive mate
Really liked the multi cut jig, nice one. Thanks.
Great design Izzy!
Nice job Izzy.
Liked your sled jig that did multiple cuts.
The sled!!! That's an awesome tip 😀
Crafter Maker thanks glad you liked it. I
Love them. I’m a furniture designer and have just a couple of ideas you or someone watching might consider. I would through bolt the critical joint and plug them, with plugs from a plug cutter so you don’t get end gain spots. If you are going to have cushions be sure to adjust the dimensions accordingly.if you want to go to the next level, pull the dimensions off perspectively, adds a lot of work with all the angles but well worth it.
Really like the production tips. That sled got me thinking.
VERY good looking chairs. Great design and look fairly simple to build with just enough challenge to make it interesting. LOVE IT !!!!
Marvelous Izzy! Simply, beautifully marvelous.
Realy great chairs!
Great design and ideas and generosity to us and chair builders who will benefit from your genius.
That is an awesome design. Thanks Izzy.
You are a crafty craftsman! Great job. Thanks for the video.
Very nice video , you are a master maker . Thanks
Beautiful design man !! And that sled ... genius !!
As usual you came up with a nice design the chair is a good looking and practical thing to have and your sled just makes good sense
These are great!
These are awesome. I think I will build a few of these for our pond. Thanks for sharing this brilliant idea.
Hey Izzy
Your sled is crazy. I am blown away. I am wondering how something like that come to your mind? Who are you? Superman? Keep coming.
Great looking chair Izzy. I'm digging the sled too.
Great job, Izzy!
Very cool, will be making some this winter!
Gorgeous chairs
Great build izzy!
Awesome as usual. I also love the Adirondack chair design, it’s been a favorite of mine for years. Genius work with the saw sled, I look forward to using your technique on future projects.
A great build. One suggestion. Use epoxy and screws to attach a one inch square strip of Trex or other engineered decking to the bottom of all your legs, no leg rot. Keep 'em coming.
Great idea!
Awesome work Izzy! Great take on a classic.
That table saw sled was genius!
Awesome work Izzy! 👍😃👊
Hey Izzy good to see you making again. You're still the man! You the man. "I'm not worthy" lol
Impressive chairs.
Kinda keen to make one of these myself! Cheers! Also hi from south Australia
Holy moly you work fast !
Very good, Master Monster.
Beautiful design, Izzy! Clicking Like (already a subscriber). These are definitely on my 'to-build' list. As a fellow big guy who makes you look skinny, I like their height over a traditional Adirondack (I generally need 2 friends and an engine crane to get out of something that low -- kidding, but it is a pain). I like how they're lightweight for easily moving them around (again, something you don't do lightly with the traditional design). I like how the front leg connects the arm, seat and rear leg for both strength and asthetics, I like the recessed slats, the whole look!
And ignore the haters on that 2-screw seatback joint. The screw length is substantial, there are 2 of them in parallel (so they're pulling diagonally on each other, like a trapezoid resisting collapsing), plus the arm attached to the seatback is obviously helping keep it from opening up. The armless design might need a half-lap there, but it looks like you already half-lapped the front and rear legs on that one anyway, so you probably did so on the seatback joint as well. (Edit: Just noticed when you're painting that one green, looks like you bridged that joint with a gusset. Very strong!)
Plus, they're gorgeous! Definitely on my 'to-build' list!
This template is brilliant idea. Amazing job dude.
beautiful and unique design. geart work man
Cool Izzy, I think I'll make them. Thanks for sharing your knowledge and expertise...
very nicely done
Good job brother.
If the chair withstood Izzy, then he will stand any))) Excellent out of the chair.
Amazing! I love the design! And anytime you toss in tips on how to add efficiency into production; well that's always a big plus! Thank you! Thumbs up for sure!
Looks cool.
As always, I enjoyed this video. Your instruction is honest, open and down to earth. Great project! Congrats on your work with the non-profit!!
Very nice design, and it's always a pleasure to see you working! Blue one is my favourite.
22" Wide! That's Ginormous !!
Nice design and great video.... Thanks brother !
Amazing skill brother!! You are a gifted carpenter
great project, good use of templates, greetings from Costa Rica
I'll be honest... At first I thought "Oh man, that looks like it might not hold me" ... I have to say, I'm blown away with you standing on it at the end of this video. My apologies for that. I love the design & the fabrication jigs you made. Superbitchinbadazzmakerpoints!
These are very cool
very cool, i will try it out thanks man.
Great work!
Always impressed with your work
Good to see you back on da Tubes man... look forward to more shenanigans...
nice chairs, clever sled! keep up the good work!
izzy, Wow the design of all the chairs and the sled jig tip. Absolutely amazing work🙌
That table saw sled is inspiring (hopefully you aren't going to get in trouble for sharing industry secrets!)
Benjamin Stephens lol I taught them to do them to do it first now I am just passing it on. ;)
Love the design looks great , I prefer the one with the arm tho. Looks more comfortable.well done
Awesome build!!! I think I’m gonna try and do them out of steel
Nice to see you. And nice to see you work. Thanks for the video (and the podcast too).
You really are brilliant
These are incredible. I love the design. I can't wait to try and make some. Fantastic work.
That’s awesome man. Great video Sir. Thanks for sharing.
That's awesome Izzy!!!
Sleek and stylish. The chairs are awesome too 🤣🤣
cool designs ,later down i will love to know how they are holding up
Great build Izzy. I wish I discovered you before you left Charleston. I live in Summerville and it would have been nice to have met you.
Awesome
I might try to build one
Love the chair without the arm rests....BUT...can we see a version that is foldable for storage 🤔
I like your videos. Minimum tools needed.. thx man
Nice work