I bought off Aliexpress for £73 a few months back a very acceptable turtle, with a NH36 instead of the 35, a beautiful dark red sunburst dial and has a glass bezel insert which is also lumed and the quality is just gawjus, I was going to Seiko up the dial but to be honest I think it looks way better and I can always buy a stick on logo if it really became an issue. Just bought too a heavily modified tuna, has a deep knurled body and bezel sides, never seen one like this, has a 4R35 in as it did start life off as a genuine Seiko and only fly in ointment is it has a snapped stem but NH35 stems are plentiful so no biggie :D
Love your videos, just one little critique, the indicies lume is white while the hands lume are yellow. during daytime viewing I would want the lume to be the same colour. I really enjoy how you put the watches together, the alignment and accuracy are second to none. You do a better job with basic tools than the professionals with pro tools. Keep the mod videos coming, very entertaining.
Thank you😊🙏 I've got +50 inspiration just now!😁 I agree about the hands. Now I change the indices to march the greenish hands or put more while hands to match the lume🙏
You make it looks so easy to do but obviously is a very meticulous job not for everyone! Also need to have all this tools to do it! But makes me think about doing that one day😅
No I know you were but it was still unexpected and funny. Your tip to set the hour hands slightly forward, that’s the first time I’ve heard this. Do you just set it forward one or two minutes ahead?
@@roger.bhutan it comes with the feeling, hard to explain 😅 If you set the time to midnight super slowly, then you probably can send the hour hand exactly on 12. But usually our moves are not 100% accurate, and we overdo it without noticing. That's how I come up with this idea and it works for me
@@ShortBetter ah, I wondered that. That must be why some only say half the word. Probably to protect express from getting in trouble. Makes sense now. Thanks!
All these wonderful posts on how to replace dials, hands, movements etc, and yet no one bothers to explain the process involved in making them dive proof/water proof again..
It's simple😊 1. Get a really good waterproof case, not the one for 30-50$ from Ali 2. Make sure all the gaskets are in good shape, use a silicone grease for the gaskets again. 3. Cross your fingers and go to swim😄
I believe it is counterfeit only if you were told it's the original Seiko. All my customers know that it's a modification, it's important to make it clear
@JohanDee Yes, they do. But different cases have different crown positions: 3 / 3.8 / 4 / 4.1. Therefore, the fit position is different and does not always match
Are there any Seiko Dials (faces) that have pins that fit the Steeldive 1970 or Addiesdive equivalent? Looking to mod towards a Seiko 6105 but would prefer pins to fit NH35 movement.
Yes, only 28,5mm. If you will use 29mm, which will fit too, you might get issues after you close the back cover. I used 29mm a few times and every time had a problem
It actually works. I can open it from my computer. If you use your phone and it shows "the page is not found" or something like that.. Then just wait a couple of seconds, it will load it anyway
I wanted to, but didn't try. Afraid to break it too😅 I removed only bezel inserts, there will be another mod video soon. I was modding Willard, removed the bezel insert but the new one didn't match🤣
@@ShortBetter Would love to see a bezel swap too. If there was a fitting bezel made of aluminium with only a dot at the 12 o'clock position I would be very happy if someone could post a link.
@miguelgorostizaotero5787 Read the question above carefully 😉 The person asked about the movement. Obviously, Steeldive is a Chinese brand. And I bet you don't have one yet😁
Well.. Firstly, I have a separate room for making my mods, so it's pretty clean. Also, I have a good source of light and eyesight 😅 Just check it twice before closing the case
How come you couldn't show how you adjust the balance wheel? If you've modded around 50 watches, how come you have the absolute minimum levels of tools. A screwdriver, pin pusher, soft cloth and blower. Need to upgrade the toolkit my friend.
I can't show how I adjust the balance wheel because I use my phone to film the video. I use Accuracy app on the phone for that purpose. Perhaps I need to get another phone just to make this video😄
And about the tools. I think you noted it right. With more experience, you need fewer tools. I could get some fancy hand presser, but what for? I can do it by hand with 95% precision. But I do need to change the cloth I use for the movement though 🤣🤣
I can do better haha. Here are the links for all the tools 1. www.aliexpress.com/item/1005004233749809.html?spm=a2g0o.productlist.main.3.30b631a30PUa0T&algo_pvid=7e7a272c-012f-412e-9c65-c307f95ec5ea&algo_exp_id=7e7a272c-012f-412e-9c65-c307f95ec5ea-1&pdp_ext_f=%7B%22sku_id%22%3A%2212000028472960452%22%7D&pdp_npi=2%40dis%21THB%21311.08%21161.76%21%21%21%21%21%402145280e16751727796043328d0708%2112000028472960452%21sea&curPageLogUid=ZZjorEn7Uitn 2. www.aliexpress.com/item/33047145131.html?spm=a2g0o.productlist.main.41.30b631a30PUa0T&algo_pvid=7e7a272c-012f-412e-9c65-c307f95ec5ea&algo_exp_id=7e7a272c-012f-412e-9c65-c307f95ec5ea-20&pdp_ext_f=%7B%22sku_id%22%3A%2267477060589%22%7D&pdp_npi=2%40dis%21THB%2189.39%2166.14%21%21%21%21%21%402145280e16751727796043328d0708%2167477060589%21sea&curPageLogUid=Rj0zY6fsn0UI 3. www.aliexpress.com/item/4000174953976.html?spm=a2g0o.productlist.main.55.30b631a30PUa0T&algo_pvid=7e7a272c-012f-412e-9c65-c307f95ec5ea&algo_exp_id=7e7a272c-012f-412e-9c65-c307f95ec5ea-27&pdp_ext_f=%7B%22sku_id%22%3A%2210000000613212441%22%7D&pdp_npi=2%40dis%21THB%21234.45%21234.45%21%21%21%21%21%402145280e16751727796043328d0708%2110000000613212441%21sea&curPageLogUid=WxFhdAVR6Q4G
How about buying the right dial for the movement instead of putting tape in your watch. Double sided adhesive or dial stickers is not what you do if you care about your watch mod, the dial will move eventually. If you take the time you can find the exact dial you want for your mod that will fit the movement you have.
@@johnleonard3951 No, the SD1970 has the crown at a slightly different position than the standard Seiko position. In the Seiko 6105, 7002 and both 6309s it is exactly at 4, on the SKX it moved a bit earlier than 4 and on the SteelDive, in order to resemble the willard look they moved it a tad behind 4 o'clock.
Sure I can, but what's the point? Living one life, kindness is the key 😊 Many people still wanna buy it knowing it's a mod, because the price is really affordable
Dude you keep commenting on these videos. No 6105 from !!!1971!!! Has pearly white lume. Half of these came from humid climates. They are in collectors condition- rarely good. And plus the text is not on par w original. Same goes for vintage submariners. Tons of people mod one for personal use. You can't supply the masses w a vintage watch not in production and rarely showing 80 on the public market. Your being a bummer. And read about 3 of your comments spanning some of these seiko videos. Hell I'm not even a huge seiko guy. But I can tell you I know ebays a gamble regardless. I don't buy 7002 mods and there is a million on ebay. I clearly can tell an original or atleast a haggled together skx or 7002 from even a oem dial or these wild creations made in the Phillipines. Comes down to you gaining more knowledge of not only this hobby but apply critical thinking to any of them. Wish you come down off your bummer
@@ShortBetter yes if there is possible options not the display glass but original metal case for seiko willard. I watch one of your video changing to glass and it looks better but was thinking of changing the case back to replicate the original thing . Would feel more original and Ill be more happier knowing I have seiko willard for a bargain.
I don't see the point of this. It doesn't personalise the watch, only makes it more disingenuous and potentially illegal. It doesn't do both Seiko and Steeldive justice.
I agree on the second point. Many people want to modify their watches but don't know how. That's why I made this video, to show how easy it is to change the dial at least
It's only illegal if you sell the watch as a genuine or counterfeit Seiko. I too don't see the point unless it is an amazing dial only Seiko make. Nevertheless it is a useful video.
Everyone can do as they please. But I would feel like a fraud if I turned my Heimdallr Willard with a fake Seiko dial into a semi-fake watch. I'd rather stand by wearing a great homage.
I understand you :) Most of my customers love Seiko watches, but they don't want to spend a lot of money. I think that's reasonable to get "Seiko quality" but 2-3 times lower price
Updated link for the dial - s.click.aliexpress.com/e/_EGgYOO1
Hi, can i have a working link? this not working... thanks
Yes plz
@@starfighter-mpzdone😊
@@zahirtiab1710done, try now😊
Forget these Haters. You clearly have taken a few nh35s apart. Nice job. Good attention to detail. Enjoy the watch. Looking to build one myself
Thanks! There gonna be more mods soon 😊
Thank you for this instructive video, I'm going to do a dial and hands swap on a Heimdallr watch and this video is what taught me how to do it.
You're welcome! I'm glad it's helpful😊
I bought off Aliexpress for £73 a few months back a very acceptable turtle, with a NH36 instead of the 35, a beautiful dark red sunburst dial and has a glass bezel insert which is also lumed and the quality is just gawjus, I was going to Seiko up the dial but to be honest I think it looks way better and I can always buy a stick on logo if it really became an issue. Just bought too a heavily modified tuna, has a deep knurled body and bezel sides, never seen one like this, has a 4R35 in as it did start life off as a genuine Seiko and only fly in ointment is it has a snapped stem but NH35 stems are plentiful so no biggie :D
I keep waiting when they will send me NH36 instead of 35 haha. I have a really nice dial for NH36, but no movement :D
Love your videos, just one little critique, the indicies lume is white while the hands lume are yellow. during daytime viewing I would want the lume to be the same colour. I really enjoy how you put the watches together, the alignment and accuracy are second to none. You do a better job with basic tools than the professionals with pro tools. Keep the mod videos coming, very entertaining.
Thank you😊🙏 I've got +50 inspiration just now!😁 I agree about the hands. Now I change the indices to march the greenish hands or put more while hands to match the lume🙏
You make it looks so easy to do but obviously is a very meticulous job not for everyone! Also need to have all this tools to do it! But makes me think about doing that one day😅
Thanks! Lot's of practice will be anything look easy haha
The STEELDIVE 1970is my favorite everyday watch from AE. I may consider a modification.
Try, many different dials will match with this case. But be careful with hands, it's really easy to mess them up
I was thinking of doing the same thing, I have ordered a more accurate willard dial than the one you used though.
Great video! You made putting the hands on look easy!
Thanks😁😁
8:28 funniest quote of the video 😂
I was serious 😁😁
No I know you were but it was still unexpected and funny. Your tip to set the hour hands slightly forward, that’s the first time I’ve heard this. Do you just set it forward one or two minutes ahead?
@@roger.bhutan it comes with the feeling, hard to explain 😅 If you set the time to midnight super slowly, then you probably can send the hour hand exactly on 12. But usually our moves are not 100% accurate, and we overdo it without noticing. That's how I come up with this idea and it works for me
Great video! Where can I find a Seiko dial to replace a PD day just? On AliExpress I only see dial faces that are blank. They dont say Seiko.
You have to chat with the seller to confirm if it's with seiko logo 😉
@@ShortBetter ah, I wondered that. That must be why some only say half the word. Probably to protect express from getting in trouble. Makes sense now. Thanks!
All these wonderful posts on how to replace dials, hands, movements etc, and yet no one bothers to explain the process involved in making them dive proof/water proof again..
It's simple😊
1. Get a really good waterproof case, not the one for 30-50$ from Ali
2. Make sure all the gaskets are in good shape, use a silicone grease for the gaskets again.
3. Cross your fingers and go to swim😄
if all the gaskets are in place and in fine condition why would you worry about waterproofing them again?
Can you put a link for the dial?
There you go :) s.click.aliexpress.com/e/_DBFSS4Z
hello great video, is it waterproof as they claim?
@@mzzybex6754 it is waterproof 😁😁
Looks great, good job!👌
Thank you 😊
Hello :) I already made a titanium 6105 with a nh35, I love this case so I'd like to make a GMT with a nh34. Would it fit in that case?
Yes, there is plenty of heigh under the glass, NH34 should fit too
You made that look easy
I believe all you had to do was cut 2 of the prongs in the back of dial... that looks like an nh35 movement and that dial is for either nh35/nh36.
Yeah, I tried, but one of them is about 1mm lower or higher, so it really doesn't match 🥲
It does not match, I did the same mod, only with a grey dial. You have to use the stickers, but it is good that way too
Those feet are made for 3 o clock crown or 3,8 o clock, si if the crown is at 4 it won't always match.
Nice mod! Looks great!
Thanks! 😊
Methodical. Love it.
Thank you 😊☺️
It looks great.
Is it a counterfeit now?
Tell me why or why not...
I believe it is counterfeit only if you were told it's the original Seiko. All my customers know that it's a modification, it's important to make it clear
@@ShortBetterlol still counterfeit
@samteks125 no it's not.
I don't understand that the Seiko dials have pins at the back. Aren't they supposed to fit the Seiko movements like the NH35A?
@JohanDee Yes, they do. But different cases have different crown positions: 3 / 3.8 / 4 / 4.1. Therefore, the fit position is different and does not always match
Are there any Seiko Dials (faces) that have pins that fit the Steeldive 1970 or Addiesdive equivalent? Looking to mod towards a Seiko 6105 but would prefer pins to fit NH35 movement.
I couldn't find it yet, tried many different dials
Aftermarket Seiko dials. Otherwise use dial dots and cut off the feet.
Looks good. Can you please confirm if the dial has ~28,5mm in diameter?
Yes, only 28,5mm. If you will use 29mm, which will fit too, you might get issues after you close the back cover. I used 29mm a few times and every time had a problem
I don't get the idea why creating a fake from a hommage which is just perfectly fine? Good job on that though! :)
Hello, can you provide a working link to the mod's page on Aliexpress? The old link doesn't work.
Sure! Will do now
It actually works. I can open it from my computer. If you use your phone and it shows "the page is not found" or something like that.. Then just wait a couple of seconds, it will load it anyway
Have you ever swapped the crystal on a sd1970? I’m thinking about adding a domed sapphire but not sure if it’s feasible. Thanks!
Hi, yes😊 I swapped lots of them. Double dome sapphire looks really impressive
Thanks so much! I’ve never changed a crystal before and I’m excited to try! Really appreciate the reply!
@samcarr218 good luck! In the few latest videos I changed the crystal. Take a look before trying. There is a small detail that makes the difference
I want to do sme modification in my SD1970 but i don't find dials with seiko logo. Where could i get one? Thanks in advance
Where did you search? There are plenty on Aliexpress 🤔
the link to the dial no longer exists! What is the correct dial size compatible with the SD1970?
Both 28.5 and 29mm will fit
@@ShortBetter obrigado 🙏🏻
Now I will never a used willard unless from Seiko authorized after opening the case and checking the back of the dial😂
Have you been able to remove the bezel of a Steeldive, I tried but failed damaging the bezel..
I wanted to, but didn't try. Afraid to break it too😅 I removed only bezel inserts, there will be another mod video soon. I was modding Willard, removed the bezel insert but the new one didn't match🤣
@@ShortBetter Would love to see a bezel swap too. If there was a fitting bezel made of aluminium with only a dot at the 12 o'clock position I would be very happy if someone could post a link.
@@ShortBetter Did you try filing it to size using 1000 grade sandpaper? Others have made bezels fit for purpose by shaping it like that.
@@michaeldemarillac9992 I had to sand another bezel insert once.. And it took me so much time to fit it perfectly 🥲🥲 Don't want to do it again
Hi. Movement is original Japan or chinese replica. Please , answer me.
As far as I know, steeldive uses original movements. But it really depends on how do you define what's original and what's Chinese replica haha
@@ShortBetter :)
@@ShortBettera chinese replica is not a real japanese Watch, don’t be wrong
@miguelgorostizaotero5787 Read the question above carefully 😉 The person asked about the movement. Obviously, Steeldive is a Chinese brand. And I bet you don't have one yet😁
hi bro can help, i can't find this dial in aliespress. your link also no longer exist
Will update the link shortly, thanks for telling😊
Could you fit a VH31 movement in this case? 👍
Nope
Do you make sure there’s no dust on the dial? If yes how do you do it
Well.. Firstly, I have a separate room for making my mods, so it's pretty clean. Also, I have a good source of light and eyesight 😅 Just check it twice before closing the case
Does the bracelet suck?
In my opinion the bracelet is good already. Especially after they upgraded the clasp, but still can't compare to Seiko or anything more expensive
You should get a brass movement holder
It is really that useful?
Отличный обзор THANK !
BRO где купить такой циферблат ?
Aliexpress has everything haha
Where can I get those small double sided Scotch tapes?
Aliexpress has everything 😁 Nwxt time when you order a dial or any other parts, ask the seller if they have dials dots
@@ShortBetter Thanks a lot, I have just found them. I really like your videos.
@@grandiogenes Thank you!
my friend,,, can we replace the bezel insert with seiko skx size ?
I'm not sure about that. Right now, I'm also searching for the new bezel insert for this model
@@ShortBetter what about the steeldive tuna model,, can is it ?
@@kharismawardantobaktiawan8400 sorry, I can't answer you
@@ShortBetter Thnks Bro
Can you please share the link to the exact dial please?
Just checked and it turns out I ordered it from a Thai local website. But if you use image search on AliExpress you will find plenty of such dials 😊
s.click.aliexpress.com/e/_DBFSS4Z
How come you couldn't show how you adjust the balance wheel? If you've modded around 50 watches, how come you have the absolute minimum levels of tools. A screwdriver, pin pusher, soft cloth and blower. Need to upgrade the toolkit my friend.
I can't show how I adjust the balance wheel because I use my phone to film the video. I use Accuracy app on the phone for that purpose. Perhaps I need to get another phone just to make this video😄
And about the tools. I think you noted it right. With more experience, you need fewer tools. I could get some fancy hand presser, but what for? I can do it by hand with 95% precision. But I do need to change the cloth I use for the movement though 🤣🤣
Hi. Could you write down a list of the different tools used in this video please?
Didn't see your question, sorry for late reply
I can do better haha. Here are the links for all the tools
1. www.aliexpress.com/item/1005004233749809.html?spm=a2g0o.productlist.main.3.30b631a30PUa0T&algo_pvid=7e7a272c-012f-412e-9c65-c307f95ec5ea&algo_exp_id=7e7a272c-012f-412e-9c65-c307f95ec5ea-1&pdp_ext_f=%7B%22sku_id%22%3A%2212000028472960452%22%7D&pdp_npi=2%40dis%21THB%21311.08%21161.76%21%21%21%21%21%402145280e16751727796043328d0708%2112000028472960452%21sea&curPageLogUid=ZZjorEn7Uitn
2. www.aliexpress.com/item/33047145131.html?spm=a2g0o.productlist.main.41.30b631a30PUa0T&algo_pvid=7e7a272c-012f-412e-9c65-c307f95ec5ea&algo_exp_id=7e7a272c-012f-412e-9c65-c307f95ec5ea-20&pdp_ext_f=%7B%22sku_id%22%3A%2267477060589%22%7D&pdp_npi=2%40dis%21THB%2189.39%2166.14%21%21%21%21%21%402145280e16751727796043328d0708%2167477060589%21sea&curPageLogUid=Rj0zY6fsn0UI
3. www.aliexpress.com/item/4000174953976.html?spm=a2g0o.productlist.main.55.30b631a30PUa0T&algo_pvid=7e7a272c-012f-412e-9c65-c307f95ec5ea&algo_exp_id=7e7a272c-012f-412e-9c65-c307f95ec5ea-27&pdp_ext_f=%7B%22sku_id%22%3A%2210000000613212441%22%7D&pdp_npi=2%40dis%21THB%21234.45%21234.45%21%21%21%21%21%402145280e16751727796043328d0708%2110000000613212441%21sea&curPageLogUid=WxFhdAVR6Q4G
You can start with these, but I would recommend to spend a bit extra and get better quality tools
@@ShortBetter Thank you man!
Can you please put a link for the dial
Sorry, I ordered this one from a local store, not AliExpress 🥲
s.click.aliexpress.com/e/_DBFSS4Z
👍👍
Lookn good
seiko dial skx 007 for haimdallr tell me
You will find everything on AliExpress. I don't have the exact links
What’s the dial size?
29mm
How about buying the right dial for the movement instead of putting tape in your watch. Double sided adhesive or dial stickers is not what you do if you care about your watch mod, the dial will move eventually. If you take the time you can find the exact dial you want for your mod that will fit the movement you have.
Yes, it makes sense. I found these dials long ago and since then keep using them without thinking about upgrading. Thanks for your thoughts!😊
The thing is you wont find a fitting dial fir the steeldive because of the crown position which is unique/different to amy seiko models
@@MoNinetyFour Exactly, that's the problem 😅
@@MoNinetyFour a crown at 4 , unique compared to saiko. That is 80% of seiko watches
@@johnleonard3951 No, the SD1970 has the crown at a slightly different position than the standard Seiko position. In the Seiko 6105, 7002 and both 6309s it is exactly at 4, on the SKX it moved a bit earlier than 4 and on the SteelDive, in order to resemble the willard look they moved it a tad behind 4 o'clock.
And now you can rip people off on eBay when sell it.
Sure I can, but what's the point? Living one life, kindness is the key 😊 Many people still wanna buy it knowing it's a mod, because the price is really affordable
Dude you keep commenting on these videos. No 6105 from !!!1971!!! Has pearly white lume. Half of these came from humid climates. They are in collectors condition- rarely good. And plus the text is not on par w original. Same goes for vintage submariners. Tons of people mod one for personal use. You can't supply the masses w a vintage watch not in production and rarely showing 80 on the public market. Your being a bummer. And read about 3 of your comments spanning some of these seiko videos. Hell I'm not even a huge seiko guy. But I can tell you I know ebays a gamble regardless. I don't buy 7002 mods and there is a million on ebay. I clearly can tell an original or atleast a haggled together skx or 7002 from even a oem dial or these wild creations made in the Phillipines. Comes down to you gaining more knowledge of not only this hobby but apply critical thinking to any of them. Wish you come down off your bummer
I don't know why you would want to change an homage into a knock-off?
It's fun to play with the watches. It's like a box of chocolates. You never know what you get until you try different combo😊
my steeldive goes too fast after walk. 10s in plus after 1h walking
@@Przemeknoname you have a problem with the movement, 10sec is too much
@@ShortBetter when stays on the table IT has 1s pro day. When i wear IT then goes much faster
@Przemeknoname if you just received the watch from Aliexpress, you can claim your money back. I believe you will win the dispute
Life is too short!
How about the back case ? Is there any seller for the seiko willard design ?
You mean changing the back case as well? I think there might be somewhere, I didn't check
@@ShortBetter yes if there is possible options not the display glass but original metal case for seiko willard. I watch one of your video changing to glass and it looks better but was thinking of changing the case back to replicate the original thing . Would feel more original and Ill be more happier knowing I have seiko willard for a bargain.
NH-35 much better movement than the over priced inaccurate 6R-35.
There are so many overpriced things in this world... But some people want to pay more for the logo
why keep taking watch out of camera range all the time
Haha, you are right! It's hard to mod and check the camera at the same time. When I focus on the watch, I forget about the camera :D
where to buy such a dial
Can check on AliExpress "Seiko dial 6105"
@@ShortBetter thank you very much friend
@@СашаГильфанов-ы5ф You're welcome
@@СашаГильфанов-ы5ф s.click.aliexpress.com/e/_DBFSS4Z
Now it's a fake, but a nice tutorial.
Thank you🤣😁🙏
@@ShortBetterfake is fake as its owner
@miguelgorostizaotero5787 Thank you for keep watching my tutorials😊🙏
I need a Seiko skx007 dial under
Check on Aliexpress, I really don't have links for this dial
Great work, you have travestite a chinese copy in a fake japanese Watch…
Thank you for your support and watching my videos😊🙏
@@ShortBetter no, I really not support your videos, but you can learn a lot watching “Horology Hacher”.
I could not put the second one, so my steeldive end up being an hour and minute watch ahhaha
@@jeronimachraubert7121 It happens 😅😅
I don't see the point of this. It doesn't personalise the watch, only makes it more disingenuous and potentially illegal. It doesn't do both Seiko and Steeldive justice.
I agree on the second point. Many people want to modify their watches but don't know how. That's why I made this video, to show how easy it is to change the dial at least
It's only illegal if you sell the watch as a genuine or counterfeit Seiko. I too don't see the point unless it is an amazing dial only Seiko make. Nevertheless it is a useful video.
Pliz , Pliz ! ! !
Wear (finger)gloves.
Wearing in my newest videos, thank you :D
why the music in the background?? distracting and annoying... otherwise a good video but ruined by the music imho
@bosephusjr you watch the first 3 min only?😁😁
Heresy,travesty,blasphemy!!
BS
Please email, I would love to chat more...
Thank you,
Kurt
Here you go, Alexhuk789@gmail.com
who you tryna fool?
Thanks for supporting my channel
Everyone can do as they please. But I would feel like a fraud if I turned my Heimdallr Willard with a fake Seiko dial into a semi-fake watch. I'd rather stand by wearing a great homage.
I understand you :) Most of my customers love Seiko watches, but they don't want to spend a lot of money. I think that's reasonable to get "Seiko quality" but 2-3 times lower price
@@ShortBetterWhat would be reasonable is to buy a Seiko 5 if you can't cough up more cash. Creating a hideous FEIKO, however, isn't.
You're completely wrong chuckles 🤡 @@samteks125
It's ok if it's Seiko, somehow.
@@samteks125 it's not a feiko. The main part is seiko and it's built better. Get over yourself fella
how about the crown?
How about the crown?