Jeet is the perfect fit to this random cast of characters that Is Navigation Nowhere. His bus is starting to come together and looking good. It might not be fast, but at least it's moving forward. Good work gentlemen, keep up the progress.
Ill give you a tip about leaks the travel under paint low points usually people think they find the leak but the dont find the entry point it always flows down . So you can silicone seal paint and think all is ok but where the paint starts is compromised thats where it enters
Unfortunately I did not get to register in time to do at least a day trip over in Melrose. There's such a wealth of knowledge I could learn by going there. There's so many little things I need to do in my bus that for most of you would be a cinch but for me it's tough. I watch this and I'm like oh my gosh I want to do all of that in my bus but I'm literally living in it. It's gutted but it hasn't had the walls ceiling or floor subbed in.
If you get a chance to attend one of the events, it is a great time and wealth of knowledge. Everyone is so friendly and inviting, we have great community. Hopefully you could make it to one in the future!
@@navigationnowhere My first event that I went to was when it showed up to Gainesville Florida at the oaks Mall. I will see if I can get out there I just can't guarantee it.
Looking GREAT!!! You may consider some sort of "shade" strip under the light bar to dissipate any resulting windshield glare if you ever plan on driving with it turned on.
Watched Dale's video yesterday. Sorry to here about your back. My you know what was puckered this whole video not wanting to see it. Glad I didn't. Hope you are getting better and get to Florida soon.
The roof metal under the fan is safe from rust and primed. I will be painting the roof with the silicone rv sealant later with jeet. Then lap sealant over the max fann seams and screws. I could have done it before installing the fan but we cant really paint in the barn with the temps this winter so it will all get painted once we see 50 degrees on the weather forecast.
“Jeet-in-the-box” just crank the handle 😅😅 So should it be mentioned that you used blind rivets? Also, did you use Sikaflex for sealant on roof or another brand/type? Always enjoy your videos
Probably won't like the light bar in that spot. Because when in the van driving and flip it on. It's going to have a lot of glare on the windshield. No good
Anyone from the NE USA that wants to know how they can do vacation/van/bus life and have a sustainable income without convincing someone to buy something. I'll share what I'm doing.
Last four people who stopped by the shop: 1)software engineers - fully remote 2)crane operator - scheduled 8 months out of the year, travels 4 months 3) graphic designer - fully remote 4) general construction - works contracts and moves on to new location.
since the hatch panels are permanent i dont understand why you wouldnt weld them instead of all the drilling/riveting and caulking... welding would eliminate all the xtra steps and water proof at the same time. i could understand it better if you didnt have a welder/didnt know how to weld at all, but clearly not the case since you weld things all the time.
Are you ever going to get out on the road and enjoy some Travels??? STOP BEING A WORKAHOLIC!!! LET YOUR FRIENDS DO THEIR OWN BUSES!!!! IF THEY NEED SOME ADVICE....HELP THEM...BUT STOP DOING THEIR WORK FOR THEM !!!!!!!! GET OUT AND travel!!!!!
LOL " Peeka Jeet" too funny
haha, Jeet's jokes 🤣🤣🤣👍
He is so quick with them!
Jeet is the perfect fit to this random cast of characters that Is Navigation Nowhere. His bus is starting to come together and looking good. It might not be fast, but at least it's moving forward. Good work gentlemen, keep up the progress.
Michael, we miss your posts out here in the UA-cam-verse. Hopefully you & your family are doing well.
Didn't realize yall lived so close to me. Hopefully I'll run into yall camping sometime in the skoolie when I get done with my new build.
Bro one of my favorite channels and I've had no notifications for over 8 months
Posting goes on the back burner in harsh winter environment? Some mentioned back problems. Maybe a boring make money job because Reality?
So bright I gotta wear shades!!!
Peek a Jeet! 😂☠️ I couldn’t even breathe I laughed so hard.
Hi Michael what's going on Love what you do all the projects I can't wait to see everything when its done
You guys are having way to much fun lol. Looking good 🇨🇦🇨🇦
We can have more when you arrive!!
I also like to mount an LED bar under the hood as a work light for the engine compartment. Just using the switch on the device.
We were talking about adding a few led’s under the hood and chassis for potential late night work.
@@navigationnowhere Breakdowns always seem to happen to me at night!
Youre amazing. Progress is progress
Got a lot accomplished.
It’s been really cool to see Jeet’s vision and project start coming together.
We are missing you
A video will be up tomorrow. Uploading it now!
Glad you are doing good and back posting ! Great video as always and good help too !!
Thanks! I hope you enjoyed this one.
Charlie Cox really can do everything...
Love it fellas
Miss you Jimmy!
Ill give you a tip about leaks the travel under paint low points usually people think they find the leak but the dont find the entry point it always flows down . So you can silicone seal paint and think all is ok but where the paint starts is compromised thats where it enters
Looking forward to the build..and spring 😀
Unfortunately I did not get to register in time to do at least a day trip over in Melrose. There's such a wealth of knowledge I could learn by going there. There's so many little things I need to do in my bus that for most of you would be a cinch but for me it's tough. I watch this and I'm like oh my gosh I want to do all of that in my bus but I'm literally living in it. It's gutted but it hasn't had the walls ceiling or floor subbed in.
If you get a chance to attend one of the events, it is a great time and wealth of knowledge. Everyone is so friendly and inviting, we have great community.
Hopefully you could make it to one in the future!
@@navigationnowhere My first event that I went to was when it showed up to Gainesville Florida at the oaks Mall. I will see if I can get out there I just can't guarantee it.
Looking GREAT!!! You may consider some sort of "shade" strip under the light bar to dissipate any resulting windshield glare if you ever plan on driving with it turned on.
That location is going to cause a lot of reflection on the windshield.
and you're in FL today per Dale
Just arrived and moving back into Navi.
Rest in Peace Amen
BRIGHT
Nice work 👌Wish I had you youngins to work on mine 🧓 ☮️
Hey, Mike. I love your channel! I was just watching one of your older videos and wondered what has happened to your friend Luke.
Watched Dale's video yesterday. Sorry to here about your back. My you know what was puckered this whole video not wanting to see it. Glad I didn't. Hope you are getting better and get to Florida soon.
Thanks, this week has been rough but, we will keep moving! I just arrived at dales this morning! He will be in the next video.
Mike, why did you install the Maxfan before painting the roof?
The roof metal under the fan is safe from rust and primed. I will be painting the roof with the silicone rv sealant later with jeet. Then lap sealant over the max fann seams and screws.
I could have done it before installing the fan but we cant really paint in the barn with the temps this winter so it will all get painted once we see 50 degrees on the weather forecast.
✌️😁👍
I miss watching your build’s please don’t leave already lost numberjuanbus
Love the video and Jeet's jokes. What wire are you using? Is it a multi-strand? Thanks
It is 14ga 2 marine wire wrapped in a UV oil resistant coating. I will add a link once I get back to my computer.
@@navigationnowhere Thanks Mike
“Jeet-in-the-box” just crank the handle 😅😅
So should it be mentioned that you used blind rivets? Also, did you use Sikaflex for sealant on roof or another brand/type? Always enjoy your videos
Do you use primer paint on the bus before you paint? And what kind of paint do you use? I like flat finish. Thanks 😊
Everything going ok?
Peek a Jeet...Buhahahah
You stopped making videos??? I like your videos. I pray you're ok.😢
Everything is okay. I have a video going very soon
Probably won't like the light bar in that spot. Because when in the van driving and flip it on. It's going to have a lot of glare on the windshield. No good
How does one sign up to build out their bus at this workshop or where is the best skoolie build sites near ohio?
Anyone from the NE USA that wants to know how they can do vacation/van/bus life and have a sustainable income without convincing someone to buy something. I'll share what I'm doing.
Last four people who stopped by the shop:
1)software engineers - fully remote
2)crane operator - scheduled 8 months out of the year, travels 4 months
3) graphic designer - fully remote
4) general construction - works contracts and moves on to new location.
@@navigationnowhere i love to see the hugely diverse way that people are able to incorporate their livelihood into their travel lifestyle.
since the hatch panels are permanent i dont understand why you wouldnt weld them instead of all the drilling/riveting and caulking... welding would eliminate all the xtra steps and water proof at the same time. i could understand it better if you didnt have a welder/didnt know how to weld at all, but clearly not the case since you weld things all the time.
Everything takes 1000 minutes 😂
Are you ever going to get out on the road and enjoy some Travels???
STOP BEING A WORKAHOLIC!!!
LET YOUR FRIENDS DO THEIR OWN BUSES!!!!
IF THEY NEED SOME ADVICE....HELP THEM...BUT STOP DOING THEIR WORK FOR THEM !!!!!!!!
GET OUT AND travel!!!!!