Це відео не доступне.
Перепрошуємо.
How to Replace Wheel Hub & Bearing 2010-2013 Ford Transit Connect 2.0L
Вставка
- Опубліковано 30 бер 2023
- Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a wheel hub & bearing on your 2010-2013 Ford Transit Connect 2.0L. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2010 Ford Transit Connect
2011 Ford Transit Connect
2012 Ford Transit Connect
2013 Ford Transit Connect
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa3y/1A...
• Pry Bar 1aau.to/oIN/1AX...
• 15mm Socket 1aau.to/oa4j/1A...
• 19mm Socket 1aau.to/o2B/1AX...
• 24mm Socket
• 32mm Socket 1aau.to/obS/1AA...
• 8mm Deep Socket
• Brake Caliper Hanger 1aau.to/ofk/1AX...
• Press
• Snap Ring Pliers
• Wire Cutters
• Torque Wrench 1aau.to/oamN/1A...
• Copper Anti-Seize
• Rust Penetrant
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Love how instructional vids show procedures problem free ( separating lower arm from knuckle is frequently rust welded and usually require extra work)
Uausally have excellent videos and this one was up to standards,.right up to the part you tell us to simply hand tighten the axle nut then proceed to drive down the road!? Torque spec for everything BUT the most important fastener??? The weird noise we'll hear is from driving with a hand tightened axle nut!! Should probably add that information to the description or edit it in. Dropped the ball there...
The fact the axle nut wasn't shown being tightened mentioned. Otherwise this guy really is fascinating to watch. Great hands and the point for effect a very good visual queue. The video assumes a person has advanced intermediate mechanical skills as well as equipment like the press to do the job so much of the rudimentary explanation not necessary.
axle nut torque 207 foot pounds, wheel in the air, put a screw driver in the brake disc to stop the axle turning while torquing, just did mine today
Great video. Short and to the point
why don't you tell us what torque wrench setting is for the hub nut before we drive down the road so we can tighten it correctly ??
The SKF book says 59 ft Lbs and then 90 degrees with a oem new nut.
Axle nut just tighten by hand , got it 😂, why do you need alignment
What the torque for axle nut
I thought about doing this myself until I watched the video😅
How the hell do u hand press the strut on onto the wheel hub assembly on reinstallation? That’s just ridiculous. It took me 10 minutes of hammering to get the stupid assembly off. You trying to tell me you just pushed it up there? I call shenanigans on that BS.