Quick tip on calibrating steering angle sensor

Im showing how easy is to calibrate a clock spring and so many dont do it and end up ruining a new part
Volvo Parts store and much more
HTTP://www.volvoprojec...

[@6andrew2]

My dealer wanted £1,000 to replace and calibrate device. Thank you very much.

[@2605155]

Wow, this is what it looks like when 30 seconds of data is slowed down to 5 minutes and 17 seconds. I didn't think he was going to make it through.

[@TIMMEH19991]

poor guy only has one hand ;)

[@obabobai]

Then don’t watch it knob

[@Miniorpernik]

It comes with a screw at the back when u get it new.it is pretty much spot on centred hence the screw so u dont twist it about

[@dogmaw1364]

Thank you, you don’t know how hard it it trying to find info on how to calibrate these. Thank you

[@biggbidnezz5165]

Hey, thanks for that video. This information is exactly what I was looking for. You're awesome for doing this~!!!

[@TFizzy762]

Thank you for this!

[@marketbuy]

If buying brand new, why need to calibrate? It’s already set in place with a screw.

[@marketbuy]

I have an 08 XC90. How does one know if it’s the clockspring or the yaw rate sensor that needs to be replaced? Is there a particular code? Thank you

[@kordianstaniszewski6414]

Does it need software upgrade after installation? What if you replace it with a used one? I have a internal failure on my SAS on a 2003 XC90. DSCT won't work.

[@Airduct_ltd]

no

[@sonkeiimports]

Really helpful video, but please get a phone mount lol. Its hard to keep track spinning it with 1 hand!

[@salesau2206]

Hi. Pretty sure i have calibrated the new angle sensor and fitted correctly. Would i still need to scan to remove the anti skid message?

[@mickeymaurer2911]

SalesAU * Just drive the car, and after a short time. The code will disappear.

[@jeromequesnelle4797]

Good start .. sort of ... keep looking better info out there. Still give a like for trying.

[@marchennis351]

Could you please tell me what other sensor you did mention what could cause the "anti skid" message?

[@behindthebuild9498]

Marc Hennis it’s called the yaw sensor or something like that

[@LucasEdinburgh]

What is the other sensor you said?

[@geoffreygcotton]

Please use two hands many thanks

[@silkSatinBoxers4eva]

Can I only use a Volvo scanner? I need a cheap one??

[@callumbaker3957]

Hi,
Is it possible to take the wires out of the squib?

[@peterjoseph2803]

☆☆☆☆☆

[@JNavas2]

Get a NEW one, NOT a used one, from FCP Euro. It will come ready to install. See ua-cam.com/video/Oc-RIK8rdzI/v-deo.html

[@AlexandruDragoescu]

WTF is this?

[@addiwhyyoubooted7909]

Alexandru Dragoescu the most helpful video