I wish you have covered a shot on how the spreader adjuster is placed in, which groove are on the outside or inside. Anyhow this clip is better than other clips online, Very helpful.
Thank for a very nice reaction on the video! Your idea is very good and I'll do that next time I change the brake shoe. Again thank you for watching and have good day ahead.
@@lologroovydiy I strongly encourage you to do more because you have seem to oultine things and not a live gungho clips. Even little ideas can make a great vids. Ciao
Here's a trick I use. The Allen Wrench Head Screw you used for removing the Drum was effective but tedious using a simple Allen Wrench. I take an old set of Allen Wrenches or buy another set just for this purpose. They're not that expensive. Cut the L off of the end and put it in your drill. This is way faster when working with Allen Head Screws.
Thank you for posting this video , I've learned for sure, however, one thing I noticed, you did NOT show how to disassembly/removed the Self-adjuster part on the video and when you 're putting the parts together , you've shown how to re-install / assembly the Self adjuster part.
Thank you for watching. You have such a good eye details. I didn't have a good video on one side so I took a shot on the other side. Stay cnnected and enjoy the day!
@@lologroovydiy ok so should be the exact same. I’ve watched over a few times and I just ordered brake drums shoes and All the hardware. I’m gonna watch this video a few more times and also while I do the job. I’ll lyk how it goes thanks for posting this video
The good thing about the drum brake is that it is self adjusting. Once you step on the brake pedal it will adjust the correct distance of the pads. Thank you for watching and have a wonderful day ahead.
Excellent camera work! Thank you.
Excellent job Sr. Thanks for video and tips
Thank you so much for watching!
Great camera angles and explanations. Thank you
Thank you for the great comment. Keep safe and have a wonderful day ahead.
Best video. Thank you!
Thank you so much for spending time watching. Have a wonderful day ahead!
About to do this. Why is every other viddy on UA-cam about this procedure at *least* a half hour long. Very well done. No wasted shots.
Thank you for watching and enjoy working on your project!
Thanks for sharing!
NOT SKIPPING OF ADS
salamat sa mga pagtuturo kailangan alam nito para hindi na kailangan ipagawa pa pag magkaroon ng problema.full watched.
Maraming salamat sa pagbisita! Stay healthy at safe... God bless!
Ang galing niyo talaga sir,,,kaya niyong magpalit ng brake drum ng sasakyan salute to you Kapatid
Salamat sa laging pag daan! God bless!
Thanks for sharing, nice, stay connected. Regards always.
Salamat sa pagbisita at stay cnnected lagi tayo! God bless!
Très bon vidéo,Good vidéo, merci thank
Thanks for watching!
Sweet and to the point lovely
Thank you for watching. Have a good one!
Ang galing naman po nyo ang daming alam pagdating sasakyan thanks for sharing po
Maraming salamat ulit ng marami sa inyong pagbisita! God bless!
Nice work
Thanks so much!
Hi lolo. Great job. Keep safe po. New friend here
Maraming salamat sa pagbisita at kayo din stay safe and conncted! God bless!
Thanks for sharing sir,,stay safe po.
Maraming salamat sa pagbisita God bless!
Thank you!
Thank you too for watching. Have a wonderful day ahead.
Talented talaga si lolo groovy tv 👏👏👏
Naku maraming salamat! God bless!
Nice video!!!!
Thank you so much for watching!
Good video!!
Thanks a lot!
I wish you have covered a shot on how the spreader adjuster is placed in, which groove are on the outside or inside. Anyhow this clip is better than other clips online, Very helpful.
Thank for a very nice reaction on the video! Your idea is very good and I'll do that next time I change the brake shoe. Again thank you for watching and have good day ahead.
@@lologroovydiy I strongly encourage you to do more because you have seem to oultine things and not a live gungho clips. Even little ideas can make a great vids. Ciao
@@sanBastian123 thank you so much for the encouragement. Stay well and have a good one!
Well explained
Thank you and have a wonderful day ahead.
Toyota corolla replacement ayos lolo idol more power po kapatid c'u idol
Good job lolo Groovy mabuti kapa na kaya mo gawin ang ganyan bro
Pa tsamba tsamba lang hehe! Salamat sa pagbisita God bless!
Prerequisite to making repairs such as this one: you gotta have strong wrists! Thanks for the video, lolo!
Thank you for watching and have a wonderful day ahead.
Thanks for the tutorial Tol kapit bahay from Dubai keep safe po
Maraming salamat sa pagbisita! Stay cnnected God bless!
Here's a trick I use. The Allen Wrench Head Screw you used for removing the Drum was effective but tedious using a simple Allen Wrench. I take an old set of Allen Wrenches or buy another set just for this purpose. They're not that expensive. Cut the L off of the end and put it in your drill. This is way faster when working with Allen Head Screws.
Your idea will make the job faster and I will adopt it on my next project! Thank you for watching and have a wonderful day ahead.
How about using two screws wt a 13mm head!
Great video. Thank you. Anyone know the size of the screw to take off the drum?
The tread size is 8mm×1.25 COARSE. Thank you for watching and have a wonderful day ahead.
@@lologroovydiy Thank you... you also.
Very excellent question. I had to mess around with a whole bunch of different screws I had stashed in my garage before I finally got it lol
Ang galing niyo naman po Lolo
Maraming salamat ulit sa pagbisita! God bless!
Salamt sa Pag share ng inyong knowledge sa Pag repair ng sasakyan. Keep blogging po. Hope to watch more videos. caninoca
Maraming salamat at always stay healthy and safe! God bless!
tamang tama yan lolo groovy may sasakyan ako d nmn ak marunong nang mga ganan kailangan ko padalahin sa talyer
Madali lang nakakalito lang sa umpisa! Salamat sa pagbisita God bless!
Thank you for posting this video , I've learned for sure, however, one thing I noticed, you did NOT show how to disassembly/removed the Self-adjuster part on the video and when you 're putting the parts together , you've shown how to re-install / assembly the Self adjuster part.
Thank you for watching and I'll keep that in mind next time I work on the rear brakes. Have a wonderful day ahead!
Your spring was left to right now u put right to left on top May b it’s same thing but u changed 😊
Thank you for watching. You have such a good eye details. I didn't have a good video on one side so I took a shot on the other side. Stay cnnected and enjoy the day!
Woow galing nman hirap din mg ayos lolo
Salamat ulit sa pagbisita God bless!
How long did this take total hrs?
Around 2-3 hours. Thanks for watching!
What year corolla is this. Mine is 2005 is it the same?
It's a 2006 Corolla S. Thank you for watching and have a good day ahead!
@@lologroovydiy ok so should be the exact same. I’ve watched over a few times and I just ordered brake drums shoes and All the hardware. I’m gonna watch this video a few more times and also while I do the job. I’ll lyk how it goes thanks for posting this video
@@Friday12321good luck and have fun on your project!
@@lologroovydiy I will thank you. I’m just really hoping I don’t put it together the wrong way
You skipped the most important reason i watched this video! You didnt even adjust them! I bet it didnt stop!
The good thing about the drum brake is that it is self adjusting. Once you step on the brake pedal it will adjust the correct distance of the pads. Thank you for watching and have a wonderful day ahead.
Tmsk agd
Salamat ulit sa pagbisita! God bless!
Decent instructions but the music is needless and more than irritating!
Thank you for your observation and I will take note of this on my next video. Have a wonderful day ahead!
I cant stand toyota for this mechanism im like y they could just did disk brakes simple smh