Tennant M20 Training Video

Поділитися
Вставка
  • Опубліковано 12 гру 2024

КОМЕНТАРІ • 25

  • @judithlewis8597
    @judithlewis8597 6 років тому +3

    What may cause water to come out while turning a corner or while cleaning the floor from the side.

    • @jacobdingledine5506
      @jacobdingledine5506 4 роки тому +1

      Replace yer squeegees

    • @robertocervantes2098
      @robertocervantes2098 3 роки тому +2

      Shutting of the water before u turn will eliminate that problem

    • @carlwaltens424
      @carlwaltens424 2 роки тому +1

      U can also adjust the squeegee deflection.(up or down,pressure upon surface or substrate.
      A size 17 wrench,clockwise or counter clockwise on bolt assembled to frame and squeegee assembly plate to reduce or increase squeegees impact upon surface.
      Also, can,or might have to adjust the two squeegee deflection knobs,clock or counter clockwise to adjust the deflection on the far or outer left and right edges of squeegee.
      Also check your vac hose and metal housing above squeegee for any obstructions..

    • @silverlion2378
      @silverlion2378 Рік тому +1

      Need to release debris from suction square in the back

  • @gwthobart6728
    @gwthobart6728 2 роки тому

    AFTER DUMPING THE DUST DIRT, WHY THEN WHEN USING THE MACHINE DOES IT SEND DUST THRU THE AIR IS THERE A FILTER MISSING ?

  • @JohnYegres-ii8ts
    @JohnYegres-ii8ts 11 місяців тому +1

    Donde estan ubicados ?

  • @robertocervantes2098
    @robertocervantes2098 3 роки тому +1

    I only got trained for a day and the drivers got laid off so know I leave the floors worst than they were to begin with.

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  3 роки тому

      Hopefully this video helped! If you'd like a PDF of the Operator's Manual, feel free to reach out to us at service@southeasternequipment.net

  • @rejanegerlack4672
    @rejanegerlack4672 Рік тому

    preciso do video em Portugues tem como traduzir?

  • @patrick19761976ify
    @patrick19761976ify 2 роки тому

    I have trojan batteries in my T2. Pain in the ass to keep filled properly. Charges sometimes, others, not

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  2 роки тому

      You can always upgrade to AGM, or install a battery watering system. Either one would make your life a little easier! Give us a call at 803-252-0100 or email for more information.

  • @omegahtv6779
    @omegahtv6779 7 років тому +1

    How do you empty the hopper?

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  7 років тому +1

      It is quite easy since it is has automatic dumping. The detailed instructions are found on page 52 of the owners manual: www.southeasternequipment.net/v/vspfiles/downloadables/PM/TN/M20%20Gas%20LPG%20English%20Operator%20Manual%20%28SN%201000-%20%29.pdf

  • @jerrystallworth2490
    @jerrystallworth2490 4 роки тому

    Turn key to on it does not crank

    • @SoutheasternEquipmentSupplyInc
      @SoutheasternEquipmentSupplyInc  4 роки тому

      Refer to page 38 on Starting the Machine and page 68 for Troubleshooting in the Owner's Manual: bit.ly/2WS69mC If you still need assistance, please email us at Service@SoutheasternEquipment.net Thank you!

    • @angelinaxo1469
      @angelinaxo1469 2 роки тому

      any luck? having same issue

  • @ILIK3HATERZ
    @ILIK3HATERZ 4 роки тому

    The voice over sounds like JaboodyDubs

  • @SydneyDrums
    @SydneyDrums 3 роки тому +1

    It’s not that hard ... this video is so overcomplicated