DTF (Direct To Film) transfer on 100% nylon
Вставка
- Опубліковано 6 вер 2024
- #Directtofilm #dtf #howto #transfer
In this video I will show you how I pressed a DTF (direct to film) transfer onto a 100% Nylon jacket. I had my heat press set at 300 degrees and pressed the transfer for 15 seconds. After I pressed it I realize I could have had less heat or pressed the transfer for less time. But none the less it worked.
If you want to send me products to review and test in future videos please email me at berrprintz@gmail.com
Social media: @ berrprintz
Instagram
Facebook
Clubhouse
Shop with berrprintz :
www.etsy.com/s....
-------------------------------------------------
I appreciate you watching please subscribe, comment, and like the video
Feel free to ask any questions or give any tips/advice of you see something I can do better
Make sure to join the Facebook group #squad : / 2777727. .
#dtf #dtfprinting #heatpress #nylon
![How to Apply Our Hot Peel DTF Transfers w/ Your Heat Press 2022 [UPDATED] + Tips & Tricks](http://i.ytimg.com/vi/c2IqUIlHmXE/mqdefault.jpg)
![How to Apply Our Hot Peel DTF Transfers w/ Your Heat Press 2022 [UPDATED] + Tips & Tricks](/img/tr.png)
a year later and this video is still valid .... this was what I needed to see today !!! Thanks .. I'm now subscribed
Appreciate you Glad this video was helpful.thanks for subscribing
Dynamite work! Super helpful 🙏
Appreciate you checking me out
Man ima go for it! Thank you for the video brother !
Aye you gotta do it. Thanks for checking me out
Big respect man always appreciate the knowledge man, take risks create new opportunities love it man!
Much appreciated 🙌🏾. Thanks for taking to time to check me out
I definitely needed this video today, wasn’t even lookin for it 💯💯💯💪🏾💪🏾 great info, Thank You
Thanks I appreciate you checking me out
valuable info man! Thank you!
Thanks for watching 🙌🏾🙌🏾
Great video bruddah! You only going up from here big dawg. 💯 thanks for sharing.
🙌🏾🙌🏾🙌🏾 appreciate you taking the time to watch it. Bless up
@@Berrprintz 🤙🏼🤙🏼🤙🏼
Great job looks good👍🏽
Appreciate you
great video brother - did you notice any adhesive squishing out around the edges of the transfers at all? also, do you recommend a finishing press with your DTF?
Yeah I did around the edges. I would actually press at a lower Heat next time. And yeah you can do a second press if your Heat is right
Appreciate you watching
@@Berrprintz WHAT IS THE PERFECT TEMPERATURE FOR NYLON?
thanck you bro ...
If get powder just press again it came out 🔥
Appreciate you
@@Berrprintz keep grinding
My g! Update video please because my dtf on nylon coach jacket after a few washes, it came out in pieces
Man honestly I sold this jacket or maybe even gave it away but I didn’t hear nothing back about it. What temp are you pressing them at and are you printing the transfers yourself I was printing dtf when I dropped this video and it’s all about getting your cure on point because a couple of shirts I made ended up cracking after a wash or two but I’ve just been buying transfers now and they been all good so far
@@Berrprintz same here! i design my stuff and buy my transfers from someone else. i print them around 300 degrees for 15 seconds then i stretch and cool down and then press 15 seconds again. i got printing on cotton shirts down but i was super intrigued by your windbreaker because i printed on an old windbreaker and it cracked in one wash hahaha. thanks for replying bro
👏🏾👏🏾👏🏾 trendsetter
Appreciate you
🔥
Appreciate you bro
FIRE CHICO. … 💯💯💯
Appreciate you 🙌🏾🙌🏾🙌🏾
Did it stay on after wash?..
I never heard back from the person who bought it. But I suggested they wash cold and hang dry
that's heat
What ink did you use and how did you install it in printer?
I used in from big boi prints he has a page on here. And I installed it just by putting the cartridges in with the DTF ink
Advice. Less talking just get to it