Wow!!! Brian you have come a long way in a short time. Kuddos my Friend 👍👍 this project looks great. Thanks for sharing your thoughts and videos Rodney
Great storage idea!!! If you put together a kit with instructions etc folks would buy it! Also, you could sell the plans and folks would purchase those as well! love your channel.
From one woodworker to another that's an awesome gig... i haver really though about selling things like that but I'll give it a shot and see how it goes.... also DON'T throw away the saw dust make little bags of different weights and post them on fb market place as "wood flour" you'd be amazed at how many people are looking for things like that and if you have a local woodworking tool you might end up selling your left over scrap wood they'll buy it
If you painted them in Milwaukee and Dewalt colors you could probly double your asking price. Hell maybe even go big and get a 50 pack of the 3m stickers for both brands and slap on on the top half dead nuts center... nice work man.. I love building stuff as well.
I’m still subscribed. U r back to your old self and why I subscribed. Gettin our of the drama ( even though I see your side and agree to lots of it) but I’m not watching UA-cam for my reality tv drama. This is a great channel and this vid is your best. Can’t wait fir picnic tables and Adirondack chair. Thx. Great job. We all support u!!
I’m assuming by now you’re batching out the cuts? After you said you make 3 in 8 hours I was trying to figure out what was chewing up all your time and then I saw you measuring and marking for cuts on the miter saw. I hope by now you have T-track & stops setup with a permanent tape measure on the fence?
I liked the Adirondack chairs. The tool storage is nicely thought out. It's so humid in my shop that I have to keep all tools that have a value in a closed space, like a drawer. Just oiled my gage blocks and pin gages to keep them from rusting. Not exactly my favorite part of living here.
Instead of using the jig saw to cut, use your table saw. Cut just enough so there's maybe a 1/8 left. Then put that piece of wood 8n your clamp and use a hand saw or hammer or sheet rock saw to finish. It might be faster, it might not.
You can go " knock down" and let the customer assemble. Not sure I would want to go that " customer assemble" way. Besides if this is keeping you busy, why worry about it. You need to charge more.
From what I’ve heard, if you sell with eBay you pay them a very small charge .$0.99 and you Have included the eBay money back guarantee for the buyer. Don’t quote tho boi cause I ain’t said shhhh,,, heh jk but really tho I heard but have not confirmed
![Wall Mounted Tools Storage with Charger [Woodworks]](/img/n.gif)
Do you have any side hustle ideas that you do to earn any extra cash?
More UA-cam videos lol
Detailing and offerup sales
No. Need help
yes, installing antennas to help my customer's cut the cord. at $225 each.
Flags. All kinds of wooden flags seem to be a hot seller. I would like to know what style you have if any.
Would love to see a video where it’s done with just a circular saw and a drill. A true DIY approach for people just starting out would be very helpful
Watching this at 0230 and now im inspired to start this project! Crazy how life works sometimes
Beautiful work. I’m making one for myself. Thanks
Great idea...I was thinking of making one of these for myself, but why not build 2 at a time and sell one!
holy crap, you have grown a lot, that's a lot of stuff you've been able to acquire/build.
That’s crazy! I am also a mechanic turned woodworker lol just made a similar one of these for my “she-shed” and was thinking I could sell these!
Wow!!! Brian you have come a long way in a short time. Kuddos my Friend 👍👍 this project looks great. Thanks for sharing your thoughts and videos Rodney
I wish you were near Daytona Beach, FL. I'd buy one.
Outstanding idea! Thanks.
Great storage idea!!! If you put together a kit with instructions etc folks would buy it! Also, you could sell the plans and folks would purchase those as well! love your channel.
Great side hustle. I may have to look into that.
Awesome video brother and that is an awesome idea! Thanks for sharing and making these videos I appreciate you.
Keep doing you brother !
Thank you for the video
Thank you so much brother!!’
Creative & awesome job! Luv the content & keep the music in the mix. Peace brother
Yo bro....🏁
Awesome brotha... looks badass...
Stain em and apply a nice varnish.and double the price....
What is goin on brother? Hope all is well and everyone is safe.
That came out great. I need to make one someday.
Great job. Great video. You have a new subscriber. I need one of these first then I might make to sell. Thank you.
Great video! Great idea! Thank you for sharing.
Thanks brother. I like the project. I'll build me one.
Respect + brother!
In going to Build one, thank you!
Nice shop 👍
great video brother you just gained another SUB from me first of many videos I will watch of yours.
Good stuff subscribed
What if you just made the cuts, included the screws ect, and sold/shipped as a kit. I think shipping would be much cheaper. Just a thought.
How much do you sell them for ...great video from 🇨🇦 nova scotia ....thanks for time you put in to video and work ....
From one woodworker to another that's an awesome gig... i haver really though about selling things like that but I'll give it a shot and see how it goes.... also DON'T throw away the saw dust make little bags of different weights and post them on fb market place as "wood flour" you'd be amazed at how many people are looking for things like that and if you have a local woodworking tool you might end up selling your left over scrap wood they'll buy it
How do you hang these? Will the plywood be strong enough?
Nice work may have to hit you up for one since you are local to me
How do I get the blue print for the tool holder
Hi, just a thought what if you hook your dust tube up on the ceiling or overhead this should give you some freedom with the sanding
If you painted them in Milwaukee and Dewalt colors you could probly double your asking price. Hell maybe even go big and get a 50 pack of the 3m stickers for both brands and slap on on the top half dead nuts center... nice work man.. I love building stuff as well.
I’m still subscribed. U r back to your old self and why I subscribed. Gettin our of the drama ( even though I see your side and agree to lots of it) but I’m not watching UA-cam for my reality tv drama. This is a great channel and this vid is your best. Can’t wait fir picnic tables and Adirondack chair. Thx. Great job. We all support u!!
I’m assuming by now you’re batching out the cuts? After you said you make 3 in 8 hours I was trying to figure out what was chewing up all your time and then I saw you measuring and marking for cuts on the miter saw. I hope by now you have T-track & stops setup with a permanent tape measure on the fence?
I'm just trying to build my own. Wondering though, do you still do this as a side hustle? Plywood price is $$$$$$$
I liked the Adirondack chairs. The tool storage is nicely thought out. It's so humid in my shop that I have to keep all tools that have a value in a closed space, like a drawer. Just oiled my gage blocks and pin gages to keep them from rusting. Not exactly my favorite part of living here.
What are the measurements to build it
Thats pretty fucking cool Brian
You mentioned tool reviews, do you get free tools doing that? I just dove into woodworking also and I am very short on the tools
Around 5:30 where the actual woodworking starts.
Where do I order mine from? GET IT OLE SON!
What size Forstner bit?
Good video. Where did you get the apron?
Where did you get the little storage bins at?? I been needing some for my shop
Where do you live
Instead of using the jig saw to cut, use your table saw. Cut just enough so there's maybe a 1/8 left. Then put that piece of wood 8n your clamp and use a hand saw or hammer or sheet rock saw to finish. It might be faster, it might not.
Sandy my plywood destroys the face. U are using pine here, right?
Hey, are you located in Georgia?
In Ohio buddy
you need to start wearing safety glasses!
You can go " knock down" and let the customer assemble. Not sure I would want to go that " customer assemble" way. Besides if this is keeping you busy, why worry about it. You need to charge more.
Just be careful not to spend the hustle cash earned to the hospital 10:27
Holy chit first 6 minutes are useless if your here just for ideas
20 dollars?! To make a no way the sheets of plywood are at least 50$ even in the big box stores
Oh I don’t have many tools smh
From what I’ve heard, if you sell with eBay you pay them a very small charge .$0.99 and you Have included the eBay money back guarantee for the buyer. Don’t quote tho boi cause I ain’t said shhhh,,, heh jk but really tho I heard but have not confirmed
terrible focus dude