I tried it , it doesn't work. The problem is the blade that bends when it is hot. Using water is even worst because you lose the control of the machine.
Hello, thanks a lot for your feedback. We are very sorry to hear you’re having issues using our product. For obvious reasons, the design all of our products is severely tested before deciding to start production and sales. BC45 is no exception. Therefore, we can assure that BC45 proved to be an effective and reliable tool. We did test it on multiple porcelain tiles and slabs. So far, also the feedback from many professionals had been positive. We however perfectly understand that this doesn’t solve your problem, which from what you said looks like it comes from the diamond disc. Being the BC45 a manual tool, it is fundamental that the speed of cut is proportionated to the hardness of the tile you cut. We all know that not all porcelain tiles are the same. If disc is too much stressed (speed of cut too fast) it gets too hot and consequently it bends. If it bends a proper 45° miter-cut can’t be achieved. Furthermore, it is important having the diamond disc in good conditions. About the use of the BC45 with water (which for sure helps a lot to cool the disc down and therefore obtaining better performances and results - not to mention the fact you don’t breathe dust) it also has been tested with positive results. Therefore we would be very interested in better understanding what is creating you problems. So, please, we would be glad to co-operate with so to help you sorting the problem out. We would much appreciate if you can write a message at our mail info@raimondispa.com. Thanks again for your feedback and we really hope you will contact us soon.
I completely disagree. THIS TOOL WORKS GREAT! How do you lose control of the machine while using water? Makes zero sense. Using water keeps the dust down, blade cool and a smoother cut. Its a great tool to use for your 45 degree cuts. Raimondi is the best!!
@@casedonn6213 I respect you personal opinion. Many tilers that I know don't like this machine either. I'm sure that Raimondi will improve it soon. Raimondi overall is a good company.
I've used this machine for some time now, and it works great. I don't understand your statement that 'using water makes you lose control of the machine', is precisely the water what keeps the blade cooled down and prevents it from overheating and potentially bending.
You most likely have been using dull or low quality and eventually too thin grinder blade or were pushing it with too much force to speed up the process (which unfortunately is quite slow in comparison to some track saw with larger blade diameter)
Awesome tool!!! ❤❤❤❤
Cuál es el precio en México??
Can you use a 45° profile blade on this ?
hello, how do i buy this machine?
Como hago para comprar esa maquina soy d peru
How can I get it I'm in Egypt
Buenas noches como ago para octener esa herramienta espero respuesta vivo en Bogotá Colombia 🇨🇴
Hello and thank you for your comment, please send us an email to info@raimondispa.com Thank you!
Where can this be purchased online in the US?
please send us an email so that we can help you info@raimondispa.com
how much is it
Un altro mio interesse.
Please purchase details information in india
Please send us an email and we will help you! info@raimondispa.com Thank you.
Top
يوجد شحن إلى العراق
Ok
I tried it , it doesn't work. The problem is the blade that bends when it is hot. Using water is even worst because you lose the control of the machine.
Hello, thanks a lot for your feedback. We are very sorry to hear you’re having issues using our product.
For obvious reasons, the design all of our products is severely tested before deciding to start production and sales. BC45 is no exception.
Therefore, we can assure that BC45 proved to be an effective and reliable tool. We did test it on multiple porcelain tiles and slabs.
So far, also the feedback from many professionals had been positive.
We however perfectly understand that this doesn’t solve your problem, which from what you said looks like it comes from the diamond disc.
Being the BC45 a manual tool, it is fundamental that the speed of cut is proportionated to the hardness of the tile you cut. We all know that not all porcelain tiles are the same. If disc is too much stressed (speed of cut too fast) it gets too hot and consequently it bends. If it bends a proper 45° miter-cut can’t be achieved.
Furthermore, it is important having the diamond disc in good conditions.
About the use of the BC45 with water (which for sure helps a lot to cool the disc down and therefore obtaining better performances and results - not to mention the fact you don’t breathe dust) it also has been tested with positive results. Therefore we would be very interested in better understanding what is creating you problems.
So, please, we would be glad to co-operate with so to help you sorting the problem out. We would much appreciate if you can write a message at our mail info@raimondispa.com.
Thanks again for your feedback and we really hope you will contact us soon.
I completely disagree. THIS TOOL WORKS GREAT! How do you lose control of the machine while using water? Makes zero sense.
Using water keeps the dust down, blade cool and a smoother cut. Its a great tool to use for your 45 degree cuts. Raimondi is the best!!
@@casedonn6213 I respect you personal opinion. Many tilers that I know don't like this machine either. I'm sure that Raimondi will improve it soon. Raimondi overall is a good company.
I've used this machine for some time now, and it works great. I don't understand your statement that 'using water makes you lose control of the machine', is precisely the water what keeps the blade cooled down and prevents it from overheating and potentially bending.
You most likely have been using dull or low quality and eventually too thin grinder blade or were pushing it with too much force to speed up the process (which unfortunately is quite slow in comparison to some track saw with larger blade diameter)