hi,my remote is 315mhz and i buy a new remote 433mhz..The copying is succeed but when to use to my car alarm its nothing happen so my question is..can it work to copy from 315mhz to 433mhz? or it must in the same frequency? PLss help
Hello, do you insist on using the black remote? I'm wondering if the brown one www.aliexpress.com/store/product/433Mhz-Wireless-RF-Switch-DC12V-Relay-Receiver-Module-and-433-92-Mhz-Remote-Controls-For-DC/2138259_32849723010.html?spm=2114.12010615.8148356.23.3cbd440ac56WwL is alright? If you insist on using the black one, we can give you the black module. Just note it to us during your purchase.
Hello, when you copy the remote control, please try to keep the remote control as close as possible. Press the AB buttons together until the indicator light flashes, then copy with the remote control as close as possible
Hi, I follow the erasing procedure as on the video but after pressing three times on the A button the other buttons still show a light after pressing them. Can anyone help?
You might have mistakenly restored the erased code, try and erase the code again. Be careful not to press the c & d button at the same time, it restores the code.
Hello, you can purchase them from www.aliexpress.com/item/433-92-Mhz-Duplicator-Copy-CAME-remote-control-TOP-432EV-TOP-432NA-TOP432NA-With-Battery-For/32687574582.html
Hi, that's isn't one of our store. So, we are not sure if there remote control are the same. You can purchase here www.aliexpress.com/item/433-92-Mhz-Duplicator-Copy-CAME-remote-control-TOP-432EV-TOP-432NA-TOP432NA-With-Battery-For/32687574582.html Under the description on the page, there is a detailed guide about how to clone and clean the remote control.
I am happy to answer your question. Here I need to explain a basic doubt to you. The distance of remote control is related to two factors. That is, the transmitting remote control and the receiving controller. If both are good, the distance is very far. If one is poor, the distance will be affected. Therefore, I can't answer your question accurately because I don't know how your receiving controller is. I can only provide our data for your reference. If you use our receiving controller, it can reach 100 meters in an open space; in a general office environment, it is also about 50 meters. I hope to solve your problem and look forward to follow-up feedback.
Did the procedure some 37 times (!). But what happens is that the new remote takes over the code (so it works), but the original one looses it code. Don't know how to solve this.
Wow, why did your original remote control fail? Please tell me what the failure phenomenon is? If you are using our copy remote control, then our remote control will not interfere with the original remote control! There are two basic points to understand when choosing a copy remote control 1. Is it the same frequency? Our frequency is 433MHz 2. Is it a coding format that can be copied? We are compatible with most of them, but some rolling codes need to be customized Looking forward to your reply and hope to help you
@@qiachip Yes, both original remotes don't work anymore. I purchased 2 of your remotes previously (call them A and B), those are programmed with the original remotes. then, I purchased an extra remote (call it C) Tried to program remote C with remote A and with remote B. What happens is over and over again, is the following 2 situations: - After resetting the new remote, when trying to program, the new remote gives 3 light flasehes (2 times), and it its not programmed. or - After resetting the new remote, when trying to program, the new remote gives many very quick flashes, resulting in that it is programmed. But the remote A (or B) as source, looses it's functionality. My original remotes (delivered with the door opener) are indeed 433 MHz. Coding format can be copied I am totally puzzled
Good news!Amazon’s new products are on sale for a limited time, Discount Details: 20% off on $0 + 30% off on $69+ Coupon: RODOT2021 Valid until Feb 31th, 2021 Available for RODOT site-wide items. www.amazon.com/RODOT-Wireless.../dp/B08VDCP1JY To give the product as a gift, please email daisy@rodotdiy.com
Thank you! Spent 20 mins trying to do it via their instructions. Came here, saw your video, did it first go after that. Nice one.
Thank you, very helpfull your video is excelent
Excellent. Thanks a lot Bro. Paired successfully..
Ha funcionado. Muchas gracias.
Thank you for sharing, I didn't catch the erasing procedure before. Now my clones are well working.
Thank you
Dony work
Very helpfull! Thanks!
Brilliant video, worked first time with your help. TY
Merci beaucoup 😊
I have already a A and B in my remote how can I now add a C and D without erasing A or B function?
Finally a video that showed me how to do it. Thank you very much.
Excelent thank you!!
many thanks.... i search longtime for code my new remote...your video it s perfect...
Thank you! Follow qiachip facebook if you want more information, thanks!
Hi, information to set the black one? it's important, thanks
Does red light and blue light indicator differs ?
Thank you this helped me as well. The website wrote wrong instructions and i wasnt able to program. But after watching this vola....
THX!!!
THANK YOU VERY MUCH EXELENT VIDEO IT HELPED ME TO DO IT SUCCESSFULL .
perfect helped me ...
Ottimo video 👍
hi,my remote is 315mhz and i buy a new remote 433mhz..The copying is succeed but when to use to my car alarm its nothing happen so my question is..can it work to copy from 315mhz to 433mhz? or it must in the same frequency? PLss help
Thanks
Wow this sure help.
433Mhz or 433Mhz and 315Mhz pairing?
What's the difference between the blue light and red light
Perfeck Thank you 👌
Thank you for Türkiye
numan temiz thank you for your support man!
I can not get the lights to stay off
same
Is the black one with red buttons available? Pls reply with a link if available. Does the aliexpress store also sell 12v 2 channel relay module?
Hello, do you insist on using the black remote? I'm wondering if the brown one www.aliexpress.com/store/product/433Mhz-Wireless-RF-Switch-DC12V-Relay-Receiver-Module-and-433-92-Mhz-Remote-Controls-For-DC/2138259_32849723010.html?spm=2114.12010615.8148356.23.3cbd440ac56WwL is alright? If you insist on using the black one, we can give you the black module. Just note it to us during your purchase.
Can I use this to copy garage opener remote, car key FOB remotes?
Hi, this remote cannot copy FOB remotes.
היי איך אני יכול לדעת איזה סוגי שלטים השלט הזה יכול לשכפל יש לו תדר מסוים?? ואיך אני יודע מה התדר שלי?? תודה על העזרה
did exact same blue blink mean copied but doesn't worked tried on to many car now way junk
My remote isnt flashing when clicking the two buttons
I have the same issue - any solution ?
Change the battery
???????????my remote does not work following this procedure
I purchase a set that look like this on amazon but they don't work any ideas how to make it work????
Hello, when you copy the remote control, please try to keep the remote control as close as possible. Press the AB buttons together until the indicator light flashes, then copy with the remote control as close as possible
my remote successfully duplicate. but cant open the gate. is it because different volt of the duplicating remote?
I have the same problem. Did you figure it out?
Same problem here, successfully copied but the 2 gates/doors don't open
Hi, I follow the erasing procedure as on the video but after pressing three times on the A button the other buttons still show a light after pressing them. Can anyone help?
You might have mistakenly restored the erased code, try and erase the code again. Be careful not to press the c & d button at the same time, it restores the code.
@@qiachip Thanks for your reply, I will try as soon as I can and will let you know whether it worked or not.
Does India support remote
Remot yang kotak ada antena nya ada huruf abzat a b c d itu apa remot lampu strobo bang
Süper
numan temiz thanks!
Can these copy other people's key fobs
I lost my remote any one help me
Where do you get these
Hello, you can purchase them from www.aliexpress.com/item/433-92-Mhz-Duplicator-Copy-CAME-remote-control-TOP-432EV-TOP-432NA-TOP432NA-With-Battery-For/32687574582.html
Reprogram gate remote controls
Mercci for you
I'm not sure what you mean, can you say that again?
i made one duplicate cloning remot... can i make it clean and make another?
Yes, depending one which type of remote you have I can guide you through it. Just post a link of the remote you purchased from down below.
uae.souq.com/ae-en/came-top432ev-top434ev-garage-door-gate-remote-control-replacement-duplicator-11237792/i/
Hi, that's isn't one of our store. So, we are not sure if there remote control are the same. You can purchase here www.aliexpress.com/item/433-92-Mhz-Duplicator-Copy-CAME-remote-control-TOP-432EV-TOP-432NA-TOP432NA-With-Battery-For/32687574582.html Under the description on the page, there is a detailed guide about how to clone and clean the remote control.
How far distance can it be
I am happy to answer your question.
Here I need to explain a basic doubt to you.
The distance of remote control is related to two factors.
That is, the transmitting remote control and the receiving controller.
If both are good, the distance is very far. If one is poor, the distance will be affected.
Therefore, I can't answer your question accurately because I don't know how your receiving controller is.
I can only provide our data for your reference.
If you use our receiving controller, it can reach 100 meters in an open space;
in a general office environment, it is also about 50 meters.
I hope to solve your problem and look forward to follow-up feedback.
my new remote dont flash when he need learnd
Hi, may i have the URL/ Web Link you purchase your remote control from?
Is this a remote clone 433MHz?
Yes
Ok
Did the procedure some 37 times (!). But what happens is that the new remote takes over the code (so it works), but the original one looses it code. Don't know how to solve this.
Wow, why did your original remote control fail?
Please tell me what the failure phenomenon is?
If you are using our copy remote control, then our remote control will not interfere with the original remote control!
There are two basic points to understand when choosing a copy remote control
1. Is it the same frequency? Our frequency is 433MHz
2. Is it a coding format that can be copied? We are compatible with most of them, but some rolling codes need to be customized
Looking forward to your reply and hope to help you
@@qiachip Yes, both original remotes don't work anymore.
I purchased 2 of your remotes previously (call them A and B), those are programmed with the original remotes.
then, I purchased an extra remote (call it C)
Tried to program remote C with remote A and with remote B. What happens is over and over again, is the following 2 situations:
- After resetting the new remote, when trying to program, the new remote gives 3 light flasehes (2 times), and it its not programmed.
or
- After resetting the new remote, when trying to program, the new remote gives many very quick flashes, resulting in that it is programmed. But the remote A (or B) as source, looses it's functionality.
My original remotes (delivered with the door opener) are indeed 433 MHz.
Coding format can be copied
I am totally puzzled
Good news!Amazon’s new products are on sale for a limited time,
Discount Details:
20% off on $0 +
30% off on $69+
Coupon: RODOT2021
Valid until Feb 31th, 2021
Available for RODOT site-wide items.
www.amazon.com/RODOT-Wireless.../dp/B08VDCP1JY
To give the product as a gift, please email daisy@rodotdiy.com
Não funciona. Joguei dinheiro fora
שכפול שלט
Thank you so much
I like you fuckin Chinese lol just kidding
But the battery 12v 23A is a little bit bigger inside remote.
Any link to correct size?
Very helpfull! Thanks!
Cruzeiro o maior de Minas.