Hi I am your new subscriber. first of all, thank you for creating these amazing tutorials. I managed to install SD on my m1 macbook air. I also followed your last tutorial to install SD on google Collab and got it working, however next day when i was trying to work on SD, it gave me an error. I want to ask if I need to follow the entire reinstallation process every time I wanted to work on SD through collabe or is there any way we can simply launch the SD without going through the entire installation process?
Hi Taruun, Thank you!! :) A downside of Colab is that you need to re-run the Colab notebook each time. This is because starting a new Colab session is similar to working on a fresh computer.
@@LaCarnevali Hi! I have this issue too! May you explain what do I have to do to re-run the Colab notebook? If I restart a new colab page and I refollow all the steps in this video it says that I can't connect the GPU due to Colab limitations...
@@MeilinLi1 Hi Meilin, this is due to Colab GPU limitations. Unless you want to pay for Colab pro, you have to wait until the GPU recharges. Otherwise, you can run it without GPU, but it will be slower.
I have tried this several times following other UA-cam videos and was unsuccessful. I just tried doing it following your steps. Your explanation is simple that even a 1st grader can understand and follow them. Thanks for the simple but informative video. You have just gained a subscriber 😍
Thanks Laura, youv made my day. The best tutorial about instal stable diffusion I find so far. Simple but with a dev approach. with a slow and understable voice 👍
You're a breath of fresh air. Those indian dudes mean well, but don't explain anything and produce sub par videos. You actually take us step by step. I know this video is old but it's super helpful. Liked and subscribed.
Thanks so much for this tutorial! This was really helpful and clear! Liked and subscribed! One important nuance I've found out (maybe very obvious) is that to load Colab on a Mac is preferable in Chrome.
I was able to run everything without a sub to Colab Pro. Not sure if something changed, but I was able to receive a link and use the Web UI. Thanks for the great tutorial.
Wow, this is simple and straight to the point. You just earned a new subscriber. Can you also make a video tutorial about installing latest stable diffusion and its requirements locally on a windows computer? Thanks.
Truly has been one of the best methodologies to follow for Macs. The local installation worked too however, it was slow and cumbersome this one seems to be a bit better as it is on the cloud.
I liked the method you used to explain each step for the installation of Stable Diffusion in Google Colab. If I wanted to add a new extension, what would be the method to incorporate it?
Thank you, Fernando :) There should be a tab named "Extensions" when you start SD on Colab. From there, you can click on "Load from", and a list of extensions ready to be installed should come up. You can watch this video if you have any doubts: ua-cam.com/video/SktvO_OtnOQ/v-deo.html
Grazie mille Laura for these tutorials! They are really clear and easy to follow, I've finally managed to use and understand SD and google colab on my mac thanks to you!🙏
I was using SD locally and I was thinking about buying a new gpu card, but after watching this video, I switched to Colab and bought extended Gdrive space. Good video, I'd love to see a video describing different I guess Colab notebooks because I've seen yours on Auto 1111 and I've seen one on Training ckpts, is there one for Koyhas? Or a video on traning Loras using Colab? I guess notebooks in this since are codes people have made to work using Colab.
Thank you so much for this video. I was literally planning to upgrade my setup and buy a new Nvidia graphic card (as I'm using an AMD one) just to be able to use Stable Diffusion locally. Well, the upgrade has to wait. I'm going to have fun on Stable Diffusion, now ^_^
As a newby I had to have a few goes at this to get it to work. Deleting the sd folder and starting fresh each time prevented errors. Also, my screen displayed a 'Download LoRA' cell which I ignored and it still worked.
Can you make one with diffusers running entirely on Colab? I want it build one to make profile pictures given a personal photos, getting into this from yesterday, amazing!
How do we reopen after the first installation, do we have to redownload the models or should we just copy the path of the model in our drive. And additionally can we add --listen code into command args?
Hey Laura, thank you for the video. When I arrive at the Runtime type there is not the GPU option. Instead, I allows me to choose Python 3 or R. Can you tell me what to do?
hi, i am getting this message Traceback (most recent call last): File "/content/gdrive/MyDrive/sd/stable-diffusion-webui/webui.py", line 7, in from fastapi import FastAPI ModuleNotFoundError: No module named 'fastapi' any advice, thank you
Hi Julio, this is a common issue from yday! It looks like Colab updated Python to 3.9. TheLastBen is updating the dependencies but it will take a bit of time I suppose.
Helloo, :) If the model is from Hugging Face, for example this URL link: huggingface.co/runwayml/stable-diffusion-v1-5/blob/main/v1-5-pruned-emaonly.ckpt Note: the link has to direct you to the checkpoint, like the above! You need to simply copy and paste the URL link in the "MODEL_LINK" under the "Model Load/Download" Section. If the model is on CivitAI, like this one: civitai.com/models/4823/deliberate You need to right-click on the "Download" button and choose "Copy Link Address". You then need to paste the link copied in the "MODEL_LINK" under the "Model Load/Download" Section. Let me know if you have any issues :)
@@LaCarnevali i followed the steps you mentioned for hugging face url but i get an error saying 'wromg link, check the link is valid' Edit : although the CivitAi one you mentioned worked! I'm just having problems with huggingface, i was trying to get waifu diffusion model
@@gamerx2.079 Can you send me the link you are using for the waifu? Seems weird cause the one I shared for HF is working for me. Make sure you are using the latest colab notebook: colab.research.google.com/github/TheLastBen/fast-stable-diffusion/blob/main/fast_stable_diffusion_AUTOMATIC1111.ipynb#scrollTo=p4wj_txjP3TC
One question. If I close the colab session and want to restar other day, I must repeat all the steps? The previous work done before will continue existing?
Yes, you have to restart the process again. This is because starting a new Colab session is similar to working on a fresh computer. The work you did before should be saved in your drive.
Hey Laura, can you make a video of an alternative online platfrom to run comfyui on other than colab since I and a few others noticed that colab seems to have problems even with the paid version? Would be appreciated
Thanks you so much, i have a question! When i am connected for 2-3 hours in Google Colab, it says that i reached my limit for GPU... Does it resets after time?
Hi Jennie, it s not very clear how this works. You might get access to GPU again after a day, a few hours, or a few days. However, if you have another Google account, you might be able to run your notebook on there...
I'm facing an issue regarding the connection. The colab disconnects only after few minutes of connecting and before I click on generate or in the middle of the process it disconnects showing "Runtime disconnected" and I'm unable to use it. It was working perfectly fine but from 2 days I'm facing this issue. Please let me know how to stay connected??
Hi, Colab is not fully reliable with connection, I understand (mainly if your internet connection is not stable). If the issue is your internet connection, you can install SD on your computer locally. Otherwise, you can swap to RunPod, or Paperspace and see how it goes. I think Paperspace has a free option, but I have never used it.
Thank you for the video. I just was wondering.I understand when i use colab, I have to redownload it again. Do I have to download everything again or can i just download certain parts. Do i have to delete everything out when im done. One section was 28.1 gb I have 2tb storage but i dont want to just waste space if i dont need to. I also have Colab pro. Ty for any help you can give me
Рік тому+2
hi, thanks for the detailed informations. unfortunetely i stuck at the ControlNet step and got "NameError: name 'capture' is not defined". I tried a few times from the beginning but cant pass this step. i have 200gb subscription for my Gdrive so I know it is not a storage issue. Do you have any suggestions?
@@LaCarnevali yes, and I'm getting the same problem and I can't find any solution, Laura can you please share your Colab code for the ControlNet installation please
Thanks for sharing your experience with us. I have trained a SD + Dreambooth model and save a copy of the colab notebook at my Gdrive. Let's assume it is called model 1. If later I would like to generate a new model by training SD + Dreambooth + Lora + Latent Couple, how should I do to prevent the model 1from being overwritten or messed up with the new model, model 2 ? Any idea ? Thank you very much!
Really cool is it possible To go deeper into control net and scribble? I was thinking for kids perspective. So kids can draw ✍️ anything and then the AI show their drawing into a real cool animation
Hi Laura, Thanks so much for this tutorial, I run into a problem Loading/Downloading the model however: 1st it returned NameError: name 'os' is not defined - After a stack overflow search I added 'import os' at the start of the code. now it returns NameError: name 'mainpth' is not defined Any advice what I am doing wrong would be awesome :)
@@minpela I got around this issue by just starting again from scratch. I logged out of all google accounts apart from the one I want to use with SD ran through all the steps again and it didn't return the error. Still cant seem to launch SD however. Now the final step returns the error: ModuleNotFoundError: No module named 'pyngrok'
Hi, unfortunately google doesn't allow you anymore to use SD with the free Colab version, so you will need to upgrade to Pro. This will solve the issue.
Great tutorial - Diffusion installed and tested!! Does anyone know of a good primer on using the GUI, though? I’m jumping in and messing around, but keep breaking things!
Thanks. I am working on building an app - however, this code is constantly updated, so I could spend more time updating the app each time instead of running the code. lol If someone has another view please share :D
Amazing video, you explain things very well. I'm unable to complete the module step and need help, can I screen share with you on a live support session?
hi thanks for the tutorial! after using it for a while I got a pop up that says "connection errored out" and when i refreshed the page it says No interface is running right now. Do you have any idea how to fix this?
@@chariskimbeki8342 Hi Charis, if you go back to the code below the Start Stable Diffusion Section, what is the error coming out exactly? If you cannot see an error, try to stop the code running, and run it again, some error should come out.
@@LaCarnevali Same here. For me, I was working in SD for an hour, and it happened. I didn't close the tab (nor did I close the colab tab). However, my Google Chrome puts to sleep tabs which are not in use. So I think the colab tab went to sleep. Here is the error when I started SD in colab again: --------------------------------------------------------------------------- ModuleNotFoundError Traceback (most recent call last) in () 4 import sys 5 import fileinput ----> 6 from pyngrok import ngrok, conf 7 8 Use_Cloudflare_Tunnel = False #@param {type:"boolean"} ModuleNotFoundError: No module named 'pyngrok' --------------------------------------------------------------------------- NOTE: If your import is failing due to a missing package, you can manually install dependencies using either !pip or !apt. To view examples of installing some common dependencies, click the "Open Examples" button below. ---------------------------------------------------------------------------
Followed the tutorial step by step, have everything installed, but while I try to work with the web UI, or generate nay image, it shows connection error. and does not work, I can't even change any settings P.s. My drive has enough empty space. Please help!!!
Good video, thanks. Unfortunately it doesn't work anymore, at least, it doesn't for me. I think Goodle Colab has changed since this video was made four months ago. Errors come up when I get to the ControlNet installation, same for the actual Stable-Diffusion installation. It's unclear but I think it's because I have a 'compute balance' of zero, this was hidden away in Colab and I think it's a currency, so perhaps Colab isn't as free as they made it out to be. Forgive me if I'm wrong because it says it's free all over the internet.
Great tutorials and very clear and concise as well as knowlegeable ! - however, I have followed your tutorial re installing via Colab on an M1 Mac (I have also followed your tutorial on installing on M1 and it works up to a point but a lot of the models have not been downloaded due to storage space on my MacBook Pro and therefore I can't access a lot of the features) and yet keep running into an issue when trying to run SD since it gives me the same error message each time to do with a missing component. Initially there was a warning re exceeding storage on G-Drive but I fixed this by upgrading to a higher tier sub' but now the missing component error is the problem. I tried running it in Chrome instead of Safari but the same issue is there so I think this is why I opted to run SD locally. I tried deleting SD & all components from my G-Drive and re-installing it under Colab but this hasn't fixed the issue - any suggestions ?
This is the error message I'm currently getting : 6 from pyngrok import ngrok, conf 7 8 Use_Cloudflare_Tunnel = False #@param {type:"boolean"} ModuleNotFoundError: No module named 'pyngrok'">
Hi, thank you for your tutorial. I followed the step-by-step to install SD on Collab and worked perfectly, but now I'm having trouble relaunching it. Do I need to run every single code again, (including Install/update Automatic 1111 repo, Requirements, Model download, etc.) or is there a different way to do it? When I try to run all codes again it gives me an error . I might be doing something wrong, so could you clarify the steps I need to take to relaunch? Thanks so much
Hi Bernat. Yes, you need to rerun all of the steps. I would recommend to close and reopen the notebook. Every time you open a new notebook on Colab you are connecting to a different computer. That's why you need to rerun all of the steps
@@LaCarnevali i sorted out the errors and got it to work, but now there is runtime error. everytime i go into stable diffusion there is a disconnection happpening. and then i start all the process again. it happened almost 15 times. cant get it to work. Plz help!
You can download the models and upload them in the Drive before running the code. You need to upload them under: sd > stable-diffusion-webui > models > Stable-Diffusion
Hi Evan, it depends on what system you have. If you have a Windows, I would recommend using your computer (local installation). If you have a Mac, I would recommend using colab/runpod. Some are happy with Colab, some are not. Runpod seems to be winning between the two. Otherwise, you go for the pay-option, I can also recommend you Diffusion Hub. You have free 30 minutes if you want to try it, after need to buy credits diffusionhub.firstpromoter.com/login
This is a common issue from yday! It looks like Colab updated Python to 3.9. TheLastBen is updating the dependencies but it will take a bit of time I suppose.
Thanks for the video it is great. A question please: Do I have to redo all the steps each time I use it. Or has a link been saved somewhere that I click. Thanks Bill G
After setting this up when you go to your recent tab in your drive theres a millions files and photos of ppl dogs, anime, etcetera, why is that? is that the training data this program used? can i delete those? its also concerning that setting this up just downloads thousands of unknown images to your drive. anyone understand this better than me?
Hello Laura! My name is Lucas, and I'm sending you a message from Rio de Janeiro, in Brazil. I'm already a big fan of your amazing work with AI Art. I'm really impressed by the way. So, Iet me ask you a question... I already installed the "Model (21GB). I think for installing the v2_model, I should pay for the Colab Pro version, right?
Hi Lucas! Love Brazil, would love to pass by soon! :) You may still be able to run them on the free version of Colab, as the virtual machine provides 100GB of disk space. However, keep in mind that the virtual machine also has memory and CPU limitations that may impact the performance of your models.
@@LaCarnevali Thanks a lot for your feedback! I don't know if you're coming for a business trip, but if you'll make a seminar or so, I would love to be there!
Hi, Highly appreciable video and made one's life simpler. But every time I run the code, sometime it opens the interface and sometimes it shows Runtime Error. Even after opening, it shows the same error and don't generate image.
Hello Laura Carnevali. Thank you for providing this tutorial. May I ask you something? Currently, Google Colab is a paid service and the cheapest option is $9.99, which includes 100 compute units. Do you know how many images can be produced with 100 compute units? Or how the calculation works? Thank you in advance :)
Hi, not sure - it really depends many things so not easy to estimate. You can try ComfyUI, which is free, or have a look at DiffusionHub (under payment but more stable than Colab, which loose connection very easily). If you want to try DiffusionHub, you have 30minutes free and then you need to pay credits --> can get 10% off with my link diffusionhub.io/?fpr=laura17
Thank you for your great tutorial!! Very easy to understand even for a non-english speaker like myself. I have a question though, my google drive only have 15GB but the ControlNet needs 21GB. Is there anyway to work around it?
You dont need al 21 gb of controlnet) You need to klick a scroll down menu button on the right of this 21gb package, and choose just one of its model (in my opinion, canny model is the best)/ Then you need to choose second model, and it should be also "canny". Both of them weights only about 1,5gb
heya, after installing both on desktop and Google Collab versions - I now want to uninstall everything how do I do this? thanks!!! (iMac getting a bit janky after install)
Hi! Aaah yeah I understand! You can just move to bin the stable-diffusion folder. To uninstall the packages, you can: brew uninstall packagename Example: brew uninstall cmake To uninstall homebrew, /bin/bash -c "$(curl -fsSL raw.githubusercontent.com/Homebrew/install/HEAD/uninstall.sh)" You can check their Github page for more info: github.com/homebrew/install#uninstall-homebrew
@@LaCarnevali Thanks so much man, much appreciated!!! Sticking w Midjourney until Stable Diffusion gets a bit more user friendly 😄 it reminds me of adobe CS4 etc back in the day on PC, where shit doesn't wasn't nearly as smooth as it is now!
I try to understand Colab. Is a Colab Notebook something like a project? Do i have redo all the installsteps and download the models each day i try to train stable diffusion? Is there no way to have a Alias and start the programm from the dock like PS or InDesign?
Yes, unfortunately you need to rerun the code every day, because every time you are running it on different computer. But you are not loosing the work previously done. Consider that the time saved on generating image is worth running the model again.
Hello Laura, new subscriber to your amazi ng channel. I have a question about Mochi Diffusion, wouldn't that run faster on Mac apple silicon natively than stable diffusion web ui?
When I click on the "Start Stable-Diffusion" arrow it starts the download and the little circle continues to rotate but the download stops. I let it run for over 3 hours but it never advanced.
loved youstable diffusion cant take path from macc in "init" videos, can you help me with init image path on mac, path errors always. checked shashes/back slashes but to no success
@LaCarnevali hey, thanks. Issue is that I can't give path to stable diffusion with init image. Cause Mac and windows uses a different path directory. And stb can't recognize Mac path. Ends up with init error.
Hi I am your new subscriber. first of all, thank you for creating these amazing tutorials. I managed to install SD on my m1 macbook air. I also followed your last tutorial to install SD on google Collab and got it working, however next day when i was trying to work on SD, it gave me an error. I want to ask if I need to follow the entire reinstallation process every time I wanted to work on SD through collabe or is there any way we can simply launch the SD without going through the entire installation process?
Hi Taruun, Thank you!! :) A downside of Colab is that you need to re-run the Colab notebook each time. This is because starting a new Colab session is similar to working on a fresh computer.
@@LaCarnevali thanks for answering my question. Now I need to make a choice between running SD on M1 vs. Collab. 😊
I would go with Colab :) quicker and less space consuming
@@LaCarnevali Hi! I have this issue too! May you explain what do I have to do to re-run the Colab notebook? If I restart a new colab page and I refollow all the steps in this video it says that I can't connect the GPU due to Colab limitations...
@@MeilinLi1 Hi Meilin, this is due to Colab GPU limitations. Unless you want to pay for Colab pro, you have to wait until the GPU recharges. Otherwise, you can run it without GPU, but it will be slower.
Meriti minimo mezzo milione di iscritti. Bravissima.
I have tried this several times following other UA-cam videos and was unsuccessful. I just tried doing it following your steps. Your explanation is simple that even a 1st grader can understand and follow them. Thanks for the simple but informative video. You have just gained a subscriber 😍
That was way easier than I was dreading, thanks a lot for the instructions!
Thanks Laura, youv made my day.
The best tutorial about instal stable diffusion I find so far.
Simple but with a dev approach. with a slow and understable voice 👍
after seeing few tutorial to install in google colab, this one really help me... thank you Laura..
You're a breath of fresh air. Those indian dudes mean well, but don't explain anything and produce sub par videos. You actually take us step by step. I know this video is old but it's super helpful. Liked and subscribed.
this was so useful and straight to the point, thank you
Thank you so much for this straightworward tutorial. Just wondered how to update files as new versions would be released
Thank you so much, for the clarity in your tutorial/overviews. Good teaching, Molto Grazie Maestra Carnevali
Thanks so much for this tutorial! This was really helpful and clear! Liked and subscribed! One important nuance I've found out (maybe very obvious) is that to load Colab on a Mac is preferable in Chrome.
This was extremely useful. Thank you. You made a lot more sense to me than all the reading I've done, so far. 😅
I was able to run everything without a sub to Colab Pro. Not sure if something changed, but I was able to receive a link and use the Web UI. Thanks for the great tutorial.
Wow, this is simple and straight to the point. You just earned a new subscriber. Can you also make a video tutorial about installing latest stable diffusion and its requirements locally on a windows computer? Thanks.
Truly has been one of the best methodologies to follow for Macs. The local installation worked too however, it was slow and cumbersome this one seems to be a bit better as it is on the cloud.
I liked the method you used to explain each step for the installation of Stable Diffusion in Google Colab. If I wanted to add a new extension, what would be the method to incorporate it?
Thank you, Fernando :)
There should be a tab named "Extensions" when you start SD on Colab. From there, you can click on "Load from", and a list of extensions ready to be installed should come up.
You can watch this video if you have any doubts:
ua-cam.com/video/SktvO_OtnOQ/v-deo.html
Thank you!! A weight off my back and promising content.
Grazie mille Laura for these tutorials! They are really clear and easy to follow, I've finally managed to use and understand SD and google colab on my mac thanks to you!🙏
These are so good thank you!
thank you so much! It finally works!
I was using SD locally and I was thinking about buying a new gpu card, but after watching this video, I switched to Colab and bought extended Gdrive space. Good video, I'd love to see a video describing different I guess Colab notebooks because I've seen yours on Auto 1111 and I've seen one on Training ckpts, is there one for Koyhas? Or a video on traning Loras using Colab? I guess notebooks in this since are codes people have made to work using Colab.
Grazie mille, tutorial e metodo semplicissimo e funzionale. Complimenti, non vedo l'ora di aggiungere anche Deform. 👍
It contains deform
Thank you so much for this video.
I was literally planning to upgrade my setup and buy a new Nvidia graphic card (as I'm using an AMD one) just to be able to use Stable Diffusion locally.
Well, the upgrade has to wait. I'm going to have fun on Stable Diffusion, now ^_^
Hi, thanks for the tutorial, Please how can I add a Deforum extension?
ua-cam.com/video/SktvO_OtnOQ/v-deo.html Just published this! :)
Hello Laura, thank you very much for your tutorial. It is very informative and easy to follow. I bought the 100 Google credits, to test it out a bit.
Thanks for this useful video!
Lovely videos!! I hope your channel goes off!!
As a newby I had to have a few goes at this to get it to work. Deleting the sd folder and starting fresh each time prevented errors. Also, my screen displayed a 'Download LoRA' cell which I ignored and it still worked.
Really well explained. Thank you Laura.
love all the help , amazing
Can you make one with diffusers running entirely on Colab? I want it build one to make profile pictures given a personal photos, getting into this from yesterday, amazing!
Nice video I didn't know about this option
Very well done explanations! Thank you very much, hepled me a lot!!
Greetings and all the best!
How do we reopen after the first installation, do we have to redownload the models or should we just copy the path of the model in our drive. And additionally can we add --listen code into command args?
Thank you this was so helpful! Subscribed!
Thank you very much Laura for sharing this knowedge.
Hey Laura, thank you for the video. When I arrive at the Runtime type there is not the GPU option. Instead, I allows me to choose Python 3 or R. Can you tell me what to do?
Have you upgraded to Colab PRO?
hi, i am getting this message
Traceback (most recent call last):
File "/content/gdrive/MyDrive/sd/stable-diffusion-webui/webui.py", line 7, in
from fastapi import FastAPI
ModuleNotFoundError: No module named 'fastapi'
any advice, thank you
Hi Julio, this is a common issue from yday!
It looks like Colab updated Python to 3.9. TheLastBen is updating the dependencies but it will take a bit of time I suppose.
@@LaCarnevali So we have to wait a view days?
@@beetlejuice27 same question
@@LaCarnevali the last I was able to see, it's been fixed for the last 12+ hrs or so
@@jonathancm2620 TheLastBen is working with RunPod which is a new different flow they will take some time to correct, if possible
Can you please explain in detail, how do i use the model link option to use custom model of choice?? Thank you
Helloo, :)
If the model is from Hugging Face, for example this URL link:
huggingface.co/runwayml/stable-diffusion-v1-5/blob/main/v1-5-pruned-emaonly.ckpt
Note: the link has to direct you to the checkpoint, like the above!
You need to simply copy and paste the URL link in the "MODEL_LINK" under the "Model Load/Download" Section.
If the model is on CivitAI, like this one: civitai.com/models/4823/deliberate
You need to right-click on the "Download" button and choose "Copy Link Address".
You then need to paste the link copied in the "MODEL_LINK" under the "Model Load/Download" Section.
Let me know if you have any issues :)
@@LaCarnevali i followed the steps you mentioned for hugging face url but i get an error saying 'wromg link, check the link is valid'
Edit : although the CivitAi one you mentioned worked! I'm just having problems with huggingface, i was trying to get waifu diffusion model
@@gamerx2.079 Can you send me the link you are using for the waifu? Seems weird cause the one I shared for HF is working for me. Make sure you are using the latest colab notebook: colab.research.google.com/github/TheLastBen/fast-stable-diffusion/blob/main/fast_stable_diffusion_AUTOMATIC1111.ipynb#scrollTo=p4wj_txjP3TC
One question. If I close the colab session and want to restar other day, I must repeat all the steps? The previous work done before will continue existing?
Yes, you have to restart the process again. This is because starting a new Colab session is similar to working on a fresh computer. The work you did before should be saved in your drive.
Hey Laura, can you make a video of an alternative online platfrom to run comfyui on other than colab since I and a few others noticed that colab seems to have problems even with the paid version? Would be appreciated
Thanks you so much, i have a question! When i am connected for 2-3 hours in Google Colab, it says that i reached my limit for GPU... Does it resets after time?
Hi Jennie, it s not very clear how this works. You might get access to GPU again after a day, a few hours, or a few days. However, if you have another Google account, you might be able to run your notebook on there...
Beautiful look
Thanks so much. Really helpful. Do I have to follow those steps every time I restart my computer?
Yes, it should be quicker after the first time
I'm facing an issue regarding the connection. The colab disconnects only after few minutes of connecting and before I click on generate or in the middle of the process it disconnects showing "Runtime disconnected" and I'm unable to use it. It was working perfectly fine but from 2 days I'm facing this issue. Please let me know how to stay connected??
Hi, Colab is not fully reliable with connection, I understand (mainly if your internet connection is not stable). If the issue is your internet connection, you can install SD on your computer locally. Otherwise, you can swap to RunPod, or Paperspace and see how it goes. I think Paperspace has a free option, but I have never used it.
Hi Laura, excellent video, are you available for private (paid) consultations ?
Thank you for the video. I just was wondering.I understand when i use colab, I have to redownload it again. Do I have to download everything again or can i just download certain parts. Do i have to delete everything out when im done. One section was 28.1 gb I have 2tb storage but i dont want to just waste space if i dont need to. I also have Colab pro. Ty for any help you can give me
hi, thanks for the detailed informations. unfortunetely i stuck at the ControlNet step and got "NameError: name 'capture' is not defined". I tried a few times from the beginning but cant pass this step. i have 200gb subscription for my Gdrive so I know it is not a storage issue. Do you have any suggestions?
This is probably a silly question, but are you sure you run all of the cells in the notebook? Including the requirements cell.
@@LaCarnevali yes, and I'm getting the same problem and I can't find any solution, Laura can you please share your Colab code for the ControlNet installation please
got the same error here too
Thanks for sharing your experience with us. I have trained a SD + Dreambooth model and save a copy of the colab notebook at my Gdrive. Let's assume it is called model 1. If later I would like to generate a new model by training SD + Dreambooth + Lora + Latent Couple, how should I do to prevent the model 1from being overwritten or messed up with the new model, model 2 ? Any idea ? Thank you very much!
Good video! I’m wondering how to train my model on colab?
Given the time constraint (12h of continuous work), should use a small dataset.
Thank you so much Laura
what happened to the notebook? I try to run it, and all it says at the last step is
ModuleNotFoundError: No module named 'pytorch_lightning'
ControlNet is now about 21GB with all models and it hangs while trying to install them all I guess because google drive space is limited?
Thanks for the video
Really cool is it possible To go deeper into control net and scribble?
I was thinking for kids perspective.
So kids can draw ✍️ anything and then the AI show their drawing into a real cool animation
Hi Laura, Thanks so much for this tutorial, I run into a problem Loading/Downloading the model however:
1st it returned NameError: name 'os' is not defined - After a stack overflow search I added 'import os' at the start of the code.
now it returns NameError: name 'mainpth' is not defined
Any advice what I am doing wrong would be awesome :)
Am facing the same problem! any help please.
@@minpela I got around this issue by just starting again from scratch. I logged out of all google accounts apart from the one I want to use with SD ran through all the steps again and it didn't return the error.
Still cant seem to launch SD however. Now the final step returns the error: ModuleNotFoundError: No module named 'pyngrok'
Hi, unfortunately google doesn't allow you anymore to use SD with the free Colab version, so you will need to upgrade to Pro. This will solve the issue.
Great tutorial - Diffusion installed and tested!!
Does anyone know of a good primer on using the GUI, though? I’m jumping in and messing around, but keep breaking things!
Thanks. I am working on building an app - however, this code is constantly updated, so I could spend more time updating the app each time instead of running the code. lol
If someone has another view please share :D
Thanks so much for this tutorial, there was a 504 Gateway Time-out once I clicked on the link, which step I missed or what should I do?
Yes google colab run few hours i think 9 hour before stop work and you may to wait a few hour or tomorrow to run it again.
Amazing video, you explain things very well. I'm unable to complete the module step and need help, can I screen share with you on a live support session?
I think no
Hello, a really good video, thanks for sharing your knowledge.
hi thanks for the tutorial! after using it for a while I got a pop up that says "connection errored out" and when i refreshed the page it says No interface is running right now. Do you have any idea how to fix this?
What is the error log in the colab? There should be the source of the issue
Same here
@@chariskimbeki8342 Hi Charis, if you go back to the code below the Start Stable Diffusion Section, what is the error coming out exactly? If you cannot see an error, try to stop the code running, and run it again, some error should come out.
@@LaCarnevali Same here. For me, I was working in SD for an hour, and it happened. I didn't close the tab (nor did I close the colab tab). However, my Google Chrome puts to sleep tabs which are not in use. So I think the colab tab went to sleep.
Here is the error when I started SD in colab again:
---------------------------------------------------------------------------
ModuleNotFoundError Traceback (most recent call last)
in ()
4 import sys
5 import fileinput
----> 6 from pyngrok import ngrok, conf
7
8 Use_Cloudflare_Tunnel = False #@param {type:"boolean"}
ModuleNotFoundError: No module named 'pyngrok'
---------------------------------------------------------------------------
NOTE: If your import is failing due to a missing package, you can
manually install dependencies using either !pip or !apt.
To view examples of installing some common dependencies, click the
"Open Examples" button below.
---------------------------------------------------------------------------
So do you have to repeat that whole proceess every time you run stable diffusion?? 11:40
Unfortunately, yes. When you open a new Colab notebook, you are connecting to a new computer.
Thank you very much miss
when I press generate I see this "LayerNormKernelImpl" not implemented for 'Half' why ?
I get this error: ModuleNotFoundError: No module named 'torchvision.transforms.functional_tensor' after running the last part. What do I do?
if you have google colab pro, try and click on runtime from the list above and then click on run all.
Followed the tutorial step by step, have everything installed, but while I try to work with the web UI, or generate nay image, it shows connection error. and does not work, I can't even change any settings P.s. My drive has enough empty space. Please help!!!
Good video, thanks. Unfortunately it doesn't work anymore, at least, it doesn't for me. I think Goodle Colab has changed since this video was made four months ago. Errors come up when I get to the ControlNet installation, same for the actual Stable-Diffusion installation. It's unclear but I think it's because I have a 'compute balance' of zero, this was hidden away in Colab and I think it's a currency, so perhaps Colab isn't as free as they made it out to be. Forgive me if I'm wrong because it says it's free all over the internet.
yep, need to upgrade to Colab pro
Hi you didn't show what link you use to get the image of stable diffusionon google colab
Great tutorials and very clear and concise as well as knowlegeable ! - however, I have followed your tutorial re installing via Colab on an M1 Mac (I have also followed your tutorial on installing on M1 and it works up to a point but a lot of the models have not been downloaded due to storage space on my MacBook Pro and therefore I can't access a lot of the features) and yet keep running into an issue when trying to run SD since it gives me the same error message each time to do with a missing component.
Initially there was a warning re exceeding storage on G-Drive but I fixed this by upgrading to a higher tier sub' but now the missing component error is the problem.
I tried running it in Chrome instead of Safari but the same issue is there so I think this is why I opted to run SD locally.
I tried deleting SD & all components from my G-Drive and re-installing it under Colab but this hasn't fixed the issue - any suggestions ?
This is the error message I'm currently getting : 6 from pyngrok import ngrok, conf
7
8 Use_Cloudflare_Tunnel = False #@param {type:"boolean"}
ModuleNotFoundError: No module named 'pyngrok'">
Hi, this seems to be common to who doesnt have colab pro. Colab is not a free option anymore for SD. If you upgrade it should work. :(
@@LaCarnevali - Hmm...I just signed up for Colab Pro and the same error messages and stalls when trying to install...
@@LaCarnevali - Got it working eventually - the UI seems to running from a Gradio link, which I didn't expect for some reason.
hello Laura, can we use colab to speed the stable diffusion local?
thank you! thats super useful!!
Hi, thank you for your tutorial. I followed the step-by-step to install SD on Collab and worked perfectly, but now I'm having trouble relaunching it. Do I need to run every single code again, (including Install/update Automatic 1111 repo, Requirements, Model download, etc.) or is there a different way to do it? When I try to run all codes again it gives me an error . I might be doing something wrong, so could you clarify the steps I need to take to relaunch? Thanks so much
Hi Bernat. Yes, you need to rerun all of the steps. I would recommend to close and reopen the notebook. Every time you open a new notebook on Colab you are connecting to a different computer. That's why you need to rerun all of the steps
@@LaCarnevali Hi, do you have to download all of the control net models each time too?
HI, the video was easy to follow. thank you. But i am encountering error in running controlNet extensions. can you help ?
what shd I do?
What errors?
@@LaCarnevali i sorted out the errors and got it to work, but now there is runtime error. everytime i go into stable diffusion there is a disconnection happpening. and then i start all the process again. it happened almost 15 times. cant get it to work. Plz help!
Is it possible to install other models in the models directory with this tutorial?
You can download the models and upload them in the Drive before running the code.
You need to upload them under: sd > stable-diffusion-webui > models > Stable-Diffusion
do i have to repeat all the same steps the next time i use it?
after installation in google colab does not generate an image
RuntimeError: 'LayerNormKernelImpl' not implemented for 'Half'
what to do?
Ciao Laura, I have a silly question. How do you put a dark theme on sdxl on google colab?
A deserved thumbs up from here :)
Hi. Im new to SD why do you have to upgrade to Colab Pro? Is it worth it or is there better opinions?
Hi Evan, it depends on what system you have. If you have a Windows, I would recommend using your computer (local installation). If you have a Mac, I would recommend using colab/runpod. Some are happy with Colab, some are not. Runpod seems to be winning between the two. Otherwise, you go for the pay-option, I can also recommend you Diffusion Hub. You have free 30 minutes if you want to try it, after need to buy credits diffusionhub.firstpromoter.com/login
Hi Laura. Every time i try to run SD, i get an error that a module is missing. It started with FastAPI, but it just doesnt stop after that. cheers
This is a common issue from yday!
It looks like Colab updated Python to 3.9. TheLastBen is updating the dependencies but it will take a bit of time I suppose.
Thanks for the video it is great. A question please: Do I have to redo all the steps each time I use it. Or has a link been saved somewhere that I click. Thanks
Bill G
yes, you need to go through all of the steps unfortunately
After setting this up when you go to your recent tab in your drive theres a millions files and photos of ppl dogs, anime, etcetera, why is that? is that the training data this program used? can i delete those? its also concerning that setting this up just downloads thousands of unknown images to your drive.
anyone understand this better than me?
Hello Laura! My name is Lucas, and I'm sending you a message from Rio de Janeiro, in Brazil. I'm already a big fan of your amazing work with AI Art. I'm really impressed by the way. So, Iet me ask you a question... I already installed the "Model (21GB). I think for installing the v2_model, I should pay for the Colab Pro version, right?
Hi Lucas! Love Brazil, would love to pass by soon! :)
You may still be able to run them on the free version of Colab, as the virtual machine provides 100GB of disk space. However, keep in mind that the virtual machine also has memory and CPU limitations that may impact the performance of your models.
@@LaCarnevali Thanks a lot for your feedback! I don't know if you're coming for a business trip, but if you'll make a seminar or so, I would love to be there!
I take it you have to pay for the gpu? The only option is for me who hasn't paid is a T4 gpu, cpu, tpu.
Hi, Highly appreciable video and made one's life simpler. But every time I run the code, sometime it opens the interface and sometimes it shows Runtime Error. Even after opening, it shows the same error and don't generate image.
that's an issue with Colab unfortunately. If you are willing to pay for a subscription, you can try Diffusion Hub/ think Diffusion
Hello Laura Carnevali. Thank you for providing this tutorial. May I ask you something? Currently, Google Colab is a paid service and the cheapest option is $9.99, which includes 100 compute units. Do you know how many images can be produced with 100 compute units? Or how the calculation works? Thank you in advance :)
Hi, not sure - it really depends many things so not easy to estimate. You can try ComfyUI, which is free, or have a look at DiffusionHub (under payment but more stable than Colab, which loose connection very easily). If you want to try DiffusionHub, you have 30minutes free and then you need to pay credits --> can get 10% off with my link diffusionhub.io/?fpr=laura17
I opened your google colab file in the description but why is the automatic1111 install part different from the one in this video?
Hi, the video was made a few months ago, so the notebook has changed since then
You're awesome. Thank you.
how can I start the interface again ? radio says no interface is running but everything is installed in drive
Need to re-run the code...
Thank you for your great tutorial!! Very easy to understand even for a non-english speaker like myself. I have a question though, my google drive only have 15GB but the ControlNet needs 21GB. Is there anyway to work around it?
Hi, thanks :) You can buy storage on Google Drive. Not sure if there is a free alternative.
Same question, is there any free option for installing the 21GB of ControlNet
@@Vtrescincodiez If you have a good PC, you can install it locally. I don't think you can get free external space for free.
You dont need al 21 gb of controlnet) You need to klick a scroll down menu button on the right of this 21gb package, and choose just one of its model (in my opinion, canny model is the best)/ Then you need to choose second model, and it should be also "canny". Both of them weights only about 1,5gb
heya, after installing both on desktop and Google Collab versions - I now want to uninstall everything how do I do this? thanks!!! (iMac getting a bit janky after install)
Hi! Aaah yeah I understand! You can just move to bin the stable-diffusion folder. To uninstall the packages, you can:
brew uninstall packagename
Example: brew uninstall cmake
To uninstall homebrew,
/bin/bash -c "$(curl -fsSL raw.githubusercontent.com/Homebrew/install/HEAD/uninstall.sh)"
You can check their Github page for more info:
github.com/homebrew/install#uninstall-homebrew
@@LaCarnevali Thanks so much man, much appreciated!!! Sticking w Midjourney until Stable Diffusion gets a bit more user friendly 😄 it reminds me of adobe CS4 etc back in the day on PC, where shit doesn't wasn't nearly as smooth as it is now!
Since webui is not working anymore on colab (or so I've heard) could you host it one Kaggle?☺☺
i get this error @7:48 NameError: name 'mainpth' is not defined
You probably need to upgrade to Colab Pro
is it necessary to redo all these settings again and again to start sd ? de tells me that it does not find an interface
Yup
I try to understand Colab. Is a Colab Notebook something like a project? Do i have redo all the installsteps and download the models each day i try to train stable diffusion? Is there no way to have a Alias and start the programm from the dock like PS or InDesign?
Yes, unfortunately you need to rerun the code every day, because every time you are running it on different computer. But you are not loosing the work previously done. Consider that the time saved on generating image is worth running the model again.
@@LaCarnevali Thank you for your help!
Hi Laura. This process was all this done on a Mac, right? Since it is a web based process could be done in any system, or not?
Exactly, you can use it on other systems too ;)
@@LaCarnevali Thanks! great work you are doing!
Hello Laura, new subscriber to your amazi ng channel. I have a question about Mochi Diffusion, wouldn't that run faster on Mac apple silicon natively than stable diffusion web ui?
Yes it should - I haven't tried it though, so not sure if it has the same flexibility as Automatic1111. I will check that :)
Can you also use controlnet with this option?
Yes, you can ;)
When I click on the "Start Stable-Diffusion" arrow it starts the download and the little circle continues to rotate but the download stops. I let it run for over 3 hours but it never advanced.
Do you have colab pro?
loved youstable diffusion cant take path from macc in "init" videos, can you help me with init image path on mac, path errors always. checked shashes/back slashes but to no success
Sorry, not sure I got it. what's the issue?
@LaCarnevali hey, thanks. Issue is that I can't give path to stable diffusion with init image. Cause Mac and windows uses a different path directory. And stb can't recognize Mac path. Ends up with init error.