Super quick and raw video for you today. Nothing fancy here, just wanted to get the message out to those of you putting pH up/down directly into your nutrient solution. Adding pH up/down directly into the nutrient solution is a mistake that I've made before and I don't hear many people talk about this crucial step. Here is that video by Everest Fernandez that I spoke about within this video-> ua-cam.com/video/X5vLME0N-54/v-deo.html Also... Blue Planet Nutrients (Discount code: MRGROWIT)- bit.ly/2lzjC2i pH Up & pH Down (Discount code: MRGROWIT)- bit.ly/2HxgoER PH meter- amzn.to/2tcfrhh
Excellent advice Chris, It was a mistake I made thirty years ago and had to learn by myself because there was no internet back then. You new growers don't realize how good you have it with people Like Chris to steer you right. My first and last experience with adding potassium silicate was awful, It coagulated into a suspended sludge like substance (thats what the cloud Chris showed you) my pump distributed it throughout my system and plugged up drip lines and I had to scrape it off my rock wool so the water would go through it again, I replaced all of my spaghetti lines.
It's called flockulation it happens anytime you ad up to a fert solution to avoid do as you did or adjust the plane water first then add the fert and it will drop down. Flockulation is binding the fert molecules up too big to enter the roots it turns into something similar to gyprock turning cloudy and falling out of solution. Great tip I worked in a hydro store for over ten years and almost no one was aware of this
Damn. I've been making this mistake for 3 grows, now. Oops. Thanks for the video Chris, I hope you know how much of a help you are to "our community". Keep em coming, man. I can't get enough.
Keep the water turning in one circular stirring motion while adding your droplets and it will cut down on the clouding tremendously. Very good thoughts though, diluting it would be the A+ way to go. So med.
I was trying to cheap out on PH testing on the first grow (single plant). I just used the aquarium ph tester and it said 7.4. I have ordered things from Amazon. Thank you for the info. You are one of the best presenters on youtube.
THIS is why it's important to watch old videos from people you follow. I have never known this and have been doing it wrong my last 4 grows. Thank you Chris!!
Finally found what I need. Cause when I put in ph up it just cloud like that. Thanks for the video. I knew that there was something wrong with it when I put in the ph
Thanks man! good video. Only thing that sucks is having so much extra water in your dwc that you’ll either have to scoop or drain out to get back to the appropriate level of your net pot. And then also having to re-assess PPMs, EC, and TDS. It’s a never ending cycle it seems. And also seems like it would take hours to feed your plants plants playing catch up
Hey man could you revisit this on a grow talk. Maybe like chemical reactions with nutes. You could talk about the ph cloudy again. Also include proper silica mixing so you don't make sand. And I also know about calcium locking out phosphorus or potassium if mixed in the wrong ratios. I'm trying to think of any other reactions to be aware of but I'm sure there's alot. Didnt you settle that phing is fine for microbes. But I think you get the jist, I think this would be a great topic.
The TNB Down & Up is a salt bass and you can just had a little at a time tell the Ph is at your standards it’s amazing & works every time. Also it’s mess free 💯 Good video thanks again 💚
Look at that! I've learned something new today! Thanks Chris! I'll definitely keep that in mind for now on. Just another extra step to keep the girls happy! Happy growing!
After only a few watering's you should know how much of which product (Up or Down.) that you'll need to add to get within your pH range. Once you know that you can add your pH prior to mixing. Started doing that when I switched to well water, where I had to start using pH down & because it was acidic ( As apposed to pH up just being a base.) I figured that it would lock up easier and after I have my water measured out adding more water is just that extra water that throws off the formula (However minor that is.). Never really thought of it from a chemical reaction stand point.
Thank you for this video! I just make this mistake and saw the “cloud” you speak of. I began to wonder if the nutrients were reacting with the ph up and down.
Thank you very much for this information!! My Ph always go back up when I adjust it to 5.8 and let it sit for a few it’s always goes back up to 6.1 or +
I always do this. With almost everything I mix. It just allows things to combine easier too and of course avoiding the danger of having things crash out.
Anytime you mix acid or base into a chemical compound you are always going to get a chemical reaction. That’s the point. Just because you deleted it doesn’t mean it’s not still doing the same thing. You see the cloud because it’s a high dose reaction but in reality when it’s diluted it’s a smaller scale but the same chemical reaction is still occurring
I noticed that with PH- too...I don’t need to add much to drop my tap water, but I do pre-mix it before I add it to my water... I also use General Hydroponic’s granular fertilizers (Maxi-grow/Maxi-bloom)and I do the same with pre-mixing them...Seams like I get better distribution in the bucket... 👍🏼👍🏼👍🏼☮️
Wow I just saw that! Thanks I would have fell right into that non- deluded and added just like that..Thanks and to that rocket scientist who said bad chemistry was happening..u guys rock!!!
I was trying to raise PH off a 5 gallon bucket of solution and it did not want to move from 4.1. i added a bit at a time, testing after each but after 5 try, I tested other things to make sure my meter was not broken. I then tried to raise pH in same solution but just a cup of it and it worked. Could not figure outlets why the main 5 gallon world not move from 4.1. I rested enough so I left it as-is at that point since I already wasted a good amount of my small bottle. What you explained in this vid must be what I was going through. I'll try the dilute first method and see if that gets things moving. Thanks.
Thanks so much for your videos, didn't realize about the PH. also thanks for your par testing on the growers choice E680, helped in deciding what to buy. Keep growing, keep sharing.
Your video randomly popped up and made me realize I forgot to ph my 55gal drum I mixed earlier when I had a major distraction. . I'm in promix and the drum was at 6.7.. Thank you,. I also dilute and ph down my silica before adding to the drum. it has a very high ph and can cause some fallout when nutrients start getting added depending on your starting ph. I think around 8 bad things start happening. I was having clouding issues and this stopped it immediately. Using jacks 3-2-1 and I mix in a 5 gallon bucket and then add it to the drum in the proper order. For me Its more steps but gives me the opportunity to catch myself if I screw up.
I've been struggling with this to the point that I stopped doing it, this video super simple and informative. Do you also check ppm run off and how do you do this
Unintentionally doing this correctly. I don't like using the little tiny dropper. So I mixed some with a gallon of water. Ratio , ½ cup of water to 1 point approximately.
I've been growing Cannabis since 2014 and never had a problem with my plants until this 2023 i started using Organic banana mango orange and potato to help them grow stronger and now my leafs are Yellow and many are dry 😢 before i started giving them Nutrients they would grow healthy and green. Now they even lost smell 😢 i think with a good mix of soil and plenty of water and sun light they should grown fine
I did not know this...I have been having problems with my ppm fluctuating and have had no idea why. Could this be the reason for my fluctuating ppm? Thanks for sharing the knowledge!
Really enjoyed this video. I’m growing tomatoes in a container and my ph levels are extremely low. Your video discusses increasing ph level in nutrients…what type of nutrients would you recommend for tomatoes in containers while increasing the ph levels from some very low levels? Thank you for your assistance.
@@jst4572 I thought of this yesterday, assuming we use the same brand of nutrients each time. We know how much PH down is required, so just putting the PH down in first would achieve the same thing surely ? My babies looking so green and vibrant just adding it whenever though.
i could see diluting the mixture so as to mix the mixture in small amounts to get to your target, but you just poured the whole thing in... you can just add a few drops at a time to the primary container at that rate... but let me say to anyone who thinks they can bypass ph testing. you can't... and if you're doing hydroponics you MUST check daily because the plant will really mess with the ph balance depending on where it's at in its growth and nutrient needs.
I am new to cannabis cultivation and I am in the process of learning how to grow. So far, I have decided to grow autoflowers in coir mixed with 15% perlite and with granular organic fertilizer. Just recently, I've learned of the importance of pH. I am on well water and had it laboratory tested about 7 years ago. It showed that I had a pH of 7.17 which I understand is far too alkaline for growing in a soil-less medium. I'm assuming this number hasn't changed significantly so apparently I have to bring the pH down to around 5.8 or slightly lower. While I understand how to do this, my problem is in finding good, objective information as to which particular pH meter I should purchase. The most consistent and credible information is that the cheap meters aren't worth purchasing. The reviews of the cheaper units on Amazon seem to support this. I noticed that you are using an Apera p60 which happens to be one of the two that I'm considering. The other is the Bluelab BLU2210 pH Pen. The most significant difference between the two (in my opinion) is that you can purchase a replacement probe for the Apera but not the Bluelab. I have no idea if this is an important consideration. I'm hoping that you could provide me with your recommendations. I've watched many of your videos and find them extremely helpful. Thanks for your efforts. Cheers.
Gosh, I really wish I could talk to somebody about acidity and pH. What I would like to know is, do I need to start balancing my pH before I pour Foxfarm into soil or should I just follow the recommended chart regardless of how high my pH gets because my babies seem to keep disintegrating every time I does, even when I dial it back. It’s just a conundrum to me and I don’t want to mess up and I wanna get this figured out and how to convert fox farms for soil has been a journey; most definitely switching to Hydro in the next few years when I can afford it.
Hellz yeah brother been researching around the clock for quite some time and never have never heard about this hack or pre-diluting your ph up and down before adding to your nutrient solution!👍 So kind of just stating the obvious here but if your just ph'ing your water without any other nutrients involved theres obviously no need for this ......correct!?!?👍
@@hlaw2830 ah you must be one of them grow know it alls huh! Or you just have no friends or no one else to argue with so you resort to trolling people in the comments section, damn clown!✌💯
Wow thanks for sharing this. I was recently wondering why this was happening to me when i added ph up. I was also having problems with magnesium and calcium with perfect watering of 6.3 soil grow. I think this is gonna solve my problem!
Nice video thank you for the PH dillution tip. I think it depends what kind of nutrients you are using - many nutrient lines have a certain way you add the nutrients to prevent any chemical response. Fox Farm is one of those brands along with Grotek I have had no issues using direct PH down with. With compost teas etc - like you said there will def be a reaction. Would introducing some of the compost tea into the water that you are PH downing in the cup make any difference? I guess it would let you see if there was going to be a strong reaction - just theorizing here.
That why every brand recommends to do not mix nutes from other different brands. I use biocanna nutes with terra soil, dont check the ph always get 1g per 1 watt. Not sure if changing nutes and method will result in a disaster
Chris, Love your work you have gotten me to do my own growing. Your content is amazing on point material. Keep up the good work. Have a Q? Can i pre mix my nutrients, molasses, recharge, etc. and save for future feeding and if so for how long can i store for.
Super quick and raw video for you today. Nothing fancy here, just wanted to get the message out to those of you putting pH up/down directly into your nutrient solution. Adding pH up/down directly into the nutrient solution is a mistake that I've made before and I don't hear many people talk about this crucial step. Here is that video by Everest Fernandez that I spoke about within this video-> ua-cam.com/video/X5vLME0N-54/v-deo.html
Also...
Blue Planet Nutrients (Discount code: MRGROWIT)- bit.ly/2lzjC2i
pH Up & pH Down (Discount code: MRGROWIT)- bit.ly/2HxgoER
PH meter- amzn.to/2tcfrhh
So what is the downside to adding ph straight to reservoir?
@@theknightspalace your so smart.I wish I was a genius like you.And notes that brilliant.You sure helped me out.lol
What would happen if you just mixed it without dilution?
Thanks man. I had no freaking idea thats what the cloud was. Appreciate it man, thanks for sharing 👍
And with this method can I add both pH up and pH down to the same nutrient solution?
Ive never mixed liquid nutes before so didn't realize this was a thing to know. thanks for sharing man.
Shout the f! out to you on the spiderfarm QB.. happy New year! Can I download your music playlist..🤣🤣🤣🤣🙏😎
We watch your videos for learning as well. You and mr. Grow are our "go to guys" when we need to know somethin
Oh and wizard npk and lex blazer You guys are our top 4
@@linseywicker6843 Can't forget lex blazer and check out DGC's grow talks; learnt so much from those guys
Its actually the nutrients binding together and locking out which becomes un available to the plant
This is honestly huge, I’m glad I found this.
I been using lemon juice and baking soda as a ph up and ph down. Working wonderful
Excellent advice Chris, It was a mistake I made thirty years ago and had to learn by myself because there was no internet back then.
You new growers don't realize how good you have it with people Like Chris to steer you right.
My first and last experience with adding potassium silicate was awful, It coagulated into a suspended sludge like substance (thats what the cloud Chris showed you) my pump distributed it throughout my system and plugged up drip lines and I had to scrape it off my rock wool so the water would go through it again, I replaced all of my spaghetti lines.
Hey amigo-thanks for the shout-out. Much appreciated!
I was always taught give credit where credit is due 🙂 ... I hope all has been well with you. Cheers man!
It's called flockulation it happens anytime you ad up to a fert solution to avoid do as you did or adjust the plane water first then add the fert and it will drop down.
Flockulation is binding the fert molecules up too big to enter the roots it turns into something similar to gyprock turning cloudy and falling out of solution. Great tip I worked in a hydro store for over ten years and almost no one was aware of this
And how did their plants grow ? Just fine I bet. Or they could have had 2% more yield , not worth it.
Damn. I've been making this mistake for 3 grows, now. Oops. Thanks for the video Chris, I hope you know how much of a help you are to "our community". Keep em coming, man. I can't get enough.
Beginners make this mistake all the time and don't realize the impact on soil health. Thanks for sharing with the community
well in hydro it does not matter
Keep the water turning in one circular stirring motion while adding your droplets and it will cut down on the clouding tremendously. Very good thoughts though, diluting it would be the A+ way to go. So med.
I was trying to cheap out on PH testing on the first grow (single plant). I just used the aquarium ph tester and it said 7.4. I have ordered things from Amazon. Thank you for the info. You are one of the best presenters on youtube.
I am so happy that i randomly found this video scrolling around. I just ordered ph+ & - and start using it tomorrow 😂. Thank you sir
I know this is old but I just learned this about 2 weeks ago and I wish I had seen this when It came out, completely makes sense.
Same here im mid weeks 4 ill do it for sure !
I use distilled white vinegar and baking soda to adjust ph. Never noticed a cloud but am going to use this method from now on. Thank you for the tip!
I was going to ask about this. I also use vinegar and baking soda. Is there any reason not to?
Vinegar will not stabilize pH in the medium long term. It also kills microbial life.
THIS is why it's important to watch old videos from people you follow. I have never known this and have been doing it wrong my last 4 grows.
Thank you Chris!!
Fabulous information in which I was not aware-thank you sir!
I bought your book and I'm waiting for it in the mail, until then I'm listening to your videos. Thank you
Finally found what I need. Cause when I put in ph up it just cloud like that. Thanks for the video. I knew that there was something wrong with it when I put in the ph
Thanks man! good video. Only thing that sucks is having so much extra water in your dwc that you’ll either have to scoop or drain out to get back to the appropriate level of your net pot. And then also having to re-assess PPMs, EC, and TDS. It’s a never ending cycle it seems. And also seems like it would take hours to feed your plants plants playing catch up
Hey man could you revisit this on a grow talk. Maybe like chemical reactions with nutes. You could talk about the ph cloudy again. Also include proper silica mixing so you don't make sand. And I also know about calcium locking out phosphorus or potassium if mixed in the wrong ratios. I'm trying to think of any other reactions to be aware of but I'm sure there's alot. Didnt you settle that phing is fine for microbes. But I think you get the jist, I think this would be a great topic.
The TNB Down & Up is a salt bass and you can just had a little at a time tell the Ph is at your standards it’s amazing & works every time. Also it’s mess free 💯 Good video thanks again 💚
What?
Look at that! I've learned something new today! Thanks Chris! I'll definitely keep that in mind for now on. Just another extra step to keep the girls happy! Happy growing!
After only a few watering's you should know how much of which product (Up or Down.) that you'll need to add to get within your pH range.
Once you know that you can add your pH prior to mixing.
Started doing that when I switched to well water, where I had to start using pH down & because it was acidic ( As apposed to pH up just being a base.) I figured that it would lock up easier and after I have my water measured out adding more water is just that extra water that throws off the formula (However minor that is.).
Never really thought of it from a chemical reaction stand point.
I use lemon juice, the only direction I ever need to go is down, lemon juice is perfect the plants love it
Thank you for this video! I just make this mistake and saw the “cloud” you speak of. I began to wonder if the nutrients were reacting with the ph up and down.
Yasss this happened all summer long! I knew it was a reaction but didn't realize it was negative
Ran into this problem after I finally had to start using pH up. Always good to revisit
Thank you very much for this information!! My Ph always go back up when I adjust it to 5.8 and let it sit for a few it’s always goes back up to 6.1 or +
I use that same PH meter. Best meter I've ever owned.
Which one is it? Amazon link 😄
@@DV-zv4ox I've used several PH meters and this is by far the best I've used.
I def make this mistake and have noticed the grey cloud many times. Ty for this,.
odd, 25 years of hydo adding ph up & down directly to my nutes with no issues.
Another suggestion is after you mix your nutes let it sit for a half hour or so before testing for ph the ph will rise giving you a more active level!
Didn't know this! Thank you
Btw You can make the backlight stay on in the ph pen menu
I always do this. With almost everything I mix. It just allows things to combine easier too and of course avoiding the danger of having things crash out.
I’ve tried this method twice now and not only did it still cloud up it fucked up both of my feeds. Any insight to this?
Side note I ran a whole grow just puttin the ph up straight into the feed n from what I saw no issues
Anytime you mix acid or base into a chemical compound you are always going to get a chemical reaction. That’s the point. Just because you deleted it doesn’t mean it’s not still doing the same thing. You see the cloud because it’s a high dose reaction but in reality when it’s diluted it’s a smaller scale but the same chemical reaction is still occurring
This is an old video but he's right .. leads to nutrient lockout.
I dilute mine in distilled water 1/10 then store it in a large medicine syringe. Makes it easy to dose and it stores well for a week or so.
Smart. So you mix your ph w your distilled water then store it in a syringe?
@@Javanni correct. I use 80 % phosphoric acid. I find it easier to work with this way.
I noticed that with PH- too...I don’t need to add much to drop my tap water, but I do pre-mix it before I add it to my water...
I also use General Hydroponic’s granular fertilizers (Maxi-grow/Maxi-bloom)and I do the same with pre-mixing them...Seams like I get better distribution in the bucket...
👍🏼👍🏼👍🏼☮️
Thank you man that really help because I really didn’t know that. I will do that for now on
Wow I just saw that! Thanks I would have fell right into that non- deluded and added just like that..Thanks and to that rocket scientist who said bad chemistry was happening..u guys rock!!!
I was trying to raise PH off a 5 gallon bucket of solution and it did not want to move from 4.1. i added a bit at a time, testing after each but after 5 try, I tested other things to make sure my meter was not broken. I then tried to raise pH in same solution but just a cup of it and it worked. Could not figure outlets why the main 5 gallon world not move from 4.1. I rested enough so I left it as-is at that point since I already wasted a good amount of my small bottle. What you explained in this vid must be what I was going through. I'll try the dilute first method and see if that gets things moving. Thanks.
I always do this and I noticed alot of people dont ur right about that I use a milk container so I dilute it atleast a litre
such a great VIDEO. Does this happen when adding micronized calcium and Citric acid?
Thanks, you just solved my issue for a long time now.
Thanks so much for your videos, didn't realize about the PH. also thanks for your par testing on the growers choice E680, helped in deciding what to buy. Keep growing, keep sharing.
Your video randomly popped up and made me realize I forgot to ph my 55gal drum I mixed earlier when I had a major distraction. . I'm in promix and the drum was at 6.7.. Thank you,. I also dilute and ph down my silica before adding to the drum. it has a very high ph and can cause some fallout when nutrients start getting added depending on your starting ph. I think around 8 bad things start happening. I was having clouding issues and this stopped it immediately. Using jacks 3-2-1 and I mix in a 5 gallon bucket and then add it to the drum in the proper order. For me Its more steps but gives me the opportunity to catch myself if I screw up.
Silica should always be the very first thing going into your solution.
I've been struggling with this to the point that I stopped doing it, this video super simple and informative. Do you also check ppm run off and how do you do this
Look up lemon juice to ph down
I noticed precipitate on the bottom of my rez. Very helpful. Thank you.
WaW thats sum good info bro never heard of this but im glad I did, im always eager to learn on how to better my plants in any way possible.
Do you check the ph, before adding the nutrients or after the nutrients go in?
Unintentionally doing this correctly. I don't like using the little tiny dropper. So I mixed some with a gallon of water. Ratio , ½ cup of water to 1 point approximately.
Thank you for making the video totally did not know you were supposed to dilute first, lesson learned and applied.
I'm doing this from now on thanks
Excellent info like usual 👌 I will start doing this as I was doing it wrong before.
I like learning new procedures. Thanks
I've been growing Cannabis since 2014 and never had a problem with my plants until this 2023 i started using Organic banana mango orange and potato to help them grow stronger and now my leafs are Yellow and many are dry 😢 before i started giving them Nutrients they would grow healthy and green. Now they even lost smell 😢 i think with a good mix of soil and plenty of water and sun light they should grown fine
That wasn't the plant that was you with your organic nutrients that did that
hello bro, great informative video. Should I be doing the same process for PH Down or only for PH Up?
Thanks for the tip Mr. G!
So cool to see the PH60 in use on UA-cam, that’s my brand of choice for test instruments
Better than bluelab. Bout to buy one or the other
I've saw that same color yesterday!! Thanks for info great job
Do a video how you mix your blue planet please. There’s not a lot of videos for it plus you’re the only UA-camr I trust lol
Good stuff Player! I just recently am having to ph adjust my water and noticed the cloud when i added PH down.
I did not know this...I have been having problems with my ppm fluctuating and have had no idea why. Could this be the reason for my fluctuating ppm? Thanks for sharing the knowledge!
You saved me bro!! Best vid on the net!
Really enjoyed this video. I’m growing tomatoes in a container and my ph levels are extremely low. Your video discusses increasing ph level in nutrients…what type of nutrients would you recommend for tomatoes in containers while increasing the ph levels from some very low levels? Thank you for your assistance.
I've been putting in undiluted, and my plants are looking very healthy, I will be trying diluted next time though, see what the difference is.
Same here. Next grow I’ll do some more experimenting. I’ve never had the gray cloud issue though. 🤷🏽♂️
@@jst4572 I thought of this yesterday, assuming we use the same brand of nutrients each time.
We know how much PH down is required, so just putting the PH down in first would achieve the same thing surely ?
My babies looking so green and vibrant just adding it whenever though.
Thank you for the cloud info and video link for explanations. Got yourself a sub for it. 👍
Always appreciate your videos, thanks for sharing, I will definitely shout you out for this, and Everest Hernandez for teaching you. Keep it Growin' 💧
great video!! I also do my ph that way and learned it from everest as well. he is an awesome source of info for hydro growers
Never knew that! Thanks for the tip brother. Keep the tips coming 👍👍
Ahh I’ve been doing that often wondering “is this acid destroying the nutes with that cloud?”
Thank you
i have been adding ph up with no change all morning thx
i could see diluting the mixture so as to mix the mixture in small amounts to get to your target, but you just poured the whole thing in... you can just add a few drops at a time to the primary container at that rate... but let me say to anyone who thinks they can bypass ph testing. you can't... and if you're doing hydroponics you MUST check daily because the plant will really mess with the ph balance depending on where it's at in its growth and nutrient needs.
I am new to cannabis cultivation and I am in the process of learning how to grow. So far, I have decided to grow autoflowers in coir mixed with 15% perlite and with granular organic fertilizer. Just recently, I've learned of the importance of pH.
I am on well water and had it laboratory tested about 7 years ago. It showed that I had a pH of 7.17 which I understand is far too alkaline for growing in a soil-less medium. I'm assuming this number hasn't changed significantly so apparently I have to bring the pH down to around 5.8 or slightly lower. While I understand how to do this, my problem is in finding good, objective information as to which particular pH meter I should purchase.
The most consistent and credible information is that the cheap meters aren't worth purchasing. The reviews of the cheaper units on Amazon seem to support this.
I noticed that you are using an Apera p60 which happens to be one of the two that I'm considering. The other is the Bluelab BLU2210 pH Pen. The most significant difference between the two (in my opinion) is that you can purchase a replacement probe for the Apera but not the Bluelab. I have no idea if this is an important consideration.
I'm hoping that you could provide me with your recommendations.
I've watched many of your videos and find them extremely helpful. Thanks for your efforts. Cheers.
The yellow one you see on Amazon will actually do the trick I use it with no problem just calibrate it when you first get it.
The hannah gro line waterproof meter is also great, so is the waterproof ppm meter.
Blue lab iv used my truncheon for 15yr now
This is incredibly helpful and the first time I’ve heard this thank you
Comment 420 yaaaaaa
so easy it just might work, GR8 info bro.
Gosh, I really wish I could talk to somebody about acidity and pH. What I would like to know is, do I need to start balancing my pH before I pour Foxfarm into soil or should I just follow the recommended chart regardless of how high my pH gets because my babies seem to keep disintegrating every time I does, even when I dial it back. It’s just a conundrum to me and I don’t want to mess up and I wanna get this figured out and how to convert fox farms for soil has been a journey; most definitely switching to Hydro in the next few years when I can afford it.
Sure glad I came across this. Great info brother good to know. Sending sum love from Alabama ❤❤❤
Hellz yeah brother been researching around the clock for quite some time and never have never heard about this hack or pre-diluting your ph up and down before adding to your nutrient solution!👍 So kind of just stating the obvious here but if your just ph'ing your water without any other nutrients involved theres obviously no need for this ......correct!?!?👍
@@hlaw2830 ah you must be one of them grow know it alls huh! Or you just have no friends or no one else to argue with so you resort to trolling people in the comments section, damn clown!✌💯
@@hlaw2830 its comments like that, that just makes it more obvious your a failure.....Son!💯💯
@@hlaw2830 deeeeeezzzzz nutz!!!
Cheers mate.. notice that same white streak in my last 2 mixers n both got a bit frothy. I know y now. 👍🙏🇦🇺
Interesting bro.Thank you for sharing this.
Yooooooo this was hella useful I didn’t know this sheeeesh brotha thank you 🙏🏼
Always good advice, love this guy.
Really awesome information this is great stuff love the channel
Had no clue about this. Thank you!
Potassium silicate is what I use as PH up, plants love potassium in flower and silicate is beneficial.
Any suggestions for a ph down?
@@ok88warrior I use phosphoric acid that I get at my local grow shop.
I use this because the plants can use the phosphorous as it is the P in NPK
hopefully its goin in first
@@mobeus84 to use as PH adjuster just dilute it with water first and add slowly while mixing.
Wow thanks for sharing this. I was recently wondering why this was happening to me when i added ph up. I was also having problems with magnesium and calcium with perfect watering of 6.3 soil grow. I think this is gonna solve my problem!
3 rd time watching this video this week I’m trying to enforce this n not forget it !
I use lemon juice and baking soda to adjust my ph when using organic liquid feed.
Nice video thank you for the PH dillution tip. I think it depends what kind of nutrients you are using - many nutrient lines have a certain way you add the nutrients to prevent any chemical response. Fox Farm is one of those brands along with Grotek I have had no issues using direct PH down with. With compost teas etc - like you said there will def be a reaction. Would introducing some of the compost tea into the water that you are PH downing in the cup make any difference? I guess it would let you see if there was going to be a strong reaction - just theorizing here.
That why every brand recommends to do not mix nutes from other different brands. I use biocanna nutes with terra soil, dont check the ph always get 1g per 1 watt. Not sure if changing nutes and method will result in a disaster
Chris, Love your work you have gotten me to do my own growing.
Your content is amazing on point material. Keep up the good work.
Have a Q? Can i pre mix my nutrients, molasses, recharge, etc. and save for future feeding and if so for how long can i store for.
GREAT info and video, thank you for the time and effort! Teach us:)
Good information thanks for sharing
does this happen with all nutrient brands.?
Excellent advice! Thank you.
thank you for informing .
please make more like this mistakes videos
What about using Vinegar to PH down? Is it safe?
Chris thank you for all info you give! I appreciate it so much!!!!
I’m glad you made this video I always wondered if it’s OK for the plants cheers
Thank you