I have been consuming your content for a while now, I appreciate the detailed information provided. I would like to propose that for such tutorials, you should kindly consider adding chapters for ease of consumption and better experience for your audience like myself. Much appreciation from Kenya. You are doing a great job, I will continue supporting you.
Well done bro. You mentioned you have to create a grid line and column before importing to ProtaStructure from Autocad. Is it same step as in Revit also. Cuz I don't know Autocad but revit.
Thank again for the video Sir. Can I request a video tutorial wherein the 2 sides of the building are restricted by the property lines. Thank you for your kind consideration.
Okay I will make a video on that. More information is that when a building is restricted by a property line, the part of the building that is affected mostly is the Foundation and the Roofing. So with this your choice of foundation design along the property lines will change, that is to say the foundation around the property line will be designed in such a way that it will not encroach the other person's land or property. For this case Pad Footing can not be used for the foundation design on that area, the only foundation that will be used are Raft foundation, wide Strip foundation and Strap foundation (the best among all)
Hello Ekidel, Thank you for the good work. I would like to bring to your attention that the drawing you attached is not the same as the one used in the tutorial
Thank you for this correction, We will change the file link and attach the correct file link within 5 hours from now. But we also have the complete design video for the drawing file that you just downloaded, See the link to that video here: ua-cam.com/video/1l82p7I9m04/v-deo.html
Greetings Panari, I would like to inform You that the correct drawing file link for this design have been attached on the description of this video, you can check it out. Thanks
@@EkidelCAD Also I found something out sir, I found out on that prota 2022, we can actually import an external references drawing separately for different story (I mean we can have two separate dxf file for different story) ....I tried it I think it's more easy than superimposing one story on another in autocad.... although I used the same grid line for the ground floor...so as to ensure general accuracy of the drawing plan
May Almighty God rewards you sir for providing the plan, ❤
I have been consuming your content for a while now, I appreciate the detailed information provided. I would like to propose that for such tutorials, you should kindly consider adding chapters for ease of consumption and better experience for your audience like myself. Much appreciation from Kenya. You are doing a great job, I will continue supporting you.
Thank you for your kind comment ❤️. Also advise will be adhered. Thank
You are doing well sir, more grace
Thank you sir for providing the plan
A very big thanks
👍
Weldone engr.
Thank you
Hello sir,
Are the first beams you created the ground floor beams?
Yes, correct
❤good presentation love it
😊
sir, pls is this value u input in the cantilever load is it fixed for all cantilever?
Yes for all Building that has it's upper floor height as 3m to 3.5m. use the cantilever load to be 9.81KN/m
Can the top floor beams support roof/rafter despite not including the load?
Well done bro. You mentioned you have to create a grid line and column before importing to ProtaStructure from Autocad. Is it same step as in Revit also. Cuz I don't know Autocad but revit.
Thank again for the video Sir. Can I request a video tutorial wherein the 2 sides of the building are restricted by the property lines. Thank you for your kind consideration.
Okay I will make a video on that.
More information is that when a building is restricted by a property line, the part of the building that is affected mostly is the Foundation and the Roofing.
So with this your choice of foundation design along the property lines will change, that is to say the foundation around the property line will be designed in such a way that it will not encroach the other person's land or property. For this case Pad Footing can not be used for the foundation design on that area, the only foundation that will be used are Raft foundation, wide Strip foundation and Strap foundation (the best among all)
@@EkidelCAD Thank you so much. Hoping for that video.
Hello Ekidel, Thank you for the good work. I would like to bring to your attention that the drawing you attached is not the same as the one used in the tutorial
Thank you for this correction, We will change the file link and attach the correct file link within 5 hours from now.
But we also have the complete design video for the drawing file that you just downloaded, See the link to that video here: ua-cam.com/video/1l82p7I9m04/v-deo.html
Greetings Panari, I would like to inform You that the correct drawing file link for this design have been attached on the description of this video, you can check it out. Thanks
@@EkidelCAD Greetings, Ekidel, Thank you very much I have been able to download. Appreciated.
Also bro. What of the continuation of the Beam detailing.
Thank you Sir
Sir please can we get a tutorial on how to create this floor plan??
Do you mean a tutorial on how to draw a building Floor plan using AutoCAD ?
Sorry I want to ask is it ok to run a 150mm wall column and beans on prota
No it's not
Besides can we not perform the general arrangements in prota structures...which one saves time and which one is more easy
AutoCAD GA is more accurate
@@EkidelCAD thank you sir 🙏
@@EkidelCAD Also I found something out sir, I found out on that prota 2022, we can actually import an external references drawing separately for different story (I mean we can have two separate dxf file for different story) ....I tried it I think it's more easy than superimposing one story on another in autocad.... although I used the same grid line for the ground floor...so as to ensure general accuracy of the drawing plan
What do you think about it sir
Hello Ekidel,may I request on a guideline on how you can import drawing from Archicard to Protastructure to design, kindly
You will first export it to AutoCAD from ArchiCAD before you can export to Protastructure.
Thank you sir, after importing my dxf file into prota structure , the software tells me my file is open but I can't see my reference drawing
Chat me on whatsAPP +2349168891533