@@nashsummers8050 As of right now, they can both spin by hand. I had some debris in one but got it cleaned out. How do you adjust or check the tensioner? I replaced both belts because the pump drive belt kept slipping off when I mowed up an incline. The last time it slipped it got caught in the deck drive belt and tangled them both and they broke. I’m wondering if the replacement belt is too long because it’s an aftermarket belt. Thanks for the help. I appreciate it.
@@nashsummers8050 I figured it out. The problem was the tension pulley . It didn’t have a good lip on the back side so the belt just kept slipping off. This is probably what caused the whole problem to begin with. So I would say, if your pump drive belt is slipping off then check the tension pulley too. I need to replace it but for today I just turned it around and put the better side toward the front of the mower. It worked! Thanks for your helpful video and replies. Good work.
Why would you not drain old oil and hydraulic fluid if you are charging the filters. Waste of money towards filters if you are not refreshing with new oil and hydraulic fluid after draining. Otherwise great job! 😊
You're the best! Great balance with No non essential comments. Thank you!
Cyndi Jun 21 2023
Keep going man! Really enjoy your videos!
Very well done, thanks for your efforts
Great video. Thank you.
Thank you. Very good video👍🏼
Excellant video. Thank you
Awesome video man, this was a perfect guide to touch up this model
Why didn't you change the hydro fluid, why the new filter then, no new fluid ??
I replaced both of these belts today. The pump drive belt slips off almost immediately. Any advice? Thanks!
Matt do both of your pumps spin when the belt of off? Maybe one is locked up and the belt gets spun off? Is the tensioner tight?
@@nashsummers8050 As of right now, they can both spin by hand. I had some debris in one but got it cleaned out.
How do you adjust or check the tensioner?
I replaced both belts because the pump drive belt kept slipping off when I mowed up an incline. The last time it slipped it got caught in the deck drive belt and tangled them both and they broke.
I’m wondering if the replacement belt is too long because it’s an aftermarket belt.
Thanks for the help. I appreciate it.
@@matthewworkman7560 is the spring tight on the tensioner? It’s a pretty simple set up can’t think of anything else that could be wrong.
@@nashsummers8050 I figured it out. The problem was the tension pulley . It didn’t have a good lip on the back side so the belt just kept slipping off. This is probably what caused the whole problem to begin with. So I would say, if your pump drive belt is slipping off then check the tension pulley too. I need to replace it but for today I just turned it around and put the better side toward the front of the mower. It worked! Thanks for your helpful video and replies. Good work.
@@matthewworkman7560 awesome glad you are back up and going. Appreciate ur comments hope you have a blessed day!
Why would you not drain old oil and hydraulic fluid if you are charging the filters. Waste of money towards filters if you are not refreshing with new oil and hydraulic fluid after draining. Otherwise great job! 😊
I stand corrected. You mentioned you very briefly! My apologies! God bless!