In this video series, we will cover how to run and maintain a GF AgieCharmilles Cut 200 SP wire EDM machine, as well as how to program it using ESPRIT. www.romela.org/
Hello bro, I am a wire erosion professional for 15 years. I have been dealing with technical service for the last 7 years, the robofil series and charmilles are a beautiful machine and they are very popular in Turkey, but they can cause ridiculous malfunctions, and I used sodick in wire erosion :)
Hello friend, when I finished the maintenance on the lower head there was a problem the wire became vibrating and the machine stopped and it appeared on the screen ( wire broken) even though the wire is not broken
@@whatsonh5737 help me bro , Power value increases wire is broken what next bro ?but power value 10 to decreased run the wire normally not broken help me
I think they say these parts shouldn't be cleaned with anything but water, but I sometimes soak some parts in Janitol Altrans (Acidic cleaner) 🤭. Takes the dirt right off, but you have to rinse thoroughly. You get a sticky residue if you don't.
You just have to bleed the system. There is 2 small screen by the contact guide. Losses it while feed is on. Wait until all air purges out. And retight.
@@humanfactors143 indeed I always try turning on rollers to help evacuate more air, but still after doing maintenance I receive lower pressure alarm which forces me to clean the Hydrtrex filter cartridge in the back or change in when it’s still has plenty of life left
Hello bro, I am a wire erosion professional for 15 years. I have been dealing with technical service for the last 7 years, the robofil series and charmilles are a beautiful machine and they are very popular in Turkey, but they can cause ridiculous malfunctions, and I used sodick in wire erosion :)
How the U V Z axes are activated in the 390 model
How the U V Z axes are activated in the 390 model
what year is that machine please
Hello friend, when I finished the maintenance on the lower head there was a problem the wire became vibrating and the machine stopped and it appeared on the screen ( wire broken) even though the wire is not broken
pinch rollers are not tight enough (adjust spring pushed by screw)
Hi dear
Can give your email
How change the battery
@@whatsonh5737 help me bro , Power value increases wire is broken what next bro ?but power value 10 to decreased run the wire normally not broken help me
How the U V Z axes are activated in the 390 model
how wire breaking was canceled? if there is a video how can i get it ?
How the U V Z axes are activated in the 390 model
Hello each time i have to rewired by hands the wire doesn't thread automatically and the wire breaks please answere
Great video
Thank you so much for these informative video
How the U V Z axes are activated in the 390 model
Do you have a user manual for me?
How the U V Z axes are activated in the 390 model
How change ghe battery
How the U V Z axes are activated in the 390 model
More learning video plz, I'm waiting to learn more . tnx bro
How the U V Z axes are activated in the 390 model
hello sir, I don't know exactly, cause I'm just working with (CUT 300 sp) .
thanks
I think they say these parts shouldn't be cleaned with anything but water, but I sometimes soak some parts in Janitol Altrans (Acidic cleaner) 🤭. Takes the dirt right off, but you have to rinse thoroughly. You get a sticky residue if you don't.
likely you are dissolving the plastic(residue)
How the U V Z axes are activated in the 390 model
I'm Maintenance in all Machine
çok teşekkür ediyorum
Anyone have a problem with low pressure in lower head after maintenance?
me the wire dont goes out and the pressure water is low
You just have to bleed the system. There is 2 small screen by the contact guide. Losses it while feed is on. Wait until all air purges out. And retight.
@@humanfactors143 indeed I always try turning on rollers to help evacuate more air, but still after doing maintenance I receive lower pressure alarm which forces me to clean the Hydrtrex filter cartridge in the back or change in when it’s still has plenty of life left