Magic Switch Box!
Вставка
- Опубліковано 11 жов 2024
- In this tutorial I present to you the construction of a magic box that you can present to your colleagues or friends, having a special impact on them!
Once again, I apologize for the low level of speaking English,so please be lenient, I promise to improve myself ,being the first time I speak in front of the camera!
During the demonstration, keep calm and leave sufficient breaks between movements, especially when reset times are necessary as you will see below. How does it work?
1. Whenever the device is powered, (always with the switches in the "off" position), it starts in the learning sequence, starting from LED 1. Place the colored cards in any order you want. One color for the LEDs and one for the switches.
Turn on the switches starting from LED color 1 in order up to LED 4. Turn on the corresponding color switch from LED no.1. For example, if led no. 1 has a red card, turn on the switch with the same color first. Next is the color from led no. 2, we turn on the switch with the same color. Then in order 3, 4, following the colors. It is always learned starting from led no.1...4. At this moment the buttons are "learned"and each one will light up in correspondence with the corresponding colored card, and you can turn them off or on in any order you want. If switch No. 1 is switched last to the "off" position and is held in this position for 3 seconds or more, the device enters the learning process again.Move the cards in any order you want, the learning process begins again, and the spectators will be amazed how the lights turn on in a different order.For a successful show, move the cards to the LEDs and to the switches, ask one of the spectators to place them in any order they want. You will be amazed to see how each color on the switch will turn on the corresponding light of the switch color, changing the order.Amazing, right?
Before moving on to trick no. 2, turn off switch no. 3, the last one, and wait 3 seconds or more. Let's go to trick no. 2
2. If switch no.3 is turned off last and is kept in the off position for 3 seconds or more, the device goes to trick number no.2. Keep any of the switches off for 4 seconds or more and it becomes inactive. Switch back to the off position and wait 4 seconds or more, it becomes active again. Attention: at this moment of the demonstration, at least one of the switches must be in the "on" position
Turn the switches on and off a few times. Leave one of them, any one, in the "off" position and the other 3 in the "on" position. Wait 4 seconds or more, during this time remove the colored cardboard either from the switch or from the corresponding color LED. Put the switch in the on position, and the LED will stop lighting up. Spectators will see that if the color is missing, the LED does not light up. Amazing, right? Let's move on: put the switch in the "off" position again, wait 4 seconds or more, during which you talk to the spectators and put the colored cardboard back. Turn on the switch and amazingly, the light will come back on! The effect is maximum! Practice until you turn off 3 of the lights, turning off the switches in turn and removing the colored cards.
Turn the last switch to the "off" position. Remove the colored cardboard. At this moment, none of the LEDs will light up. Turn all the switches to the "on" position and move on to trick no. 3!
3. Turn all 4 switches to the "off" position, wait 5 seconds and the device locks in sequence 1234. You can light the LEDs in any order you want, but only with the switch assigned in front of it, during which you place the colored cards of the LEDs and switches in the same order. The color of led no.1 should be the same as that of switch no.1, the color of led no.2, the same as that of switch no.2, ....and so on until led no.4
At this moment you can hand the device to the audience you are giving the demonstration to. It is blocked and can no longer enter any programming sequence and behaves normally like a classic circuit.
4. To unlock, you can remove the battery or turn switch no. 2, 5 times or more consecutively from the off/on position. The other switch must be in the off position. At this moment, the device is active again in switch learning positions.
If you want to support my channel, don't forget to subscribe, thank you!
Code, schematic: www.instructab...
Visuino program : www.visuino.co...
Another channels with Visuino and Arduino project: / @visuinoprojects
Visuino creator's channel: / @boianmitov
Very cool! You got me with this one... 😀For a while, I believed in the magic! 🙂
@@BoianMitov 😀Thank you!
@@CompactDiy You are Welcome! 🙂BTW: Your voice is not bad at all 🙂You just need some practice! 🙂I also added the video to the rest of your projects on the Wiki page 🙂
@@BoianMitov I speak a little better, but I had some emotions for the first time, I will only post with my current voice, so I can practice. Thank you for your support!
Your English is great!
@@visuinoprojects I speak a little better, but because of my emotions and haste, I have mispronounced. I promise to improve, thank you for your support!
Very cool project!
This is the first video I found by you, so I have no idea what your videos sounded like before... However I kind of know what your talking about from other channels. Honestly... I don't know why non English speakers who actually know enough to get by don't even try to narrate their OWN videos and go with AI and such. As an American I ONLY speak English and I found you to be quite understandable!! Please do not be ashamed or embarrassed by not having a full command of this incredibly difficult language (or so I am told, for me it was the easiest one I ever learned LOL) I truly enjoy listening to accents from across the world! To be honest, doing the video's in your own voice gives them a more honest and genuine feel. Stick with your voice and you won't have many complaints except for those who ONLY complain. Great job!!!
I've never spoken in front of someone or in front of a camera, it's the first time... Only what I know from movies and videos. I will try to post only with my voice, I am trying to improve my English. Thanks for the appreciation!
Well done with the trick. And also well done with your English, I prefer your English to a dreadful computer voice any day 🙂
@@richardhince9764 thank you!🥰
Sir plz tutorial
read the description
@@CompactDiy thank you sir