What a beautiful collection. I wish Beretta would make their 84 Cheeta 9mm because I like that size for carry better. The 92 style pistol is one of the best looking handguns ever made in my opinion.
I installed stainless steel in my PX4 compact and my PPQ I ordered the stainless steel for my PPQ before I got the pistol, my 92x came with metal guide rod. My wife and I shot it I fucking love it. I'm a lefty so I tried to switch the magazine release button on my 92x but I'm not handy to do it myself my wife brought it to a gun store and he fixed it free.
Great video and very good choice of upgrades to the 92 series. I do similar upgrades to my trio of Beretta's. There's nothing wrong with a stock Beretta but the metal parts just make the gun run smoother. I have found that 14 lb hammer spring is the sweet spot that will 100% pop any primer. I used to use the 13 lb on my LTT and M9A1 and I would get light primer strikes with NATO ammo (tends to have harder primers). A few holster suggestions are JM Custom Kydex for IWB, AIWB or OWB w/light. Phlster Floodlight is a good option too because it fits almost any gun according to the weapon light you're using (X300 or TLR-1) for carry. If you're looking for a duty holster with retention there is US Duty Gear Holsters. And lastly, there is ebay which you can find surplus Safariland SLS holsters for 92 series w/weapon light.
Since I made this video, I traded in my M9 for a 92G Elite LTT. My Elite has the Langdon trigger job with a 13# hammer spring and a 14# recoil spring. My M9a1 has also the Langdon trigger job in a bag, houge piranha G10 grips, 14# recoil spring and a 13# hammer spring. My M9a1 compact has also changed a little bit, I put LTT ultra thin G10 grips and stainless steel grip screws, and a stainless steel trigger. I also put the Wilson Combat mag guide on all three. I have to check out those holsters.
@@jimh4949 I have the TJIAB with optimized trigger bar on my 92x compact that I recently installed. I'm going to try it with the 13lb hammer spring with various ammo types and see if it runs reliably. If so, I'm keeping it because the DA and SA with the trigger job is so good. BTW it's a good option to go for full size holster because they will generally fit the centurion/compacts.
I don’t understand the question, the parts are the same for 92FS, M9, M9a1, 92G Elite LTT, M9a1 compact. The Elite LTT uses a Vertec slide, so to can can change the front sight out. The only one that is somewhat different is the 92a1. The M9a1 compact does take a different recoil spring and the lanyard loop is shorter. Wilson Combat and Langdon Tactical sells parts for these pistol, and the M9a3 and the new 92X.
@@jimh4949 so im getting an m9a1 full size and im not sute what series parts fit in it because its going to be a duty gun so i want to work very well if i ever need to use it
@@Juribe17 here is everything I did to mine. I put the Wilson Combat Duty Spring Kit and mag guide in it. Then from Beretta, I put extended mag release, Stainless Steel guide rod, Elite hammer, the decocker kit,(G Conversion kit), Houge G10 piranha grips. All these parts are for the 92FS,M9, M9a1, M9a1 Compact. Just look for the 92 series parts. For my front sight, I took Orange model paint and filled in the white dot. I also running a TRL-1s weapon light. Out of the Wilson Combat spring kit I’m using the 14# Recoil spring and the 14# hammer spring. I hope this helps.
What a beautiful collection. I wish Beretta would make their 84 Cheeta 9mm because I like that size for carry better. The 92 style pistol is one of the best looking handguns ever made in my opinion.
I installed stainless steel in my PX4 compact and my PPQ I ordered the stainless steel for my PPQ before I got the pistol, my 92x came with metal guide rod. My wife and I shot it I fucking love it. I'm a lefty so I tried to switch the magazine release button on my 92x but I'm not handy to do it myself my wife brought it to a gun store and he fixed it free.
I definitely recommend a LTT optimized trigger bar. It makes a huge improvement on the reset.
Great vid. I love my 92x typeG full size and px4 storm typeG. All great components you picked out
Very nice!
Since this video, I traded my 92 FS/M9 in on a 92G Elite LTT
they make flush 15 round mags for the compact
... made some nice changes I did too. Thx a lot for this video.
Thank you, I suck at making videos and I’m glad you like it
.... all good; well done
@@eddieworks69 thank you
Great video and very good choice of upgrades to the 92 series. I do similar upgrades to my trio of Beretta's. There's nothing wrong with a stock Beretta but the metal parts just make the gun run smoother. I have found that 14 lb hammer spring is the sweet spot that will 100% pop any primer. I used to use the 13 lb on my LTT and M9A1 and I would get light primer strikes with NATO ammo (tends to have harder primers).
A few holster suggestions are JM Custom Kydex for IWB, AIWB or OWB w/light. Phlster Floodlight is a good option too because it fits almost any gun according to the weapon light you're using (X300 or TLR-1) for carry. If you're looking for a duty holster with retention there is US Duty Gear Holsters. And lastly, there is ebay which you can find surplus Safariland SLS holsters for 92 series w/weapon light.
Since I made this video, I traded in my M9 for a 92G Elite LTT. My Elite has the Langdon trigger job with a 13# hammer spring and a 14# recoil spring. My M9a1 has also the Langdon trigger job in a bag, houge piranha G10 grips, 14# recoil spring and a 13# hammer spring. My M9a1 compact has also changed a little bit, I put LTT ultra thin G10 grips and stainless steel grip screws, and a stainless steel trigger. I also put the Wilson Combat mag guide on all three. I have to check out those holsters.
@@jimh4949 I have the TJIAB with optimized trigger bar on my 92x compact that I recently installed. I'm going to try it with the 13lb hammer spring with various ammo types and see if it runs reliably. If so, I'm keeping it because the DA and SA with the trigger job is so good.
BTW it's a good option to go for full size holster because they will generally fit the centurion/compacts.
Help TAPClip recommends a pocket holster that can be used with the M9A1 that has a flashlight attached.
I use M9A1.
Which series parts can be used for the m9a1??
I don’t understand the question, the parts are the same for 92FS, M9, M9a1, 92G Elite LTT, M9a1 compact. The Elite LTT uses a Vertec slide, so to can can change the front sight out. The only one that is somewhat different is the 92a1. The M9a1 compact does take a different recoil spring and the lanyard loop is shorter. Wilson Combat and Langdon Tactical sells parts for these pistol, and the M9a3 and the new 92X.
@@jimh4949 so im getting an m9a1 full size and im not sute what series parts fit in it because its going to be a duty gun so i want to work very well if i ever need to use it
@@Juribe17 here is everything I did to mine. I put the Wilson Combat Duty Spring Kit and mag guide in it. Then from Beretta, I put extended mag release, Stainless Steel guide rod, Elite hammer, the decocker kit,(G Conversion kit), Houge G10 piranha grips. All these parts are for the 92FS,M9, M9a1, M9a1 Compact. Just look for the 92 series parts. For my front sight, I took Orange model paint and filled in the white dot. I also running a TRL-1s weapon light. Out of the Wilson Combat spring kit I’m using the 14# Recoil spring and the 14# hammer spring. I hope this helps.
@@jimh4949 got it thanks
I would like to have a flashlight in your country. Is the flashlight expensive?
Not really, it depends on the one you get
How do you wear your holsters I wear mine appendix and do you prefer leather or kydex ?
I carry at the 3 or 4 O’clock position with kydex