fuji electric vfd prameter list के साथ setting program सिखे|
Вставка
- Опубліковано 6 лют 2025
- #Fuji electric vfd parameter list के साथ sitting सिखाए
#Fuji vfd parameter setting
#fuji
#fuji vfd
#fuji inverter
#fuji frenic
#fuji drive parameter setting
#fuji electric
#setting up a fuji drive
#fuji drive terminal wiring
#fuji control wiring
#fuji frenic mini
#fuji parameter
#fuji frenic mega
#Fuji vfd programming
Hamare Ruchi electrical me apka swagat hai 🙏
electrical se relative sabhi prakar ki video hamare channel per mil jayegi.( Electrical tips and tricks}
1) electrical and electronic video
2) Switchgear department related video
3) all types of control panel
4) all types of Ats panel (auto transfer switch)
5) all types of VFD waring testing drawing settings programming.
6) all types of moter connection testing drawing
7) plc panel waring testing setting programming.
8) all types of analog timers and digital timer
9) electrical house waring relative video
10) synchronized panel
11) all types of starter panel.
12) generator waring testing drawing
13) all types of pnel board as for example.
( Db.smdb.mdb.lv panel.capaciter panel.control panel.plc panel.sygronizing panel.vfd panel.moter controllers.
14) all types digital meter settings programming
15) electrical video
16) electrical daigram related video
17) @ruchi electrical
18) electrical panel board
19) electrical channel hindi
20) electrical and electronic channel hindi
21) electrical waring daigram
22) electrical control panel waring daigram
23) electrical and electronic
24) Ro water purifier installation
25) ro water purifier system
26) ro repair in home
27) solar panels
,page, / ruchi-electrical-10244...
UA-cam channel link. / @ruchielectrical
/ @ruchielectrical
Twitter account
As...
Digitalweekly timer • Mastering Your Micron ...
DOL starter power and control daigram
• Ultimate guide to DOL ...
Relay waring testing drawing,
• How to Wire a 14 Pin R...
Kw to amps.
• Converting HP to Amps ...
Kw to amps (1phase and three phase)
Hp to amps full yek video me
• Convert KW to Amps wit...
Intermmidiate switch ,3way switch
• Master the Intermediat...
Socket panel waring
• Ultimate Guide to Indu...
Rotary switch cum changeover switch waring connection testing kaise kare
• The EASIEST Way to Wir...
Mail business and sponsership
Ruchielectricalbusiness@Gmail.com
Personal contact details.
+919162545508 (Whatsapp)
Very useful electric vfd video thanks 🙏
So nice of you
Very informative video vfd setting program ❤❤
Many many thanks
❤❤ super knowledgeable sir
So nice of you
बहुत अच्छा और सरल
Great sir vfd man 👨
Nice ❤ one
Thanks 🔥
Can u share us a Video on Legend plates making process
Hi
Sir agar meri motor ka rpm jada h to kya pole. Bdlne pe speed change ho jayega ?
Nahi
Hi dear, can u share me the way make these legend plates
Coming soon
Erd ka alarm aa raha hai sir kya problem ho sakti hai
Erd error Step-out detection (for drive of permanent magnet synchronous motors)Problem The step-out of the PMSM was detected.
Possible Causes
(1) Mismatch with the
characteristics of themotor.
(2) Starting torque wasinsufficient.
(3) Load is light.
(4) Control system notstabilized.
What to Check and Suggested Measures
Check whether the settings of F04, F05, P02, P03, P60, P61, P62,P63 agree with the motor parameters.
→ Set the motor parameters to those function codes.
Check the settings of the acceleration time (F07, E10) and thereference current at starting (P74).
→ Change the acceleration time to match the load.
→ Increase the reference current value at starting.
→ Set the holding time of the starting frequency 1 (F24).→ Set the S-curve (H07 = 1 or 2).
→ Increase the control switching level (P89).
Check the setting of the reference current at starting (P74).→ Decrease the reference current value at starting.
Set it to 80% or lower when running a motor alone in a test run
etc.
Check the settings of the armature resistance of PMSM (P60) andthe V/f damping control compensation gain (P91, P92).
→ Adjust the armature resistance of the motor.
→ Adjust the settings of the compensation gain (P91, P92).
: एर्ड त्रुटि स्टेप-आउट डिटेक्शन (स्थायी चुंबक सिंक्रोनस मोटर्स की ड्राइव के लिए) समस्या पीएमएसएम के स्टेप-आउट का पता चला था।
संभावित कारण
(1) के साथ बेमेल
मोटर की विशेषताएं.
(2) स्टार्टिंग टॉर्क अपर्याप्त था।
(3) भार हल्का है।
(4) नियंत्रण प्रणाली स्थिर नहीं है।
क्या जाँच करें और उपाय सुझाएँ
जांचें कि क्या F04, F05, P02, P03, P60, P61, P62, P63 की सेटिंग्स मोटर मापदंडों से सहमत हैं।
→ मोटर पैरामीटर को उन फ़ंक्शन कोड पर सेट करें।
त्वरण समय (F07, E10) की सेटिंग्स और प्रारंभ में संदर्भ धारा (P74) की जाँच करें।
→ लोड से मेल खाने के लिए त्वरण समय बदलें।
→ प्रारंभ में संदर्भ वर्तमान मान बढ़ाएँ।
→ प्रारंभिक आवृत्ति 1 (F24) का होल्डिंग समय निर्धारित करें। → S-वक्र (H07 = 1 या 2) सेट करें।
→ नियंत्रण स्विचिंग स्तर बढ़ाएँ (P89)।
प्रारंभ में संदर्भ धारा की सेटिंग की जाँच करें (P74)।→ प्रारंभ में संदर्भ वर्तमान मान घटाएँ।
परीक्षण के दौरान अकेले मोटर चलाते समय इसे 80% या उससे कम पर सेट करें
वगैरह।
पीएमएसएम (पी60) और वी/एफ डंपिंग नियंत्रण मुआवजा लाभ (पी91, पी92) के आर्मेचर प्रतिरोध की सेटिंग्स की जांच करें।
→ मोटर के आर्मेचर प्रतिरोध को समायोजित करें।
→ मुआवज़ा लाभ की सेटिंग समायोजित करें (P91, P92)।
In VFD after off the VFD it showing 0U2 on display and VFD going to Trip mode. How to solve the problem please explain sir
Overvoltage protection alarm
Go to prameter p6 -10 set actual voltage
Sir jo note banaye hai uska pdf chahiye
Video dekh ke note kar lijiye one by one
Pdf kidher hai malum nahi.milega bhej dunga
Sir baar baar ...High voltage below 440.and OH1 error aa rha h... motor rukk jaati h...😢😢😢
Apake building me capacitor panel laga hua h ki nahi.
Apka input voltage stable nahi hai.
App yek kam kijiye. Kamti voltage set kijiye.
400v to 380v ok
Vfd stop karte samay zero ho jana aur start karte samay zero se start ho parameter no sir
Aap video dekh ke jog frequency set kar lo .phir apka vfd 0 se start hoga aur 0 stop hoga ok
@@Ruchielectrical video link
@@Ruchielectrical sir hamko jog mode me nhi chalana hai
Phir aap minimum frequency jo. Hai 50hz.set kar lijiye
Dusra multispeed ka yek terminal use karke frequency 50hz set kar lijiye
Apko kaun sa vfd ka problem aa Raha h
H61 UP/DOWN control (Initial
frequency setting)
0: Initial value is 0.00 Hz (G1S compatible operation)
1: Last UP/DOWN command value on releasing the run command.
2: Initial value is 0.00 Hz.
3: Initial value is frequency set with UP/DOWN command immediately before
3 wire run command parameters
Waring daigram dekhiye please
Esi video me bataya hu ji
Bro app ke namber send karo please
Video ke description me hai
Sir mujhe number send kariye sir
Video discretion me no. H