Great work. I am using scythe from 12 years,and know all,how to prepare to work,and work with it. We have long winters,cows, horse's,need a lot work with scythe. And your scythe need some remakes. Sorry for my English,can't explain what is wrong. May be just European scythe is different.
Easy, slow, few centimeters at once .. The correct scythe design is necessary and the gras have to be wet and cold (it's early morning work).. ua-cam.com/video/jLYgDd292as/v-deo.html
Like to see how good it works in a field of wheat or barley or something like that. I would love to have some of his tools he creates. He makes it look so easy forging tools and blades but I'm sure it probably vary difficult. He is an artist in his own right to form and make something so useful from our scrap metal waste.
السَّلاَمَُ عَلَيْكُمْ وَرَحْمَةُ اللهِ وَبَرَكَاتُهُ Halo teman baruku! Terima kasih telah berbagi video Anda. Desain yang sangat baik. Semoga hari Anda menyenangkan dan bahagia! Salam 👍
Good work. I haven’t used a scythe in about 30 years. I think the angle of the blade is too open. It should work without effort. It’s like slicing bread - if you put the knife on top of the bread and press it’s hard work. But angle the knife with the tip down and slice and with a sharp blade it’s easy. I love the worksmanship anyway. Bravo!
First of all. Great attempt to remake a tool you don't have a fysical version in front of you to remake it from. Guessing you where going for an American style blade. So here is what i see is wrong with it from half the world away. Angel between tip of the blade and snath (wooden part of the handel) is to "open" (meaning to great) for cutting gras. I also think the angel between the flat side and the snath is to steep and that is why you dig the tip in to the ground a couple of times when you are ussing it. Since your snath appears to be a swiss model. The nib in your left hand is supposed to be horizontal not vertical with the top part towards you. Nib in your right had is suppossed to be toward you. Usualy the blade has raised ridge on the back side and on American scythes the back of the blade rides over the ground; On Austrian scythe blades they slide over the ground on the belly( Downward bulge smack in the middel of the blade) The blade it self is ground verry thin to slide better through the grass. It is not connected to the snath with a socket in general. There are different ways to manage this. In place off a socket they have a flat piece of steel with a ring around it and secured with a wedge or a half round ring with bolt(s) on the flat side that fits on the bottom. For this reason the connecting part af the snath is flat on the bottom. This way it becames a bitt adjustabel when mounting. As for the mowing it self. Keep the blade flat on the ground always. Make half circel cutting motions with the blad. Keep the blade sharp with a wethstone. Don't try to force it. Is is a subtle tool not a crude hacking tool. youtube is a great source for how to videos. Just search "Mowing with scythe" and you are bound to find a bunch. Hope it helps. And again: great work. Greeting from Belgium.
Кузнец как мастер хороший, но вот коса не удалась от слова совсем, и загиб не тот, и угол не подходящий. Видно что не косил ни разу и не знает технику в принципе.
Great work. I am using scythe from 12 years,and know all,how to prepare to work,and work with it. We have long winters,cows, horse's,need a lot work with scythe. And your scythe need some remakes. Sorry for my English,can't explain what is wrong. May be just European scythe is different.
Please give to me your scythe's picture. Thank you.
Easy, slow, few centimeters at once .. The correct scythe design is necessary and the gras have to be wet and cold (it's early morning work)..
ua-cam.com/video/jLYgDd292as/v-deo.html
Like to see how good it works in a field of wheat or barley or something like that. I would love to have some of his tools he creates. He makes it look so easy forging tools and blades but I'm sure it probably vary difficult. He is an artist in his own right to form and make something so useful from our scrap metal waste.
Ninja22,
This is one tool making man. If you can't find one, most likely he can make one for you. Thanks for sharing 🇺🇸🇨🇱😁👍
KK, you make it look so easy to make👍👍👍👍👍
Excellent work my friend, I am a fan of your work
Surely a master blacksmith at work.
Thank you so much I have been waiting for this
Buen trabajo maestro seguidor de sus trabajos que son arte muy bueno muchas gracias saludos de Colombia en la América del Sur
Muy buen trabajo 👍👌,quedó espectacular la guadaña , un amigo sierra ves me iso un cuchillo bowye con un sable de motosierra es un buen acero
السَّلاَمَُ عَلَيْكُمْ وَرَحْمَةُ اللهِ وَبَرَكَاتُهُ
Halo teman baruku! Terima kasih telah berbagi video Anda. Desain yang sangat baik. Semoga hari Anda menyenangkan dan bahagia! Salam 👍
Nice job man
Nice work on the knife bro 😍🤩 well done bro 😆😝😜😃😁👍👍💪💪💪💪💪👏👏🔪🔨🤗🤗
Experienced blacksmith......👍🏻
Great work
Got the swing of things, real quick. Need a goat for all your grass clippings. 🐐🤜🤛👍
Wonderful ,golden hand
great job
Sharp and wonderful, thanks
Many thanks!
Өтө сонун👍
احسنت شغلك رائع
Good job brother sent me one to Guatemala
Good work. I haven’t used a scythe in about 30 years. I think the angle of the blade is too open. It should work without effort. It’s like slicing bread - if you put the knife on top of the bread and press it’s hard work. But angle the knife with the tip down and slice and with a sharp blade it’s easy. I love the worksmanship anyway. Bravo!
Needs a different angle for the blade I think. Awesome work.
Thanks for the tip
me i know if what kind of grinding disc do you have sir?
Excelent
Muito bom
You also watched our own Manny Pacquiao, also a Filipino from Michigan USA.
Bang scythe nya dijual gak ?
🙋👉🙋
Hi good morning is there anyway that I can talk to you to place an order for a big knife
@2:15 good skill (and equipment) on the hollow handle!
Great tool.
Thank you forthe video.
🇬🇧👍
Glad you enjoyed it
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
You also watch Philippines boxing super star Manny Pacquiao 😂.. I'm Filipino bro
Make a draw knife plz
Plz one video plz
I think it might work better if you swing with your waste rather than swinging your arm because the arm angles the blade down into the dirt.
Thank you for your idea. It's the first time the blacksmith made and used it
👍👍
Very nice
Something from nothing again.
Need to make a yoyo now to cut
more weeds and grass
How to order
Boleh order ga om?
💙👍
👌👌💋🌹
កម្មង់ធ្វើបានអត់បង
🌅 Bodiya moja Mane soi 👷
Like your product would like to buy to try out for grass how can I order one a mobile no ect
this is a long and big one, it must be very difficult to ship. thanks for your interest.
😂 this is reinventing the scythe , but actually is not a scythe.... it is just a weird contraption that looks like a scythe.
👍👍👍👍⭐️⭐️⭐️⭐️⭐️❣️
เก่งจริงๆช่างทำได้ทุกอย่างเลยครับถ้ายุเมืองไทยผมจะสั่งทำมีดเดินป่าไห่ยุครับชอบมากเลยครับกดติดตามไห่แล้วนะ
នៅខេត្តណាដែរបង
បងធ្វើដាវមួយមកម៉ាន
ខ្ញុំចង់ទិញមួយ
I thing that's wrong direction of handle.
Brpa saya mau pesan satu
:)
ធ្វើត្រូវហើយពូប៉ុន្តែខុសមុខតិច មុខវាដូចកណ្ដៀវចឹង😀
អរគុណសម្រាប់ការផ្តល់យោបល់
The blade angle is too open.
thanks for your advice
brpa boss jual
$15 dijual di Kamboja
Sepertinya kepanjangan
itu benar
Это не коса разве так косят
I am from Russia and to be honest, such a braid is not suitable for work in a wheat field, and for ordinary grass, too
First of all. Great attempt to remake a tool you don't have a fysical version in front of you to remake it from. Guessing you where going for an American style blade. So here is what i see is wrong with it from half the world away. Angel between tip of the blade and snath (wooden part of the handel) is to "open" (meaning to great) for cutting gras. I also think the angel between the flat side and the snath is to steep and that is why you dig the tip in to the ground a couple of times when you are ussing it.
Since your snath appears to be a swiss model. The nib in your left hand is supposed to be horizontal not vertical with the top part towards you. Nib in your right had is suppossed to be toward you.
Usualy the blade has raised ridge on the back side and on American scythes the back of the blade rides over the ground; On Austrian scythe blades they slide over the ground on the belly( Downward bulge smack in the middel of the blade) The blade it self is ground verry thin to slide better through the grass.
It is not connected to the snath with a socket in general. There are different ways to manage this. In place off a socket they have a flat piece of steel with a ring around it and secured with a wedge or a half round ring with bolt(s) on the flat side that fits on the bottom. For this reason the connecting part af the snath is flat on the bottom. This way it becames a bitt adjustabel when mounting.
As for the mowing it self. Keep the blade flat on the ground always. Make half circel cutting motions with the blad. Keep the blade sharp with a wethstone. Don't try to force it. Is is a subtle tool not a crude hacking tool.
youtube is a great source for how to videos. Just search "Mowing with scythe" and you are bound to find a bunch.
Hope it helps. And again: great work. Greeting from Belgium.
Кузнец как мастер хороший, но вот коса не удалась от слова совсем, и загиб не тот, и угол не подходящий. Видно что не косил ни разу и не знает технику в принципе.
он пытается сделать это впервые в жизни
в любом случае спасибо за ваши идеи
@@AmazingKKDaily уважаю, мастер хороший 👍👍👍
Так она не косит, выкинь эту косу и купи нормальную.
мы просто пытаемся сделать его сами. на самом деле, мы не используем его в Камбодже
Туфта . Не коса . Косой косят , а не рубят траву .
честно говоря, мы мало что знаем об этом, так как не используем его в Камбодже. мы только пытаемся бросить вызов навыку