Cool and having the metal plate would make a more realistic diorama cause the figures won't be elevated from the scene. I'm try to figure out do they make any stands for 1/18 to make them look like they are flying . Like if they have her pack. Everything I look at seems to be for 1/6 or 1/12. I want my mandolorian figures to be elevated like flying in battle. Also I'd like to get magnets for the other figures than joytoy. I guess have to measure there holes. Thanks for great video
The figure stands for 4" Fortnite figures work perfectly for JoyToy figures! But admittedly, the Fortnite stands can look...a little goofy. On the other hand, they're readily available and usually pretty cheap on eBay.
I would warm up the feet and squeeze them a little to tighten the hole up, then insert the magnets! This will keep them in place without glue or anything. To remove them dust warm them up again!😁
I would warm up the feet and squeeze them a little, then insert the magnets, this will keep them in place! To remove them just warm up the feet again!😁
@@woodman29I've screenshot 9:05 of the video..where it shows the coin vs the magnet on the upper right corner.. it shows diameter is 3mm and thickness is 2mm.. also went on the Amazon link unfortunately they don't have 2mm x 3mm.. they have 3mm x 2mm though.. anyway this video is a very big help
![I'm learning to paint figures in 1/24. New from Masterbox Pоst-apocalyptic series [How I Do]](/img/n.gif)
Finally, I've been looking for a solution to this. Just ordered the magnets.
Glad I could help!
Excellent video and idea.
Thanks. I was trying to come up with a way to prevent them from falling over😀
artificial grass and metal plates and magnet pegs, thank you for the idea!!
My pleasure!👊😁
Thank you for the information. I can certainly use it.
My pleasure!
Clever sir!!
Lol ya I was stumped on figure stands for this line. This trick works great!!
@@woodman29 Heck yeah it did! I would have never thought of that.
Cool and having the metal plate would make a more realistic diorama cause the figures won't be elevated from the scene. I'm try to figure out do they make any stands for 1/18 to make them look like they are flying . Like if they have her pack. Everything I look at seems to be for 1/6 or 1/12. I want my mandolorian figures to be elevated like flying in battle. Also I'd like to get magnets for the other figures than joytoy. I guess have to measure there holes. Thanks for great video
My pleasure GREY CLOUDY DAY! Good luck!😁
The figure stands for 4" Fortnite figures work perfectly for JoyToy figures! But admittedly, the Fortnite stands can look...a little goofy. On the other hand, they're readily available and usually pretty cheap on eBay.
Thanks for the tip Kythera!!😁😁
@@woodman29 Glad to help, friend! ^_^
Protech AFS-2C stands also fit, with the caveat that it's a VERY snug fit.
@@kytheraofanevern great thanks
Got the 2x3mm magnets but they keep falling out what is a wider size?
3mm is the next size up!
Hi. Do these tiny magnets also work on Acid Rain figures?
Hi EPIFANIO! I’m not sure about the acid rain figures to be honest! I haven’t tried them on those figures!
@@woodman29 okay. Thank you for your quick response. I really appreciate it.
@@epifaniofelix1622 no problem
😎👍
✌️😁✌️
I ordered 2x3 magnets and they keep felling out the figure what should I do ???
I would warm up the feet and squeeze them a little to tighten the hole up, then insert the magnets! This will keep them in place without glue or anything. To remove them dust warm them up again!😁
I would warm up the feet and squeeze them a little, then insert the magnets, this will keep them in place! To remove them just warm up the feet again!😁
Is it diameter 3mm and thickness 2mm?
It’s 2mm diameter. By 3mm thick! Hope this helps MARC!
@@woodman29I've screenshot 9:05 of the video..where it shows the coin vs the magnet on the upper right corner.. it shows diameter is 3mm and thickness is 2mm.. also went on the Amazon link unfortunately they don't have 2mm x 3mm.. they have 3mm x 2mm though.. anyway this video is a very big help
@@DaddyDawgIbasco sorry for the confusion MARC I was going to double check when I got home but looks like you figured it out😁😁
@@woodman29 no worries your video provided solution to our very long time problem hahahaha
@@DaddyDawgIbasco glad the tip helped!
Are you sure about the size because I bought some and they are too small ? Another UA-cam person said use 3 X 2 mm 🤔
I can only comment on what worked for me as I showed in the video. I used 3x2mm as shown My apologies if your didn’t work out!
Those joytoy stands at the beginning don't really fit them either. I have those.
True. Hopefully these magnets help you!
I use Fortnite stands for joytoy figures. The only downside, they just have one peg.
Nice. I don’t collect Fortnite. But this is good to know! Hopefully the video helped!