300PRC muzzle brake test
Вставка
- Опубліковано 28 сер 2024
- I've modified my Beast brake design slightly over the years since introduction and I haven't done a 300PRC test so I did a new test yesterday. I picked up some new brakes (Precision Armament , Assassin, Kirby Allen (Pain Killer), Ti Pro 3, and APW) along with the ones I've already tested such as the T-3 and T-4 Terminator, Fat Bastard, Muscle brake, and Area 419. I didn't want to clutter the test up with all of my brakes so I kept it simple with all the brakes close in relative port size.
A couple notes: The APW brake and the Ti Pro 3 both had relatively high run out, around .006" which can lead to bullet impacts if the bore isn't large enough and/or the barrel threads aren't perfectly straight. The Ti Pro 3 was made entirely in a mill which is nearly impossible to get run out numbers as low as a good lathe. There are ways to get the run out lower in a mill but the manufacturer hasn't figured that out. Most good brakes have run out .002" or less and the best are .001 or less. Self timed brakes just about always have higher run out due to stacking tolerances from multiple threaded parts. 1 piece brakes can have run out numbers in the .0002"-.0003" range. My Vermont no go 3b 5/8x24 thread gauge goes in the Pain Killer brake so the threads are super sloppy.
I just just received by Beast Brake for my 300 Win Mag today ! It’s a work of art! No joke. Can’t wait to shoot it.
I’ll be ordering a brake for my 300 PRC very soon. Thanks Nathan !
Your welcome.
Like your vid’s, straight to the point. Keep up the good work 👍🏼
Great video as I need a brake for my new 300 prc.
Watch his video of the 6.5 CM. This 300 PRC doesn’t even have a rifle stock and it is recoiling less with the Beast brake than a 6.5 CM with no muzzle brake. That is a massive reduction in recoil if the test is accurate.
I just received my Beast Brake for my 300 Win Mag. From Nathan. Quality is excellent. I’ll be ordering same for my 300 PRC soon.
@@joebidendidthat5121does the recoil feel the same as a 6.5cm with no brake ?
Win mag now feels like a .223 or 5.56, maybe less. Don’t even think about recoil at all while shooting it. Have not ordered one for the .300 PRC yet
@@joebidendidthat5121 that’s sweet, I’m only asking because i’m building a 8.5lb total weight ( including scope )300 win mag for out west backcountry hunting.
Looks great. Thank you
Your welcome.
I sent an email. But I’m curious what’s the best brake (from your two part brake series) for a savage precision elite 30 in barrel 300 win mag. I’m stuck between Beast II and Super Beast II. It looks like your beast is always the best performer tbh
5 port beast cf or ti beast cf
Hello, congratulations for these videos, I wanted to ask if the APW raptor brake used is the monster 5-port version or the normal 5-port version. Greetings from Spain, I subscribe to the channel. thank you.
It's the standard Raptor. They didn't make the monster version when I bought it.
@@muzzlebrakesandmore3492 Thank you very much, greetings friend.
Apologies for the silly question, but what would you suggest for 5.56/.223 ? Kind regards.
A 2 port or 3 port. The specific brake would depend on the barrel diameter, thread size and 1 piece or 2 piece self timed.
Are you not taking any orders for muzzle brakes at the moment?
What you recommend for a 300 win mag Remington 700? Little TI beast?
Is it the sporter barrel? If so I usually do a 5 port Super Baby Beast with 9/16x24 threads.
Are you still making videos ?
Would be interested to see the mdt comp brake in action if you have any in your collection
The first port on the MDT Comp is 90% rather than angled back towards the shooter. That greatly reduces the effectiveness of a muzzle brake. It helps with the concussion but gives up a bunch of performance. It's the same principle as the Muscle brake. The first port does a higher percentage of work than the rest and handicapping it by making it 90 degrees drastically reduces the overall effectiveness.
I have one of your brakes on my 300 prc 110 elite!
I hope you like it.
@@muzzlebrakesandmore3492 Love it
Have you done any with your Super Beast II brake?
I haven't tested them recently but they have the same ports as the 1 piece Super Beast which are slightly larger than the Big Beast II. I haven't done a overall test because most of my competitors brakes that I use are roughly the size of my Beast/Beast II brakes. They perform much better then they did in my 300wm test since I redesigned them though.
What do you recommend for a 300 PRC CA MPR with carbon fiber barrel? 5 port Ti Beast?
I would do a Ti Beast CF since it has the same ports as the Ti Beast but it is closer to your barrel diameter at the muzzle.
Is the Ti Pro 3 from SRS?
Yes.
Yes it is.
Easy to cheat - all you had to do was put additional weight in the bucket for your brake.
There is no weight in the bucket at all. The bucket just adds a bit of weight to calm the sled upon initial firing to get more consistent results. I guess I could make a expanded metal bucket instead for skeptics like you. That way you could see through it. Unlike some I dont need to cheat. My brakes perform as advertised. Most others don't even show velocity or how they actually come up with their crazy high percentage of recoil reduction claims. I built the test sled, I'm pretty sure if I wanted to cheat I could and you'd never know it was happening. The same could be said for about any video testing anything on UA-cam or anywhere else on the internet.
The cool thing is I have a even better brake design that is almost finished and will be released soon. The sled travel is a couple inches less already if I don't change anything from now until it is released. When you actually test design changes and tweaks you find out what works. That is how I know I make the most effective brakes on the market. If it came down to having to prove it in front of a audience I'd have no problem doing it. I doubt you'd find others willing to say the same.
@@muzzlebrakesandmore3492putting that money where your mouth is. Love it.
@@muzzlebrakesandmore3492when are you releasing that new one? I’ll be in need of one soon
@@lessforloans It depends on when I can get out for more testing. The weather has been cooperative. I want to test a few more tweaks before I release so there is nothing left on the table this time.
So is this new design ready yet
are you still active? i would love to purchase a brake or two but your website looks like it hasn’t been updated since april of 2019. i shot you an email at your aol address :)
It was last updated April of this year. I am still active as this video was done in July of this year.
Please do a video about 12 gauge muzzle breaks.
I have thought about doing shotgun and pistol brakes but haven't had a chance yet.