I ha e gotten more out of your videos in a day than I have in the 2 plus years I have been leathercrafting. Thanks so much for a proper explanation of things
Great video Justin. Thanks for showing. It's very subjective but I don't like how sparse the .45 is on the 5mm. I absolutely love the .55 on the 3.38. I like the tighter yet still defined look of this combo. I've only got 3.85 and 3mm frenchies and this video has made it quite clear what thread I should and shouldn't be using. Cheers bud
Yes I'm new so this was definitely for me. It was great, highly informative without being a shill for some company. It really answered a lot of my question about starting out. I hope you will make more vids in this informative format.
Hi, I use only Braided Polyester Thread. I found good aesthetic look are For 3.85 mm-0.8mm 12ply, 3.38mm-0.5mm 8ply (for wallets and Card Holders)and 2.7mm-0.35mm 6ply threads (for watch straps)(All French Style ). For Bags I use 6mm Round hole irons with 0.8mm 12ply Braided Polyester Thread. Hope anyone would feel helpful. Thanks🙏🏾
Hello!! Thank you VERY much for the video, I always felt lost while looking at Irons, and you made it very easy for me! One question: what type of needles can I use for a 0.55mm thread? Even those sizes seem to be all over the place. And thanks again for all the info
I’m glad it helped. You are looking for needles with a diameter of 0.8-0.9mm. Depending on what brand you go with each will have a different size range. The length of the needle will be between 48-54mm.
They are very similar. The Japanese tooth profile is more rounded and smoother out vs the diamond irons. It’s almost a hybrid between the diamond and French profile.
Nice representation of the differences between stitch spacing and thread sizes. There's a lot more to the end result that maybe you could cover on a future video or videos. The type of thread also matters. Round, linen thread versus flat, braided polyester, for example. When I use them, they yield different results even when using the same irons. Since you asked for feedback, I prefer the appearance of the 3.38mm irons and the 0.45mm or 0.55mm thread. To me, there's way too much hole left visible in the 5mm and 0.45mm/0.55mm combination. Holes are necessary, but I feel better when they are less prominent. I also would have liked to have seen the backside of the samples. Both sides matter. And of course, stitching technique matters. So in the end, good stitching is a synergy of an array of products and techniques. Not easy to explain in a short time. That's why Nigel Armitage released the 4 part series on saddle stitching, definitely worth watching to be able to really understand what goes into saddle stitching and why. I enjoy your content, keep it up!
Thanks for the feedback. I tried to keep this one simple because I think a lot of people drastically over complicate the matter. That’s why I left out the actual technique, that’s for another video. I personally think the vast majority of people don’t need to consider all the variables that are covered in Neil’s video. I think it’s videos like that that make new leatherworks think it’s more complicated than it is. When I started out Neil was a valuable resource. Know that I do this full time I realize how simple it can be, there’s no need to overcomplicate the matter and a 4 hour series on it is very much over complicating the matter even if it’s perfectly accurate…which of course it is.
@@NorfolkHandmade I agree that sometimes too much information can be overwhelming. Nigel's video series is more for those wanting to take that deeper dive. You can have success by keeping things simple, no doubt. However, it helps to understand, really understand the process in order to make corrections. Sometimes folks stuggle and have no clue as to why. Nigel's videos explain the why. That's all. Maybe you can do a short video covering the basics of saddle stitching as you do it. You do it quite well.
Exactly right. His videos are incredible for the depth they go into. Extremely helpful for people that can absorb a lot of content or for anyone that wants to refine their technique. I plan on doing more single topic videos with a focus on the new leatherworker. I appreciate your comments. 👍🏻
Beginner here, when you say you're using pricking irons does that mean they only mark the leather and then you need to poke through with an awl? Or are you hammering them all the way through?
This is one of those cases where old terminology has carried over to modern technology. Almost all the irons you find together are intended to pierce the leather through, we still use the term “pricking iron” even though they do more than prick the leather. A more appropriate term is “Stitching Chisel” but most suppliers use that even in reference to diamond irons only. It’s safe to say the vast majority of leatherworkers today are punching straight through and if they aren’t they will say so.
Hi, I truly enjoyed how well you explained the spacing and the stitching. So I wend on different website and the numbers don’t see to be the same as you explain. Where do you purchase your threads? It will be most helpful…thanks!
@@NorfolkHandmade - I just took a peek at the website. I didn’t know they where linen threads. Most of the videos I have seen tend to recommend the polyester blend thread stating it’s stronger. Im trying to be brave and make my son a wallet.
Linen Thread is a natural thread, poly is synthetic. If linen thread is properly waxed it will be just fine for many many years. Keep in mind it was around long before poly threads, and, if people like Peter Nitz use it, I imagine it is good for most. That said, I do encourage everyone to try a variety, what works for me might not work for you.
📌 *TIMESTAMPS* _for my own reference (I know they're in the description, but these are customised for my brain 😁)_ 1:45 - Side-by-side visual of 3.38 and 5mm spacing samples 3:22 - Consideration 1: Thread Gap 3:30 - Consideration 2: Backstitch appearance 3:40 - Breakdown: 3.38mm iron 4:54 - Breakdown: 5mm iron 7:03 - Recap + Thoughts / Close-up side-by-side
Super helpful. I'm new to leather. What about needles? Trying to understand the relationship between holes, needles, & thread. With 4mm pricking + .6mm thread, what type harness needle please?
I think this also depends on the thread. I have .6mm and .8mm Ritza Tiger thread, which is flat instead of round. I find that because the thread is flat .6mm is still too big for a 3.38 mm iron.
How can you compare diamond vs french/Japanese, one is a punch the other a pricking iron. Pricking then using an awl isn't something I think new leather workers are after because it's easily 3x slower.
These days pricking iron is used interchangeably with stitching iron even though the irons today are used to punch straight through the leather. Personally I’ve been trying to only say stitching iron but old habits die hard.
I’ve used Sinabroks, Crimson and Pro Atelier Plus, all very good. WUTA has some great products are very reasonable prices. They might require a bit of work to get the edges sharp, like and French skiver and edge beveler, but once they are tuned up they perform well.
I measure 5x the length that I will be stitching. I suggest experimenting with 4x and 6x as well. You’ll find it changes depending on the thickness of leather your stitching and the spi of you stitching irons.
Search on UA-cam for a video called "Saddle Stitching - How to Calculate your thread length" by Armitage Leather. There is a formula, web site and app that he has that will calculate the correct amount. A 3/4/5x can work sometimes but depending on the thickness of the leather can cause you to waste a lot of thread or still come up short.
A word of caution if you decide to follow Neil’s approach to measuring thread, in my opinion it dramatically over complicates the subject. The only time I’ve ever come up short on thread is when I try to “not waste thread” or ironically when I used his method. For the majority of leatherworkers 5x is going to be perfect amount for the small leather goods with a thickness of 3-6mm.
@@NorfolkHandmade i think simpler is better, but I will check the video, but for me 5 times the length seems easier to do and I do not care a little waist. I am just ln the learning curve, first protect
This hobby is however you want it to do. There are a lot of ways to get into this hobby on the cheap. This is a very valid question and one that should be considered when you are first starting out.
Let me know in the comments what you think. Do you like the 0.45/5mm? Hate it?
Cheers
Justin
I love the idea of creating a reference sample.
It’s come in handy a few times.
I ha e gotten more out of your videos in a day than I have in the 2 plus years I have been leathercrafting. Thanks so much for a proper explanation of things
That comment makes my day. It’s exactly why I do this.
Great video Justin. Thanks for showing. It's very subjective but I don't like how sparse the .45 is on the 5mm. I absolutely love the .55 on the 3.38. I like the tighter yet still defined look of this combo. I've only got 3.85 and 3mm frenchies and this video has made it quite clear what thread I should and shouldn't be using. Cheers bud
So subjective! I’m still undecided on the 0.45/5mm. But it’s certainly fun to experiment. I’m glad the video helped.
Yes I'm new so this was definitely for me. It was great, highly informative without being a shill for some company. It really answered a lot of my question about starting out. I hope you will make more vids in this informative format.
That’s great, I’m glad it was helpful.
Thank you! I saved a screen shot for reference!🙋🏼♀️
It's hard to find videos with this quality, going over spacing and threas! Super appreciated!
Thanks! I’m happy you found it helpful. I found this topic to be very confusing when I first started. I made the video that would have helped me. 👍🏻
Excellent video. In my opinion, I prefer 0.55/5mm. It fills the iron hole more. thanks for sharing.
Agreed, a solid choice.
Great video. Great explanation and closed up, clear examples, where we can see clearly, what you are explaining.
Thanks!
Hi, I use only Braided Polyester Thread. I found good aesthetic look are For 3.85 mm-0.8mm 12ply, 3.38mm-0.5mm 8ply (for wallets and Card Holders)and 2.7mm-0.35mm 6ply threads (for watch straps)(All French Style ). For Bags I use 6mm Round hole irons with 0.8mm 12ply Braided Polyester Thread. Hope anyone would feel helpful. Thanks🙏🏾
Thanks for sharing!
I really appreciate the help picking my first pricking irons!
Great information
Simple and to the point, thank you very much for sharing this video
Thanks for watching!
Thanks for the video. I wish you had used the same color on each of the thread sizes to make the comparison easier.
Thanks, if you download the free guide on my site you can print it out in black and white. That would get you closer. 👍🏻
Excellent for us beginners! Thank you
That’s great, thanks for watching.
Hello!!
Thank you VERY much for the video, I always felt lost while looking at Irons, and you made it very easy for me!
One question: what type of needles can I use for a 0.55mm thread? Even those sizes seem to be all over the place.
And thanks again for all the info
I’m glad it helped. You are looking for needles with a diameter of 0.8-0.9mm. Depending on what brand you go with each will have a different size range. The length of the needle will be between 48-54mm.
Pretty much agree with your choices. Not sure what the difference is between Japan irons versus those Tandy diamonds.
They are very similar. The Japanese tooth profile is more rounded and smoother out vs the diamond irons. It’s almost a hybrid between the diamond and French profile.
Finally, a clear explanation. Thank you.
You’re welcome, glad it helped.
Great video! Thank you for sharing your experience!
Thanks for watching!
Nice representation of the differences between stitch spacing and thread sizes. There's a lot more to the end result that maybe you could cover on a future video or videos. The type of thread also matters. Round, linen thread versus flat, braided polyester, for example. When I use them, they yield different results even when using the same irons.
Since you asked for feedback, I prefer the appearance of the 3.38mm irons and the 0.45mm or 0.55mm thread. To me, there's way too much hole left visible in the 5mm and 0.45mm/0.55mm combination. Holes are necessary, but I feel better when they are less prominent.
I also would have liked to have seen the backside of the samples. Both sides matter. And of course, stitching technique matters.
So in the end, good stitching is a synergy of an array of products and techniques. Not easy to explain in a short time. That's why Nigel Armitage released the 4 part series on saddle stitching, definitely worth watching to be able to really understand what goes into saddle stitching and why.
I enjoy your content, keep it up!
Thanks for the feedback. I tried to keep this one simple because I think a lot of people drastically over complicate the matter. That’s why I left out the actual technique, that’s for another video. I personally think the vast majority of people don’t need to consider all the variables that are covered in Neil’s video. I think it’s videos like that that make new leatherworks think it’s more complicated than it is. When I started out Neil was a valuable resource. Know that I do this full time I realize how simple it can be, there’s no need to overcomplicate the matter and a 4 hour series on it is very much over complicating the matter even if it’s perfectly accurate…which of course it is.
@@NorfolkHandmade I agree that sometimes too much information can be overwhelming. Nigel's video series is more for those wanting to take that deeper dive. You can have success by keeping things simple, no doubt. However, it helps to understand, really understand the process in order to make corrections. Sometimes folks stuggle and have no clue as to why. Nigel's videos explain the why. That's all. Maybe you can do a short video covering the basics of saddle stitching as you do it. You do it quite well.
Exactly right. His videos are incredible for the depth they go into. Extremely helpful for people that can absorb a lot of content or for anyone that wants to refine their technique. I plan on doing more single topic videos with a focus on the new leatherworker.
I appreciate your comments. 👍🏻
Beginner here, when you say you're using pricking irons does that mean they only mark the leather and then you need to poke through with an awl? Or are you hammering them all the way through?
This is one of those cases where old terminology has carried over to modern technology. Almost all the irons you find together are intended to pierce the leather through, we still use the term “pricking iron” even though they do more than prick the leather. A more appropriate term is “Stitching Chisel” but most suppliers use that even in reference to diamond irons only. It’s safe to say the vast majority of leatherworkers today are punching straight through and if they aren’t they will say so.
Thanks for this.
You saved a lot of time for me.
I’m glad it helped.
Hi, I truly enjoyed how well you explained the spacing and the stitching. So I wend on different website and the numbers don’t see to be the same as you explain. Where do you purchase your threads? It will be most helpful…thanks!
Some companies use different numbering systems for their thread and irons. I purchased Meisi from Pro Atelier Plus.
@@NorfolkHandmade - I just took a peek at the website. I didn’t know they where linen threads. Most of the videos I have seen tend to recommend the polyester blend thread stating it’s stronger. Im trying to be brave and make my son a wallet.
Linen Thread is a natural thread, poly is synthetic. If linen thread is properly waxed it will be just fine for many many years. Keep in mind it was around long before poly threads, and, if people like Peter Nitz use it, I imagine it is good for most. That said, I do encourage everyone to try a variety, what works for me might not work for you.
📌 *TIMESTAMPS*
_for my own reference (I know they're in the description, but these are customised for my brain 😁)_
1:45 - Side-by-side visual of 3.38 and 5mm spacing samples
3:22 - Consideration 1: Thread Gap
3:30 - Consideration 2: Backstitch appearance
3:40 - Breakdown: 3.38mm iron
4:54 - Breakdown: 5mm iron
7:03 - Recap + Thoughts / Close-up side-by-side
Amazing!
Super helpful. I'm new to leather. What about needles? Trying to understand the relationship between holes, needles, & thread. With 4mm pricking + .6mm thread, what type harness needle please?
John James #2 or #4 will probably work fine.
Loved this video! Question.. where do you buy your thread?
Thanks! I get Meisi from Pro Atelier Plus (although there are a few suppliers), and I get ritza from Tandy.
What brand of thread was used? I am having trouble finding the .55mm in the most recommended brands.
I use Meisi Super Fine Linen thread in 0.45 and 0.55mm. Check out Artisan Leather Supply and Pro Atelier Plus.
I think this also depends on the thread. I have .6mm and .8mm Ritza Tiger thread, which is flat instead of round. I find that because the thread is flat .6mm is still too big for a 3.38 mm iron.
For sure, the ritza thread flattens out quite a bit after hammering.
Thank you very much for the excellent explanation. Thank you for using the international measurement system (millimeter).
Thanks for watching. It seems to be the most consistent measurement system and the one most people understand.
This was an excellent video, thank you
Thanks!
very informative, thanks!!
The “Disclaimer” 💯💯💯 FACTS
Had to put that just for the know it all’s.
How can you compare diamond vs french/Japanese, one is a punch the other a pricking iron.
Pricking then using an awl isn't something I think new leather workers are after because it's easily 3x slower.
These days pricking iron is used interchangeably with stitching iron even though the irons today are used to punch straight through the leather. Personally I’ve been trying to only say stitching iron but old habits die hard.
@@NorfolkHandmade Thank you for clearing that up, good ones are not cheap id hate to spend the money erroneously.
Any opinion on WUTA brand ones ?
I’ve used Sinabroks, Crimson and Pro Atelier Plus, all very good.
WUTA has some great products are very reasonable prices. They might require a bit of work to get the edges sharp, like and French skiver and edge beveler, but once they are tuned up they perform well.
Very nice content !!
Btw the "S" letter on the spacing word are upside down lol 🤣
🤣 I somehow didn’t noticed that until after stamping. Figured I’d leave as a little Easter egg for the observant ones.
Thanks, for the informative video.
Your welcome!
Thanks !
Спасибо за гайд, очень полезный. Привет с России
Thanks for watching. Спасибо за просмотр
0.45mm looks great to me.
Agreed, that’s my go to.
How do you know the length of tread you will need?
I measure 5x the length that I will be stitching. I suggest experimenting with 4x and 6x as well. You’ll find it changes depending on the thickness of leather your stitching and the spi of you stitching irons.
@@NorfolkHandmade thank you so much, this info is priceless!
Search on UA-cam for a video called "Saddle Stitching - How to Calculate your thread length" by Armitage Leather. There is a formula, web site and app that he has that will calculate the correct amount. A 3/4/5x can work sometimes but depending on the thickness of the leather can cause you to waste a lot of thread or still come up short.
A word of caution if you decide to follow Neil’s approach to measuring thread, in my opinion it dramatically over complicates the subject.
The only time I’ve ever come up short on thread is when I try to “not waste thread” or ironically when I used his method.
For the majority of leatherworkers 5x is going to be perfect amount for the small leather goods with a thickness of 3-6mm.
@@NorfolkHandmade i think simpler is better, but I will check the video, but for me 5 times the length seems easier to do and I do not care a little waist. I am just ln the learning curve, first protect
where’s the chart?
There’s a link in the description, scroll to the bottom you’ll see the thumbnail for the video and the download button below that.
But wait, isn’t diamond and Japanese the same thing?
Not exactly. Diamond irons have a diamond shape…obviously. Japanese style have a more rounded diamond shape, kind of a mix between French and diamond.
Question. What would your preference be if you only had one set of irons, the Japanese or European style?
French style irons are my preference. But only because I prefer a finer stitch. But for certain projects the Japanese irons are a better choice.
Good grief. This hobby aint for nickle dimes.
This hobby is however you want it to do. There are a lot of ways to get into this hobby on the cheap. This is a very valid question and one that should be considered when you are first starting out.