The worse part is all the new people in the comments saying how cool and they are going to try it. Great way to destroy a hobby. By showing new people how to do something that will 100% fail, piss them off, cost them money, and make them never try again...... This video is a AD for a laser cutting machine and they used FPV to try and get attention. Just wrong.
This has been done before. We don't build quads like this, because it's terrible in regards to performance, durability, and resonance. Also, it's more expensive and heavier. I love unique and interesting builds too, and this video was well done, but it was essentially an ad for fpv brand manufacturers, not a guide for newcomers to the hobby on how excel in FPV.
@@willpowerfpv3246 I agree. All this is going to do is make a new person mad and never come back.
2 роки тому
@@willpowerfpv3246 do you feel like all fpv content has to just be for the noobs? i mean really there's more to life then selling personality starter kits.
Using an ABS body with metal arms is a very bad idea!! Especially when the stack screws go thru the arms. When it crashes, the arms are not going to break, the body is, destroying all the electronics inside. A novelty idea, just not practical.
Just why?! Except showcasing JLCPCB additive manufacturing, there is very little reason to repeat this. - Metal (I suppose with 100% infill) is heavy as heck. - 3D printing a metal sheet would be much faster using a plasma cutter or such, and you don't make use of the advantages. - ABS is not stiff and heavy, and basically worse even than PLA which we don't use because it's not strong enough (at least you didn't use it for the arms). - Lastly I wonder about the air flow for the VTX. There may be a way for metal additive manufacturing to create a cool drone. It'd be more expensive than carbon fibre, and probably have worse specs in pretty much all regards except coolness. However I'd at least print most of the frame with small slots for the motors, perfect fits for the electronics, and such. Just to give it something special. May be end up looking like a DJI Avata but in metal.
Very nice build, however I would go with somewhat less height of the body... that ESC/FC stack si massive and takes too much space for my taste, makes it look too bulky. That said, again - a very nice build and nice flight too! You get a like & subscribe :D
Thanks for the nice comment. In terms of efficiency, it was a bit heavy compared to the carbon frame. It was an experimental project. It generally works.
I dont want to be that guy, but I´m pretty sure that the flight footage was taken with another drone.. the first thing is that in the external shoot of the flying quad there is no Gopro on it, could be that the shoot was taken with the gopro and put on afterwards.... but the main thing is that there is no way that the arms screws havent worked their way loose or just straight up stripped the ABS in the first minute of flight.... I mean these screws cant even be tightend since there is no nut on it, just straight into the 3d print.......
3d print body lol.. for cinematic it will fly. But freestyle? Never working with high PID's and less filter settings. The other bigger problem is bad durability
Trash drone way too heavy costs to o much and the frame body is way too brittle and the harmonics are Huge most likely. One crash and it will become a yard sale
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Ortur LM3 Laser Engraving & Cutting Machine : s.zbanx.com/r/72CKmMzqTk6S
Discount: $60 OFF for Ortur Laser Master 3 (Dsicount code: J60)
1:20
Amazing quadcopter build! Also, some very cinematic FPV drone shots... wow! 👏🏻👏🏻
Thanks for your nice comment and support bro.
Amazing!🔥
Always amusing when people with no real grounding in engineering try and "design" something....This is a prime example...😳😳🙄😏😏🇬🇧
The worse part is all the new people in the comments saying how cool and they are going to try it. Great way to destroy a hobby. By showing new people how to do something that will 100% fail, piss them off, cost them money, and make them never try again...... This video is a AD for a laser cutting machine and they used FPV to try and get attention. Just wrong.
What no smoke stopper, pilots are screaming 😱
Her zamanki gibi yine mükemmelsiniz yaptığınız ürünü en iyi şekilde sunmayı başardınız ürün ve çekimleriniz çok iyi 👍
Awesome video. I have shocked when I whatched it. I have not used before that kind of material. I want to test it. 👏🏻👏🏻👏🏻
I follow your work with interest. Workmanship, shooting quality and transitions are all very successful. Congratulations. 🎉
Thanks for nice comment and supports 🙏
Omg i wish this video is a bit longer
Love seeing unique builds. All these negative comments come from those who can't do for themselves and can only follow.
Or from people with more education then the rest.......
@@ChainsawFPV who gives a fuck if it's optimal this is a hobby and people like to try new things to find out for themselves. go build something.
This has been done before. We don't build quads like this, because it's terrible in regards to performance, durability, and resonance. Also, it's more expensive and heavier.
I love unique and interesting builds too, and this video was well done, but it was essentially an ad for fpv brand manufacturers, not a guide for newcomers to the hobby on how excel in FPV.
@@willpowerfpv3246 I agree. All this is going to do is make a new person mad and never come back.
@@willpowerfpv3246 do you feel like all fpv content has to just be for the noobs? i mean really there's more to life then selling personality starter kits.
*Çok iyi proje, Çok başarılı drone.
Tam bir usta işi
*Very good project, Very successful drone.
A master's work
👋👋👋👋👋
Güzel yorumunuz için çok teşekkürler.
This is magic 🤩
Amazing print drone. Made a Ford Raptor F150 or Ram 1500 in metal AND plástico with remote rc
Yokluğun gözü kör olsun 👏👏🔥❤️
Hi Bro , Your videos and your talent amazing. Try fighter jet also🤩😇waiting for your next video😇
Eline sağlık kardeşim yine çok güzel bir video olmuş
taş gibi cihaz oldu elinize sağlık
How long would the battery last in terms of flight duration
Very nice fpv drone setup 👏
Uuuff yine döktürmüşünüz
Maaşallah abi hakkını veriyorsun takipteyiz
Using an ABS body with metal arms is a very bad idea!! Especially when the stack screws go thru the arms. When it crashes, the arms are not going to break, the body is, destroying all the electronics inside. A novelty idea, just not practical.
Yea i was surprised too with the material combination...
There's a reason why nobody uses stainless steel or plastic for the frame lol
@@shaneintegra agree, carbon still the best
So it should be better using metal to build both body and arms?
@@iCatch nah bro to heavy imo
Lamborghini urus like Dogde challenger last time you made
Top drone I love it
Nice video, what is the total weight with battery???
Çok zarif ve kaliteli 👏👏
Efsane olmus elinoze saglik
Çok iyi çok profosyonel bir çalışma.yeni projelerinizde firmamız ile birlikte sizinle çalışmak isteriz👏👏👍
Başarılar …
Hocam elinize sağlık çok iyi olmuş. Malum kur yüksek en ucuz yolla her şeyiyle RTF bir FPV toplama videosu yapabilir misiniz yeni başlamak isteyenlere
Çok yakında fiyat performans başlangıç drone videosu hazırlayacağım.
Kesinlikle bu kumandadan istiyorum harikasının craft chanel
Yine süper bir çalışma, harika bir tasarım olmuş👍👍
is the cinematic drone shots used by gopro or the fpv drones cam?
Abi çok güzel olmuş eline sağlık ben de istiyorum aynısından
Çok havalı be kardeşim 👏👏👏
Mükemmel bir çalışma daha tebrikler 🔥🎉
Just why?! Except showcasing JLCPCB additive manufacturing, there is very little reason to repeat this.
- Metal (I suppose with 100% infill) is heavy as heck.
- 3D printing a metal sheet would be much faster using a plasma cutter or such, and you don't make use of the advantages.
- ABS is not stiff and heavy, and basically worse even than PLA which we don't use because it's not strong enough (at least you didn't use it for the arms).
- Lastly I wonder about the air flow for the VTX.
There may be a way for metal additive manufacturing to create a cool drone. It'd be more expensive than carbon fibre, and probably have worse specs in pretty much all regards except coolness. However I'd at least print most of the frame with small slots for the motors, perfect fits for the electronics, and such. Just to give it something special. May be end up looking like a DJI Avata but in metal.
Is it heavy how much it weighs with out the battery
bu almanyadaki gas turbine helikopterler dev boyutta nasıl yaparım ? yardım edin lütfen teşekkürler
Harika bir tasarım olmus
Güzel yorumunuz için teşekkürler.
Nice dron
Thanks for your nice comment and support.
Nice bro how much do u spend for this?
Dayı herşey ingilizce ama açıklama, video adları Türkçe?
Ayrıca açıklamada usa yazıyor? :D
Can we import these drones part to india.
Do we need any permission before to import the parts to india?
Very nice build, however I would go with somewhat less height of the body... that ESC/FC stack si massive and takes too much space for my taste, makes it look too bulky. That said, again - a very nice build and nice flight too! You get a like & subscribe :D
Thanks for the nice comment. In terms of efficiency, it was a bit heavy compared to the carbon frame. It was an experimental project. It generally works.
Muhteşem....
Süper👏👏👏
I want to buy this drone where i can get?
nice build how much does it cost
bonjour vous le vendez cdt
My guy using star bit for hex drive bolts 😆
mükemmel
I dont want to be that guy, but I´m pretty sure that the flight footage was taken with another drone.. the first thing is that in the external shoot of the flying quad there is no Gopro on it, could be that the shoot was taken with the gopro and put on afterwards.... but the main thing is that there is no way that the arms screws havent worked their way loose or just straight up stripped the ABS in the first minute of flight.... I mean these screws cant even be tightend since there is no nut on it, just straight into the 3d print.......
Muito bom
Te dasafio imprimir uma CPU de Computador
wow
Price?
I've included sales website links for all the equipment and parts I use in the description.
erhan abim benim
Please build a fpv 5 " freestyle drone Best premium in 2023
I want one😅
3d print body lol.. for cinematic it will fly. But freestyle? Never working with high PID's and less filter settings. The other bigger problem is bad durability
👏🏻👏🏻👏🏻👏🏻👍🏻🙋🏻♂️
Make a rc Bugatti chiron
🥰🥰🥰🥰
👍😉
Holy cow that stack looks sexy
Trash drone way too heavy costs to o much and the frame body is way too brittle and the harmonics are Huge most likely. One crash and it will become a yard sale
Stainless steel lol, 6Al-4V Ti would be much better
Please
To heavy.