Depends on your budget. Larger tires will always do better than narrow. And AG tires will be better than turf tires of the same size. But it's always fun to see the face of the guy who spent 3× the money as you out pull him. If your new to my channel look for my tip videos.
@@brieannateylar5810 I cut the turf tires which help a lot. They don't bite any better but they are self cleaning. Sometimes they work better other times they don't. I don't always get to pull against ag tires of the same size, so I'm still working out on what surface they work best. If I had the money I'd get ag tires but these work for now.
Awesome. We have our first pull this coming weekend. Was wondering if you have any information on wheelie bar like how far should they go back past the tires and how far off the ground. And any tips on air pressure in rear tires? We be pulling transfer sled thanks for the bolens video s love them we are putting together a 853 now but this weekend we using a Kubota 2 cylinder diesel
The club your pulling with should have rules on wheelie bars and hitch. My club rule for wheelie bars say 5 inches back from tire and 5 inches off the ground. Tire pressure is subject to change based upon track condition and tire size. Six lbs is a good starting point. Remember that the hitch on the bolens is very close to the rear axle, which made it react completely different than any other tractor I have ever pulled. this will make for an interesting build.
@@geared4torque989 she did well for her first pull made it 101 feet. We learned a lot about hitch height and weight in. We going to do few more things to the Kubota and she found 2 more pulls closer to us. After that we going to get back on the Bolens 853 build. Thanks for your help. Have learned alot from you.
At this level of pulling most garden tractors can compete and win. It's more about making an unexpected tractor pull good for dirt cheap. If I went pulling in a modified class, I would get a cub
My panzer was bought for 250. I replaced the stock engine with a 420 predator because the output shaft matches the stock pulley, and the stock engine was tired. That was less than 300 at the time I bought it. I got 4 tires and rims for 400. So for 750 and some scrap steel for weights. The engine and tires can go to another tractor if I ever break this one.
@@geared4torque989 around here u can find a cub with a 12hp kohler for around 250 and up do a clutch spring upgrade and put cut tractor tread tires and be very competitive in the stock classes
Nice pulls
very cool!
What gear do you guys run in?? I would imagine that it prolly be in the middle. Or a lower gear?
In your opinion what tires are better? the turf style or ags. Basically doing the same kind of pulling except its usually a dead weight pull.
Depends on your budget. Larger tires will always do better than narrow. And AG tires will be better than turf tires of the same size. But it's always fun to see the face of the guy who spent 3× the money as you out pull him. If your new to my channel look for my tip videos.
@@geared4torque989 Thanks Ill check it out
Looked like a good day of pulling
Yes it was.
@@geared4torque989 do the turf tires pull any better on the dirt track then the garden tractor tires ?
@@brieannateylar5810 I cut the turf tires which help a lot. They don't bite any better but they are self cleaning. Sometimes they work better other times they don't. I don't always get to pull against ag tires of the same size, so I'm still working out on what surface they work best. If I had the money I'd get ag tires but these work for now.
@@geared4torque989 thanks for the information .
Nice
Awesome. We have our first pull this coming weekend. Was wondering if you have any information on wheelie bar like how far should they go back past the tires and how far off the ground. And any tips on air pressure in rear tires? We be pulling transfer sled thanks for the bolens video s love them we are putting together a 853 now but this weekend we using a Kubota 2 cylinder diesel
The club your pulling with should have rules on wheelie bars and hitch. My club rule for wheelie bars say 5 inches back from tire and 5 inches off the ground. Tire pressure is subject to change based upon track condition and tire size. Six lbs is a good starting point. Remember that the hitch on the bolens is very close to the rear axle, which made it react completely different than any other tractor I have ever pulled. this will make for an interesting build.
@@geared4torque989 thank you so much we got the hitch and wheelie bars done today we been at it hard core this week to get ready for Saturday
@@jasonscruggs986 How did you do at your pull?
@@geared4torque989 she did well for her first pull made it 101 feet. We learned a lot about hitch height and weight in. We going to do few more things to the Kubota and she found 2 more pulls closer to us. After that we going to get back on the Bolens 853 build. Thanks for your help. Have learned alot from you.
Geared 4 torque. What state you live in. I'm from Virginia
Where did you get those rims and tires
I found them on craigslist a few years ago. 4 wheels and tires for $400
Ok thank you
Y doesn't anyone use cub cadets that's all we pull
At this level of pulling most garden tractors can compete and win. It's more about making an unexpected tractor pull good for dirt cheap. If I went pulling in a modified class, I would get a cub
@@geared4torque989 u say dirt cheap what kind of money do u have in ur tractor
My panzer was bought for 250. I replaced the stock engine with a 420 predator because the output shaft matches the stock pulley, and the stock engine was tired. That was less than 300 at the time I bought it. I got 4 tires and rims for 400. So for 750 and some scrap steel for weights. The engine and tires can go to another tractor if I ever break this one.
@@geared4torque989 around here u can find a cub with a 12hp kohler for around 250 and up do a clutch spring upgrade and put cut tractor tread tires and be very competitive in the stock classes