Ok that's an half made valve, you just forgot to put the exit hole for the air to be released when the hammer is hit and to seal it with rubbers to make it somewhat airtight. But props to you for making it even simpler than most "face off" valves and for listing the materials with precision. I think threading the end of the rod and put a nut welded with a washer and a rubber washer for airtightness would be easier and more reliable than that earphone jack thingy. Edit: Ok there is a "part 2" for what is missing.
Sir sana ma pansin mo saan po naka bili NG ganyan boss para gagawa sana din ako ganyan Di kc kaya bumili NG airgun subra mahal kaya gagawa na lng sana ako aww
Boss tanong lng boss,, anong diameter size ng barrel gamit nyo?? At anong klaseng flatt washer din gamit nyo boss,, rubber washer ba yan o steel washer???? Watching from,, DAVAO City,,
good evening sir.search mo nlng to sa google map mo or kung alam mo ung malapit sa binondo ask mo dun kung saan ung CORONA tindhan ng mga bakal..or kung may alam kapo sa ibang lugar store ng CORONA Santa Cruz, Manila, 1008 Metro Manila
good afternoon sir jan karlo serate pag tapos kona gawin lahat ng parts saka ko iaasemmble then ksama nadin dun ung pagpwesto nung butas na lalabasan ng hangin medyo mahirap kasi kung lalagyan mo agad tapos di sila magtugma nung sa barrel..tnx
@@angkolmer00 hndi kopa po masasabi sir kc wala papo ung inorder kong barrel ..balak ko.pag dumating na ung barrel saka ko po sya butasan..upload ko agad pag po naikabit kona..thnks bro!
oo sir sa hardware lang ako nabili ng mga ginagamit ko..meron din available sa mga following store: UNITOP, MINIBOX, MOTORWORLD, UNISUN.. PHILTREND PRO
Ok that's an half made valve, you just forgot to put the exit hole for the air to be released when the hammer is hit and to seal it with rubbers to make it somewhat airtight. But props to you for making it even simpler than most "face off" valves and for listing the materials with precision.
I think threading the end of the rod and put a nut welded with a washer and a rubber washer for airtightness would be easier and more reliable than that earphone jack thingy.
Edit: Ok there is a "part 2" for what is missing.
👍👍
แบบนี้สวยอะไหล่หายากจังน้าบาวจะพยายามพัฒนาฝีมือทำอยู่ตอนนี้ สวยๆ ชอบๆ💙👍
ayus din nmn yn boss
Mantap kawan.
How to install the trigger puller? and how to make the trigger
So when you push the spring where does the air go? There needs to be a relief bored on the nipple to direct the air pressure
👏👏👏👏👏
Nagbebenta poba kayo ng ganiyan?
If kung yes. Want ko sanang bumili....
Vous ne mettez pas un joint en caoutchouc pour l’étanchéité ?
👍👍👍👍👍👏👏
Sale muy bien muy bien hecho me gusta eso tipo de invento del creación del hombre me gusta eso me gusta me gusta crear cosas
Brilliant build list
Air gun banane ka or valve air tank bananeka tarika pura full video or pura saman ka nam banake video daleya
😅😅😅❤❤❤👍👍👌👌
I had to stop watching as soon as I saw him holding a workpiece with plyers while drilling
How much power can it take
Ser how much pagawa kahit valve lng? Paano ka po ma kokontak?
nice video. 😎😊
can i buy this air gun valve system?
Kuat di berapa psi itu..
Sir sana ma pansin mo saan po naka bili NG ganyan boss para gagawa sana din ako ganyan Di kc kaya bumili NG airgun subra mahal kaya gagawa na lng sana ako aww
nice one bro new friend more videos from sanpablo laguna ako thanks sa pag share
tnx for watching i will upload the trigger mechanism i make ..
Sir pwd bng umorder ng ganyn sau ehehe hirap pag walang gamit eh ahaha salamat nice and very awesome vid
pwede naman po boss..anung parts po ba need nyo?
Valve system misko lods hm yan ganyn sau?
Anu po fb mo sir pm tau
@@PHILTRENDPRO ako din magkano pagawa?
@@bossjb730 pa pm po ako sa fb page ko sir ..
Tuluykeun mang.
Nepika anggeus.
😂
San nabili Yan lods
Boss ituka bopa psi than.amakumu tamakkutmak pemecahmah.jikalauma 3000 psi tamakthanman.tipistismis imatumu valve
Bicara apa kang? 🤣
it is the signal part of a QEV
Pwede po pakita san mo banda binutasan?
Ika 869 kaibigan. Bisitahin mo din ang base ko if dika busy! 😁
sir nasa mag kano lahat nagastos mo sa material lang sa pagawa ng valve?
nasa 250 po
Panu m seal ang hangin kng walng oring o rubber washers
Pwede ba magorder nito boss at saan?
Saan po makakabili nyan boss sa hard were ba
Boss tanong lng boss,, anong diameter size ng barrel gamit nyo?? At anong klaseng flatt washer din gamit nyo boss,, rubber washer ba yan o steel washer???? Watching from,, DAVAO City,,
sorry late reply boss..steel washer gawa ako video sa paglalagay ng may seal at oring
Nabibili pa sa hardware yang mga ginamit jan boss
oo sir sa hardware lang ako nabili ng mga ginagamit ko..meron din available sa mga following store:
UNITOP, MINIBOX, MOTORWORLD, UNISUN..
Sige idol salamat si kuya kasi gumagawa din pero palpak haha salamat ser godbless ser sana dumami subcriber mo
bahan2y beli dtmpt ap mas
Nag bebenta ka ba sir
Boss tanong ko saan nakakabili hex nipple
sir pwd po ba aku umorder sa inyo nyan?f ok po.pm mu po aku sir.
Sir saan po b Ang location nio ngawa din po b kayo ng airgun??
Tanung Lang po saan pwede umorder Ng barrel Ng air gun
good evening sir.search mo nlng to sa google map mo or kung alam mo ung malapit sa binondo ask mo dun kung saan ung CORONA tindhan ng mga bakal..or kung may alam kapo sa ibang lugar store ng CORONA
Santa Cruz, Manila, 1008 Metro Manila
uhmm so san lalabas yung hangin?
good afternoon sir jan karlo serate pag tapos kona gawin lahat ng parts saka ko iaasemmble then ksama nadin dun ung pagpwesto nung butas na lalabasan ng hangin medyo mahirap kasi kung lalagyan mo agad tapos di sila magtugma nung sa barrel..tnx
@@PHILTRENDPRO Pwede pakita san banda mo binutasan? Idea lang po!
@@angkolmer00 hndi kopa po masasabi sir kc wala papo ung inorder kong barrel ..balak ko.pag dumating na ung barrel saka ko po sya butasan..upload ko agad pag po naikabit kona..thnks bro!
Walang airleak ?...
What used soldering Iron on the motorcycle Rios?
That will easily loosen the welded part.
That DIY is waste of time, useless and unreliable.
good job.. adakah anda menjual nya ?
Die x faham boss
Orang pilipin itu
no creo k funcione no tiene sello
Bahanya beli dimana
LAY LAING TOOLS BAI/?
My brother can you please give me this for me through the qoriyer please reply me
Bisa pesen 1 saya? Yang murah harganya
Sir panu po ninyu na combined you earphones sa nut sir pm nalang po sa account ko
Dapat tamang sukat lang yung pag butas mo sa plug
C vs
C eaangelninschwede
โกศล
Nabibili pa sa hardware yang mga ginamit jan boss
oo sir sa hardware lang ako nabili ng mga ginagamit ko..meron din available sa mga following store:
UNITOP, MINIBOX, MOTORWORLD, UNISUN..
PHILTREND PRO