DJI Mini 3 Pro | Improved Transmission? | 1.7.8 Fly App Update!

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 27

  • @SimonsDrones
    @SimonsDrones  2 роки тому +2

    Have your flights been stable on DJI Fly App 1.7.8? Thanks for watching and please remember to like + sub!

    • @Motorhomelife_Adventures
      @Motorhomelife_Adventures 2 роки тому

      Hey Simon, mine up to now has all been good, range has also been good. I've been out to well over 1000 meters. Thanks for the video!

    • @SimonsDrones
      @SimonsDrones  2 роки тому +1

      That's awesome, thanks for the update!

    • @SimonsDrones
      @SimonsDrones  2 роки тому

      Sir, are you able to enter pairing mode? Once drone and controller are turned on, enter pairing mode on both and see if that fixes your problem.

    • @SimonsDrones
      @SimonsDrones  2 роки тому

      Or if the lights are blinking red to yellow then it means you need compass calibration

    • @capohd28
      @capohd28 2 роки тому

      I have a mini 3 pro and love it. The range however is far less than my Phantom 4 Pro. I do have a more solid transmission with the mini 3 Pro, but it drops off very quickly. The Phantom just keeps going. Has issues earlier, but just keeps going for longer distance. I live in a wooded area, and I can’t get further than 1km away with the Mini 3 Pro. The Phantom experiences dropouts sooner, but will keep going out to about 4 kms or so before it returns to home. I think the external antennae are the reason the Phantom has more ultimate range. I do wish the RC had external antennae option as it does have more solid connections before it drops out.

  • @RobertLewis85
    @RobertLewis85 Рік тому

    Awesome look at the newest app update, thanks for the review as always Simon!!!!

  • @StephenEhrlichPhotos
    @StephenEhrlichPhotos 2 роки тому +3

    I performed this update. I noticed I had to run the update 3 times - once each for the 3 batteries I own. Part of the update also updates the battery firmware.
    Also, many of my camera settings were reset. Such as I had set video to D-Cine and this was reset to normal. Also I had set stills to capture JPEG+Raw. This was reset to just JPEG.
    My tip is after the update, check all your settings.

  • @fj1100mark
    @fj1100mark 2 роки тому +1

    I think you’ll find that it only goes up to your return to home height. If it’s lower than it if it’s already higher than it, I think it stays there it doesn’t come down to it

  • @alainfloutier6466
    @alainfloutier6466 2 роки тому +1

    Hello Simon, thank again for your video. I have a question for you: I updated both my Mini 3 PRO and DJI RC with the newest firmware (1.7.8 and 1.004) and did some range test. I have a battery PLUS. On the way OUT, I reached a very comfortable distance of 5 000 m, with a yellow two bars signal since I passed the 1500 m distance. Response and video feed were good. Battery was at 62% with 19 mn left to fly. Then I started to loose to much signal and I decided to do an RTH. Everything went OK, but on the wayback, I completely lost signal several times during the same back travel (however the RTH continued to work normally), when this did not happen on the way out. Does this mean the reception antennas in the drone work differently according to the drone orientation with the RC? Other strange behavior: during the RTH, the remaining flight time went up to 45 mn when it was indicating 19 mn at the max distance point.!! And I had about 50% battery left when I landed, despite a front wind on the way back while it was back wind on the way out. Does it mean the RTH function optimizes the motors and optimize the battery power, maybe by disabling some internal features, in order to maximize the chances to come home safely? Thank you for your or anybody else feedback

  • @paulkuiper7077
    @paulkuiper7077 2 роки тому +3

    The set RTH-hight is always a minimum. If you press the RTH-button, your drone will ascend to the set RTH-hight when your current altitude is lower, but it will not descend to the set RTH-hight when flying lower..

    • @stupest
      @stupest 2 роки тому

      Yeap minimum RTH

    • @shaf3006
      @shaf3006 2 роки тому

      Set it higher than anything around you

  • @eadjh98
    @eadjh98 2 роки тому

    Nice one Simon! Like your demo! 👍

  • @anthonydixon6552
    @anthonydixon6552 2 роки тому

    Hi if you press return to home and your above your return hight it will not drop the hight it stay's at that hight . it only gose to your return to home hight if your below your return to home hight. also if you press return to home and your less than 50 meters away it will return to home but at what ever hight your at , at that moment in time.

  • @jeangoupil8129
    @jeangoupil8129 2 роки тому

    I think that what they said with the update is "enhanced transmission" unable, mean that it now can use the 4g module like it was enabled already on the Mavic 3.

    • @poupiw
      @poupiw 2 роки тому

      That is true. But I can't find anyone testing that outside of China or Russia since it's only available in China. But I would think that maybe the dji 4g dongle is juste a 4g USB key.

  • @cliveharrison7934
    @cliveharrison7934 2 роки тому

    Hi I see you’ve got a interesting gimbal cover and also a nice video 👍

  • @jakeraptor1346
    @jakeraptor1346 2 роки тому

    Set your gimbal settings

  • @-Gooner76-
    @-Gooner76- 2 роки тому

    Also master shots in vertical now

  • @STEVIEDVD
    @STEVIEDVD 2 роки тому

    Nice run through👍

  • @kamikazekaos
    @kamikazekaos 2 роки тому

    You need to fly higher to get better signals

  • @meathead2676
    @meathead2676 2 роки тому

    If the air 2s comes with a longer flight time battery like the mini 3..I would be considering buying it.. otherwise I will be buy the mini 3

    • @thomashardy9994
      @thomashardy9994 2 роки тому

      A scaled down version of the Mavic 3 will be out soon. Many think it will be around $1300! Supposedly the only thing missing will be the telephoto lens. If true, that will be a great value.