always do the big 3 upgrade (look it up). upgrading your alt if over 1500 watts rms don't even bother looking at agm or lead acid just use lithium and if you use yinlong or headway cells they are by far a great start and safe to use. Yinlong 45ah banks are so powerful that is all you need for a battery in total starts your v8 up like nothing but i do advise to learn about them and I personally don't go smaller than 45ah yinlong and should be used in a daily driven vehicle.
@@AaronBilger thank you bro I was wanting to run about 2500 -3k rms on a ranger and I know how bad the 1500 rms system was without anything I blew that sub and wanted to go bigger and do it right this time instead of giving it dirty power you the goat!
@@AaronBilger I have big three already waiting to be installed on my current 440 rms system that’s getting me by since I blew my setup and is going into my girls car will I need to big three her newer ford focus?
You sure about that? Because I have two jp23 v2 also and they were barely pushing my two sundown xv3 12s then I ordered a jp63 and all hell broke loose feel like I'm riding around with the Devil 😂😂😂
I have 3 jp23s and a jp83 I love them I ran 2 jp23s strapped for a year on super low ohm and they did great I do have upgraded electrical you can't run amps low ohm without upgrade
I put the jp23 on th db3515. You were right about it being to small but still very impressive. Ill be ordering the jp63 in the future after i do some electrical upgrades.
Thank you, JP for making this video! I currently am running that DB 4515r on my JP43 and it is amazing. I recently bought a JP63 and in the middle of doing the swap, (perfect timming for the video). I was wondering if it was going to he too much for the sub, but you answered that question. I can't wait to hear it on the JP63! After the installation, I will give my feedback on the JP63. I have no doubts it will be a great one
For those out there who are running subs just a bit smaller than these behemoths... this is what I'm doing and I'm very happy with it. 2 Deaf Bonce 275's on a JP43. Autotech 370 amp alt, 2 D4S LTO 6.0 and I'm still breaking the subs in but I'm more worried that my Silverado is going to fall apart before the subs break in!
I was in the market for upgrading my subs 8 months ago was going to go with sundown zv6 12’s but went with fi audio mt 12’s because it was cheaper than the zv6 but now I’ve noticed the zv6 are now 743.99. Oh well I’m very happy with my setup doing 10k rms
Just bought a Avatar STU 1246 from Down4Sound. Now im Amp shopping, what would you recommend??? I was thinking about going with the JP23.v2(2800w). The RMS on the Avatar is 3000watts obviously & im sure it will take more with that 4" VC. Also im picking up a 2.70cft enclosure next week, is that going to be to much for a sub that calls for 1.94cft?? Any suggestions would be greatly appreciated & thanks for your time
JP, just purchased your last Crossfire C7 18" sub. Curious if and when you will have more in stock, and what amp would you recommend. Thank you for making bassheads keep bassin on.
Whats up Jp ? Whens the d4s subs gonna drop .....got an empty dual 12 box waiting to go in my project truck ....like have subs match my amps ....was going go with 2 sundown sa classics .....but put that on hold ....hoping the d4s subs will drop in next couple weeks
Ive got 2 deaf bonce 3015s, what JP amp should i use, i have 2 mechman 370s, planning on using the jp40 possibly 2 and jp630 along with 4/0 sky high from under the hood to the trunk, then dual 1/0 runs from battery to amps, this is along with 2 JP234s for the mids and highs
IMO, if using the Jp95 Sub Ch., it would match well with= 2- Crossfire C3s, 1- Crossfire C5, 1- Sundown U V1, 1- Sundown SA Classic, or 2- Sundown E, hope this helps?
I will be running a jp8 with 1 12" sub sundown/down4sound prefab box and a jp95 running all my interior speakers all down4sound 4 sfx 6.5" and one sfx 8"
Have you ever heard of American Bass? If not, you should look into their products. Especially the subwoofers because they fall in line with the subwoofers that you sell. It’s just a recommendation. Also…..will you have the D4Sound profab box built for the Solo X’s?
Hello jp I have 2 xv2 12s 4 ohms, 400 amps alternator, 80AH AGM battery in the back, 0 ofc wire, I got excited and order a jp83, planning to get a jp40 and delete the battery, if I get 2 more xv2 4 ohms I have to wire at 0.5 ohms it going to be too much power? or can you give me a better idea in the upgrades Gracias Señor JP
If you do all of that electrical, & do big 3, plus frame grounds in back, with 3 runs of 0 gauge powers, & grounds? Then running your Jp83, @ 1/2 ohm, on 4- XV2 12s, will be a great match!
I’m considering spending my hard earned money on a jp amp but I keep hearing about the faulty Bluetooth bass knob. I’m sure you’re aware of the issues with them, why hasn’t it been corrected? Is there another more dependable bass knob compatible for the jp33 and up?
That would be a great match, if your 1- 18" XV3 is a Dual 1, wired to 2 ohms strapped!? If your wired to 1 ohm strapped, you would have to be conservative with your settings/power output.
Jp ive got 4 of DS18 12" 4000 WATTS HIGH EXCURSION SUBWOOFER DUAL VOICE COIL 4-OHM EXL-XX12.4DHE In my escalade looking st running a dual alternator package have an agm 3400 underthr hood and 64ah headway bank in the back. Im looking for an amp that wont give me issues. Im running 000 gauge wire what do you reccomend?
I would go with a way bigger amp for those subs. Running a single Sundown Audio 12" SA v.2 with a JP23v2 and I'm sure the sub could still take more. Above the sub i am using is the u-series , x-series, z-series and last NS-series.
I have a sundown audio U-Series 12 V2 on a crescendo 1,500 watt amp and i feel like it's wayyy underpowered so my question is what prefab box can i throw it in and what amplifier would pair good with it
If your 1500 watt amp, is 1 ohm stable, & your wired to 1 ohm @ rest, its prob. only giving 2 ohm, to 4 ohm power, while music is playing? So between 400 to 800 watts, after impedance rise. If using a 1 ohm stable amp, & wired to 1 ohm, i suggest getting an amplifier, that can do 1500 watts @ 4 ohms, ( that is stable @ 1 ohm ), & wire to 1 ohm. This will let you account for impedance rise, & provide clean, headroom. IMO, i suggest a JP33, or Jp43, set conservatively. Enclosure= (1.75 cu. Ft., to 2.25 cu. Ft. Net, for 1-12"), tuned @ 34Hz to 38Hz, with 25 to 35 square inches of port area, if using pre-mentioned amplifiers!?
JP plz plz help me i have 3 zvx 15s dual 2 i want to run jp 63 but the ohm load with 3 dual 2 ,or do i go with taramps smart 8 plz plz tell me what to get for my 3 skar zvx 15s plz help
Jp63, if you run 2- D2 ZVX 15s, @ 1/2 ohm? But if your set on running a 1.33 ohm load with the 3- ZVXs, then get the Taramps Big Boss 8k Bass amplifier.
Hi i purchased the resilient team 18 and it blew within not even 30 minutes of playing time it started smoking and then it shut off I'm truly saddened by this and talk to car audio fanatics and they said that resilient probably won't help me get a new one and have payment plans for the whole year for a sub that doesn't even work
@Bmx4620- What was/is your electrical system? Enclosure specs, net cu. Ft., port area, tune? What amplifier, & wired to impedance? Always give a company a chance. Im sure they will ask you these same questions, and ask for the original purchasers receipt, from an authorized RS dealer.
Jp for the winnnn so I’m in Lubbock Texas we ain’t seeing d4s on shirts decals boxes nothing me and the other 2 big bass heads in Lubbock mouth water on the jp83 your choice of color and signatures ( 1 day ) In short you need to get Lubbock in the no Big d wiz Steve mead Car audio fabrications guy Of course du magic mike lol
Question: i bought a Sundown ZV6 12 inch its still in route to me and i had bought the JP23 V2 few weeks back since its rated 2800 watts Rms at 1 Ohm and the woofer is 2500 watts Rms would that still work or i need to increase amplifier?
@joshholden8561 thanks for that info i will try to get a bigger amp in the future im sure i will have to add additional stuff to it due to power once i get bigger amp im gonna be running on factory setup for now
@joshholden8561 i have the 0 gauge RCA wires ran at the moment would those be fine too? Im running 2 kicker l7 for now on the JP23 until the ZV6 arrives. I had another question i had the 2 kicker L7s installed in my 1st car i was getting good lows out of them but since i changed cars i dont get any Lows out of the same setup do you know what could be the issue?
Neo subwoofers are great for daily driving I don't recommend spl because they heat up faster than ferrite subwoofers I have one fi neo 4.11 18 and the sound quality is phenomenal but my fi hc 15s can take a beating all day long
@@jpmarx660 usually the package deals with subs already in boxes are lower model subs. They get the job done but you'll probably want to upgrade soon after so your literally gonna pay twice for something you could have originally started with. The loaded enclosure package could be perfect for you,it's all personal preference though.
@@1HotLegendLS - Nobody seems to mention, wired to ohm load, when suggesting an amplifier. Wiring to 1/2 ohm, on a 1 ohm stable, half bridge amp, will give 2x the actual power, after impedance rise, vs the same amp., wired @ 1 ohm. Also, don't get discouraged. As long as your enclosure is built right, it will sound amazing. I would recommend the New Jp93, wired @ 1/2 ohm if you have the electrical.
I definitely need way more watts and your amplifiers looks amazing JP. I'll think about buying one of your fabulous amplifiers. If you want JP give me a JP 63 amplifier so I can be a sponsor and I'll sell my Soundqubed S1-2250.1 amplifiers.
I watched a jp 63 roast 2 nightshade subs was way way too much power wired to .5 these ppl putring 4 k and more on a xv3 i dont get it i had 2 xv3 12s that couldnt handle a taramp smart 5k in exact spec box tuned to 32 htz the smart 5k was clamping 8500 watts at times and the subs would bottom out and they was bought new installed in a double baffle 1 inch thick 6 cube box . And more lithium than was needed and. Great voltage id take a avatar stu over a xv3 any day
![Down4Sound JP23 Amplifier Review and Amp Dyno Test [4K]](http://i.ytimg.com/vi/ufuoi-vn-g4/mqdefault.jpg)
![Down4Sound JP23 Amplifier Review and Amp Dyno Test [4K]](/img/tr.png)
Got a JP33 on a XV3 15! It’s about to go into a 4th order and I can’t wait!! Love the product man !
Can you do a video explaining when wattage wise you need to upgrade electrical and what to upgrade at each stage?
always do the big 3 upgrade (look it up). upgrading your alt if over 1500 watts rms don't even bother looking at agm or lead acid just use lithium and if you use yinlong or headway cells they are by far a great start and safe to use. Yinlong 45ah banks are so powerful that is all you need for a battery in total starts your v8 up like nothing but i do advise to learn about them and I personally don't go smaller than 45ah yinlong and should be used in a daily driven vehicle.
@@AaronBilger thank you bro I was wanting to run about 2500 -3k rms on a ranger and I know how bad the 1500 rms system was without anything I blew that sub and wanted to go bigger and do it right this time instead of giving it dirty power you the goat!
@@AaronBilger I have big three already waiting to be installed on my current 440 rms system that’s getting me by since I blew my setup and is going into my girls car will I need to big three her newer ford focus?
. Thanks for advice & tips, sir¡
Hey jp i got the jp 23v2 and just wanted to say i love it. It is with out a doubt the baddest amp i have ever owned thanks and keep up the good work
You sure about that? Because I have two jp23 v2 also and they were barely pushing my two sundown xv3 12s then I ordered a jp63 and all hell broke loose feel like I'm riding around with the Devil 😂😂😂
Hell ya its a bid upgrade from the old rp2000
I have 3 jp23s and a jp83 I love them I ran 2 jp23s strapped for a year on super low ohm and they did great I do have upgraded electrical you can't run amps low ohm without upgrade
I put the jp23 on th db3515. You were right about it being to small but still very impressive. Ill be ordering the jp63 in the future after i do some electrical upgrades.
I have 2 xv2 15s on a 63 from JP and they handle very well, lots of 💪 flex I love your products especially the amps JP👍
Thank you, JP for making this video! I currently am running that DB 4515r on my JP43 and it is amazing. I recently bought a JP63 and in the middle of doing the swap, (perfect timming for the video). I was wondering if it was going to he too much for the sub, but you answered that question. I can't wait to hear it on the JP63! After the installation, I will give my feedback on the JP63. I have no doubts it will be a great one
Sir,amazing powerful amp you got ,thanks for having us to see this unlimited power thanks to you sir.
Man I can't wait big son I will carry all your awesome equipment watch jp slappinsounds will be on the mapss 🎉can't freaking wait
JP keep it coming my guy , thanks a million 💪🏾💪🏾
For those out there who are running subs just a bit smaller than these behemoths... this is what I'm doing and I'm very happy with it.
2 Deaf Bonce 275's on a JP43. Autotech 370 amp alt, 2 D4S LTO 6.0 and I'm still breaking the subs in but I'm more worried that my Silverado is going to fall apart before the subs break in!
I was in the market for upgrading my subs 8 months ago was going to go with sundown zv6 12’s but went with fi audio mt 12’s because it was cheaper than the zv6 but now I’ve noticed the zv6 are now 743.99. Oh well I’m very happy with my setup doing 10k rms
JP23 1.5 on a U12 v1 in a TLine enclosure... Love it.
Power wire gauge: Do you use the gauge size for the wattage for the amp at 4 ohm, or at the ohm load the system is running?
Just bought a Avatar STU 1246 from Down4Sound. Now im Amp shopping, what would you recommend??? I was thinking about going with the JP23.v2(2800w). The RMS on the Avatar is 3000watts obviously & im sure it will take more with that 4" VC. Also im picking up a 2.70cft enclosure next week, is that going to be to much for a sub that calls for 1.94cft?? Any suggestions would be greatly appreciated & thanks for your time
Dude is the Vic Edelbrock of audio!
JP, just purchased your last Crossfire C7 18" sub. Curious if and when you will have more in stock, and what amp would you recommend. Thank you for making bassheads keep bassin on.
When I build another stereo system, it's going to be Crossfire Amps and Subs
I ran the jp.43 but I blew it to smithrians think jp.33 would be perfect
Love to see JP out of the comfort zone and match jp amps to their sq (ish) offerings. Love to see a 6x75 or 6x100. Bring back AB class😂👍
Whats up Jp ? Whens the d4s subs gonna drop .....got an empty dual 12 box waiting to go in my project truck ....like have subs match my amps ....was going go with 2 sundown sa classics .....but put that on hold ....hoping the d4s subs will drop in next couple weeks
I've always been intested I'n a home audio theater set up matching.
Ive got 2 deaf bonce 3015s, what JP amp should i use, i have 2 mechman 370s, planning on using the jp40 possibly 2 and jp630 along with 4/0 sky high from under the hood to the trunk, then dual 1/0 runs from battery to amps, this is along with 2 JP234s for the mids and highs
I like 1 amp systems, what sub would you recommend for the jp 95? Also what sub for the jp77?
IMO, if using the Jp95 Sub Ch., it would match well with= 2- Crossfire C3s, 1- Crossfire C5, 1- Sundown U V1, 1- Sundown SA Classic, or 2- Sundown E, hope this helps?
I will be running a jp8 with 1 12" sub sundown/down4sound prefab box and a jp95 running all my interior speakers all down4sound 4 sfx 6.5" and one sfx 8"
Have you ever heard of American Bass? If not, you should look into their products. Especially the subwoofers because they fall in line with the subwoofers that you sell. It’s just a recommendation. Also…..will you have the D4Sound profab box built for the Solo X’s?
Those American Bass Kings are monsters
Hello jp I have 2 xv2 12s 4 ohms, 400 amps alternator, 80AH AGM battery in the back, 0 ofc wire, I got excited and order a jp83, planning to get a jp40 and delete the battery, if I get 2 more xv2 4 ohms I have to wire at 0.5 ohms it going to be too much power? or can you give me a better idea in the upgrades Gracias Señor JP
If you do all of that electrical, & do big 3, plus frame grounds in back, with 3 runs of 0 gauge powers, & grounds? Then running your Jp83, @ 1/2 ohm, on 4- XV2 12s, will be a great match!
I’m considering spending my hard earned money on a jp amp but I keep hearing about the faulty Bluetooth bass knob. I’m sure you’re aware of the issues with them, why hasn’t it been corrected? Is there another more dependable bass knob compatible for the jp33 and up?
Mans rubbing his hands like Birdman in the thumbnail 😂😂😂
He bout to go rape lil Wayne
I have 2 12" hooligans and a JP 63 will that be enough or do I need a 83
1:25 - what about strapping 2 of the 23v2s together for 1 Xv3 18?
That would be a great match, if your 1- 18" XV3 is a Dual 1, wired to 2 ohms strapped!? If your wired to 1 ohm strapped, you would have to be conservative with your settings/power output.
Hey jp when will the d4s pro fab hd3 single 12 box be back in stock.
I have a JP3 would you recommend an 8” or 10” D4S subwoofer?
Jp ive got 4 of DS18 12" 4000 WATTS HIGH EXCURSION SUBWOOFER DUAL VOICE COIL 4-OHM EXL-XX12.4DHE
In my escalade looking st running a dual alternator package have an agm 3400 underthr hood and 64ah headway bank in the back. Im looking for an amp that wont give me issues. Im running 000 gauge wire what do you reccomend?
I would go with a way bigger amp for those subs. Running a single Sundown Audio 12" SA v.2 with a JP23v2 and I'm sure the sub could still take more. Above the sub i am using is the u-series , x-series, z-series and last NS-series.
If we have the salt 4 it's best to get the zv6.
Jp if I have a lead acid battery up front will there be a problem with me running an xs power d3400 in my trunk as my secondary battery?
How about the avatar stu 1546? Which amp? Im running a jp23 1.5 and it seems to have plenty of power.
I have a sundown audio U-Series 12 V2 on a crescendo 1,500 watt amp and i feel like it's wayyy underpowered so my question is what prefab box can i throw it in and what amplifier would pair good with it
If your 1500 watt amp, is 1 ohm stable, & your wired to 1 ohm @ rest, its prob. only giving 2 ohm, to 4 ohm power, while music is playing? So between 400 to 800 watts, after impedance rise. If using a 1 ohm stable amp, & wired to 1 ohm, i suggest getting an amplifier, that can do 1500 watts @ 4 ohms, ( that is stable @ 1 ohm ), & wire to 1 ohm. This will let you account for impedance rise, & provide clean, headroom. IMO, i suggest a JP33, or Jp43, set conservatively. Enclosure= (1.75 cu. Ft., to 2.25 cu. Ft. Net, for 1-12"), tuned @ 34Hz to 38Hz, with 25 to 35 square inches of port area, if using pre-mentioned amplifiers!?
Wish Sundown Uv2 was discussed
What is the required cu ft for the DB 45R 15?
I have the deaf bonce 4518 on the new deaf bonce adam pro 12.5k amp . I had a 9k deaf bonce amp on it but it was not enough so i went to the 12.5k
Those subs are so big they make him look small even though he's swelled up 😂😂
JP plz plz help me i have 3 zvx 15s dual 2 i want to run jp 63 but the ohm load with 3 dual 2 ,or do i go with taramps smart 8 plz plz tell me what to get for my 3 skar zvx 15s plz help
Jp63, if you run 2- D2 ZVX 15s, @ 1/2 ohm? But if your set on running a 1.33 ohm load with the 3- ZVXs, then get the Taramps Big Boss 8k Bass amplifier.
what would pair up with a single 12" nightshade
5k-6k
Does Down4sound makes 5 channel amp,
I think they only make 6 and 7 but to be honest the sub channels can be bridged so you're still good.
Yes
Thanks.@@1904audio
Make a 5 and 7ch.
The JP 95 is a five channel amp
Hi i purchased the resilient team 18 and it blew within not even 30 minutes of playing time it started smoking and then it shut off I'm truly saddened by this and talk to car audio fanatics and they said that resilient probably won't help me get a new one and have payment plans for the whole year for a sub that doesn't even work
@Bmx4620- What was/is your electrical system? Enclosure specs, net cu. Ft., port area, tune? What amplifier, & wired to impedance? Always give a company a chance. Im sure they will ask you these same questions, and ask for the original purchasers receipt, from an authorized RS dealer.
I have 2 sundown x v3 12 2000 watts 1 ohm what amp you recommend to get I was told salt 4 but I want a jp amp instead
Jp63 if wired @ 1 ohm, per pair.
When is the D4S subs coming out
Fallish
anything amp/sub combos that i wouldn't need an upgraded electrical
Jp for the winnnn so I’m in Lubbock Texas we ain’t seeing d4s on shirts decals boxes nothing me and the other 2 big bass heads in Lubbock mouth water on the jp83 your choice of color and signatures ( 1 day )
In short you need to get Lubbock in the no
Big d wiz
Steve mead
Car audio fabrications guy
Of course du magic mike lol
Question: i bought a Sundown ZV6 12 inch its still in route to me and i had bought the JP23 V2 few weeks back since its rated 2800 watts Rms at 1 Ohm and the woofer is 2500 watts Rms would that still work or i need to increase amplifier?
The jp 23 will work but that sub can handle 3500 RMS easy on clean unclipped power
@joshholden8561 thanks for that info i will try to get a bigger amp in the future im sure i will have to add additional stuff to it due to power once i get bigger amp im gonna be running on factory setup for now
It will work but the zv6 can easily do close to double rms if the power is clean and not clipped
@@Fahad-ik1zo the jp 23 will need Xtra battery and big 3 done and might as well get ur 1/0 ofc kit niw
@joshholden8561 i have the 0 gauge RCA wires ran at the moment would those be fine too? Im running 2 kicker l7 for now on the JP23 until the ZV6 arrives. I had another question i had the 2 kicker L7s installed in my 1st car i was getting good lows out of them but since i changed cars i dont get any Lows out of the same setup do you know what could be the issue?
Are neo subs in a daily as sketch as some say?
Neo subwoofers are great for daily driving I don't recommend spl because they heat up faster than ferrite subwoofers I have one fi neo 4.11 18 and the sound quality is phenomenal but my fi hc 15s can take a beating all day long
Whoop whoop. Thanks for the explanation. It's a mixed bag on how people respond. I appreciate the information.
I looked this morning and tons of packages were sold out..
So pick out some subs and a amp and you just made your own custom package. I mean it's not hard to figure out just saying...
@bobbyackerson4125 I thought it was a better price when was a package ...deal. lol. I have to save up more $$$ regardless
@@jpmarx660 usually the package deals with subs already in boxes are lower model subs. They get the job done but you'll probably want to upgrade soon after so your literally gonna pay twice for something you could have originally started with. The loaded enclosure package could be perfect for you,it's all personal preference though.
What amp for two SDDN 15s
1 jp 83 per sub for sure. This video is geared towards specs and not real world applications my teamates are putting 1 jp 83 per sub on those ddns
One salt 12
@@1904audio was hoping for a single JP amp
@@xiongxiongloft5937 little expensive, but on my list. Was looking for a JP alternative
@@1HotLegendLS - Nobody seems to mention, wired to ohm load, when suggesting an amplifier. Wiring to 1/2 ohm, on a 1 ohm stable, half bridge amp, will give 2x the actual power, after impedance rise, vs the same amp., wired @ 1 ohm. Also, don't get discouraged. As long as your enclosure is built right, it will sound amazing. I would recommend the New Jp93, wired @ 1/2 ohm if you have the electrical.
👍👍
I definitely need way more watts and your amplifiers looks amazing JP. I'll think about buying one of your fabulous amplifiers. If you want JP give me a JP 63 amplifier so I can be a sponsor and I'll sell my Soundqubed S1-2250.1 amplifiers.
I watched a jp 63 roast 2 nightshade subs was way way too much power wired to .5 these ppl putring 4 k and more on a xv3 i dont get it i had 2 xv3 12s that couldnt handle a taramp smart 5k in exact spec box tuned to 32 htz the smart 5k was clamping 8500 watts at times and the subs would bottom out and they was bought new installed in a double baffle 1 inch thick 6 cube box . And more lithium than was needed and. Great voltage id take a avatar stu over a xv3 any day