a very nice introduction on plc, it was my first to learn this even ive seen this on my job as a mechanical technician hence electrical whose tinkering those. If some busted we yell on them, now i understand, i must do this on my own project, super thanks for the inputs.
When connecting to power supply you connected so called GROUND cable instead "earthing cabe" with is HUGE difference. This is big mistake because this green/yellow cable should be used in protective function ONLY. So (-) on power supply is not earth = you cant use green/yellow. Correct me if im wrong. BDW good thing UA-cam has speed option because this lector wasting a lot of time
u are very good in teaching thanks for the training,pls my S7-200)CPU 222 wipe out initial set up program and the language was Italian while am from English speaking country so I will like to have the setting instruction thanks
I bought a house with this system. But i have a probleem, the lights outside wont go on anymore after i switched off and on the main power. Can i just connect q1 and q2 for constant power?
o gosh....a PLC=programable controller and will behave according whatever was programmed in it...it is not a dedicated "house lighting control system"....
I got something so strange I have old logo 230RCo 6ED1 052-2FB00-0BA6 And USB cable I can connect to the CPU and upload and download But I have the new CPL Same v and same number I can't access to on it It ask me the new software version I don't know why
What is this tutorial ??? First ....color coding of wires are wrong. Second ......why your using an expensive ''logo'' just to simulate a simple switching ???
horrible!.....yellow/green cable should only be used for PE (protection earth), not for DC GND....additionally she connects a RED cable to GND too...bad...blue or black are standards for GND....RED should be used for DC power supply....additionally she call a LED (i suppose with integrated resistor) a LIGHT BULB!....gosh!
a very nice introduction on plc, it was my first to learn this even ive seen this on my job as a mechanical technician hence electrical whose tinkering those. If some busted we yell on them, now i understand, i must do this on my own project, super thanks for the inputs.
Beautiful explanation
Thanks 🙏
Very well explained 😊
When connecting to power supply you connected so called GROUND cable instead "earthing cabe" with is HUGE difference. This is big mistake because this green/yellow cable should be used in protective function ONLY. So (-) on power supply is not earth = you cant use green/yellow. Correct me if im wrong. BDW good thing UA-cam has speed option because this lector wasting a lot of time
you are right
green/yellow for ground/earth use
nice voice acting, it was easy even for me to listen her. I like it)
Merci
u are very good in teaching thanks for the training,pls my S7-200)CPU 222 wipe out initial set up program and the language was Italian while am from English speaking country so I will like to have the setting instruction thanks
You used almost every connection for a simple switch and bulb simulation. What if you have a secuence control with some cylinders?
Thanks
hi i need assistance, how can i get LOGO with Installation CD and cable to PC??
WHEN I SWITCH MY LOGO ON I SEE ONLY NO PROGRAM
WWHAT CAN I DO NEXT?
how to connect siemens logo to pc??
nice
Need your communication media bcz i want to learn plc
I bought a house with this system. But i have a probleem, the lights outside wont go on anymore after i switched off and on the main power.
Can i just connect q1 and q2 for constant power?
o gosh....a PLC=programable controller and will behave according whatever was programmed in it...it is not a dedicated "house lighting control system"....
Can someone please explain the shortcuts for the following?
L+
M
?
L+ is Line+ aka 24V ( + ) and M is Minus aka 0V ( - )
I got something so strange
I have old logo 230RCo
6ED1 052-2FB00-0BA6
And USB cable
I can connect to the CPU and upload and download
But I have the new CPL
Same v and same number
I can't access to on it
It ask me the new software version
I don't know why
dear friend~do u want any Siemens electric equipment ? i can give the best price!
y en español quien puede traducir
In French please
very messy & confusing towards the end
udemy should involve native english speaker in their video-tutorials...
German engenering is the Best in the World
Du hast recht.
What is this tutorial ??? First ....color coding of wires are wrong. Second ......why your using an expensive ''logo'' just to simulate a simple switching ???
horrible!.....yellow/green cable should only be used for PE (protection earth), not for DC GND....additionally she connects a RED cable to GND too...bad...blue or black are standards for GND....RED should be used for DC power supply....additionally she call a LED (i suppose with integrated resistor) a LIGHT BULB!....gosh!
Haha over complex solution to do anything
Arduino is much more versatile
in terms of creating unsafe unreliable junk, then definitely yes.
@@Sixta16 provided that you write in a clean way and if you do not need high speed arduino is perfect.