Installing and explaining universal wireless steering wheel control
Вставка
- Опубліковано 10 вер 2024
- My #1 Recommendation To Making Income Online For Beginners 👇
CLICK HERE ➡️➡️➡️ 100kjourneysuc...
Disclaimer: I am not responsible for any damages and you take responsible for doing this at your own risk.
In this video I will be showing you how I installed these universal wireless steering wheel controllers. The first part of the video. I explain about the wires and how to connect them. In the second scene of the video. I demonstrate what I do with the key 1 and key 2 wires and connect them to my stereo key 1 wire. Finally, in the last section of the video. I show you how everything works and you want to test everything before assembling all your car back together.
Explanation how to connect wires
If your custom car stereo has key 1 wire only…then you connect key 1 and key 2 to your only key 1 wire from your custom stereo…
If your custom car stereo has key 1 and key 2 wires…..then you connect key 1 to key 1 stereo and key 2 to key 2 stereo.
After you get to this part it remains only two wires left. The red wire known as ACC wire and the black wire known as GND wire. You will connect those onto the back of your wire harness. Your wire harness should have a red wire and two black wires. You can solder and strip them down and butt plug them as well. But I just prefer to push it in and shake the wire harness to test if it will fall out or not. Any questions feel free to ask me. I love to reply and help others. I will reply back within 24-48 hours.
Wire explanation and how to connect
00:00
Connecting Key 1 & 2 to your custom stereo key wire
03:10
How to program and test
03:37
-----------------------------------------------------------------------------------------------------------
Disclaimer:
There are affiliate links on this video, meaning, at no additional cost to you, I will be compensated if you click through and take action. Being compensated helps me run my UA-cam channel and helps create more content for you.
My #1 Recommendation To Making Income Online For Beginners 👇
CLICK HERE ➡➡➡ 100kjourneysuccesswithshu.com
My deck has a brown wire labeled key1, but also an AV plug. I used the AV plug and nothing happened, is that because I need to figure out programming or because I should be using key1 wiring. Deck doesn't have a key2 but the Scosche harness does. - 05 GM - Scosche SWC interface
Thanks exactly what I was searching for. Wasn't sure what do to since I only had key 1 and no key 2..
Rude Boy No problem dude. Always here to help. Glad to know my video helped.
How do you determine which wire is key 1 or key 2 on the vehicle harness?
You need someone to hold the camera for you since you are explaining how to do something while we are looking at your knee or the floorboard. Its quite simple.
Lol it’s a old video and I only record it myself not using anything to support but it’s a pretty straight forward install.
Hi, I bought an ALLOMN unit to use with a pioneer DHM-C2550NEX. The Pioneer takes the universal 3 pole 3.5mm cable that most steering wheel control adapters use, however the ALLOMN already outputs using key1 key2 and GND, so what should I do? Does anyone know which pole goes to which signal?
megakiller999 It varies on your stereo. How many key wires does it have? if it has two then each one goes separately and if it only has one. Then you put then both on the same key wire on your stereo.
@@shuvang my point is actually that the stereo doesn't have Key1 and key2. It has a 3 pole 3.5mm port (an AUX port essentially) to take SW controls. My old head unit had key1 and key2 and GND and came with a 3.5mm port you could wire it to for OEM adapters, so I know that the 3.5mm port takes key1, key2, and GND, but I don't know which pole goes where.
Yeah if it doesn't have any key wires. I don't think it can work.
Hello, my car has control buttons on steering wheel. I would like to install Sony wx-920 model on May car. Do I have to buy one of these contollers? Is that gadget used only for volume/seek controlling or does it have extra functions? Thank you
Mahmut Kayaaltı The buttons can be used for anything. They just put the icons there for references. As long as your car stereo have the key1 or key2 wire. It should work it’s universal.
So the key 1 wire from remote controller box goes to key 1 wire from multimedia .... its not connected to the car harness connector ???? shiiiiit i maybe fried it
I found the video bro 💪
Paperz Glad you found it.
I have a cheap 2din jvc in my car - the volume is with capacitive buttons and it is not easy to use for many reasons. I want to buy a universal steering wheel control for that reason. It gives 1cable for steering control. I didnt get how you connected yours except the wires in the harness. Is it wireless? Please give me a link with one that will fit for sure. Thank you
G. oxygen Mine is universal. If yours have key1 and/or key 2. It should work. I can’t know for sure unless I see your unit in person.
None of the wires on my stereo have key on it at all. I do have a wire that says wheel remote I’m guessing that would be key one?
chris gress It depends all stereos are different. I got mine from China. So it can vary.
My car doesn't have remote on steering wheel , ,so i ordered an remote control from AliExpress , but as you shown in the video the key1 and key2 is so confusing . Because i am using pioneer avh5090bt model double din set . Can you please say where should i connect key1 and key2 wires . Or the colour of the wire ...please
Dinesh Kumar Does that pioneer have set up for button assignment?
@@shuvang no , but it has a 3.5mm jack provision on the stereo back side for remote control it says
Dinesh Kumar Does that jack already have wires to it? When you connect wireless aftermarket steering wheel control to your car. Your stereo must support it. Usually touch screens stereos that are aftermarket from China.
Also how responsive are the buttons? Before the remote stopped working a few days after installation, the buttons needed multiple presses in order to respond. How is the quality of your remote?
naruhina908 It’s your wiring for sure. Make sure you solder or crimped them properly. Mine is working perfectly since day 1 installed. I’ve drove 120+ and the remote still work fine even driving at that speed..
@@shuvang so that's in reference to the key wires correct? Or both the key wires, acc and ground?
naruhina908 Check both sides. If you crimp and tug it should not come out. If you solder and tug it should definitely not come out.
So I ended up buying the updated version of this steering wheel control, and I was able to get them to work for a few days until it stopped working. I'll look back at see how I installed it and see if anything may have come loose or if the battery just died after a week lol, but I just want to verify that for the ACC and ground, you just inserted the wires to the back of the wiring harness? Nothing else? I'm afraid to splice directly into the wires for more direct contact, so this is the primary way you suggest without cutting the cars' wires?
I was sure I responded to this. Yes, this is the way to do it without splicing. I just push the red and black into the aftermarket stereo and you can crimp or electrical tape the keys 1&2 to the key 1 aftermarket stereo wire.
Hello again. I found your video you directed me to in your initial unit review. Did you decide to buy a universal remote so you didn't have to cut into the original wires or is it just not possible to retain the original controls on the steering wheel?
I think it is possible to do it with the stock one, but you won't have as much buttons. But it's much easier to do it the way I demonstrated it in the video. Took like 5 minutes at most to do it.
so where is the key 1 & key 2 from the car? they are obvious from the stereo because they're labelled.
Varies upon your aftermarket stereo. Some aftermarket stereos also don’t have a wireless function for custom steering wheels using key 1 & key 2.
Where did you put the reciever?Does it have to be near the remote to work?
Michael Aldana They suggest it closest to the steering wheel. I just put mine under the steering and hid it under some of the panels below my steering wheel.
what did you call the black wire !!!!!!!!!!!!!!!!!!!!!!!!!
gnd wire short for ground wire lol...I said negative wire you need to turn on captions or change your thinking.
@@shuvang sounds like you said 'NxxxA' wire @ 0.58
I have android double din installed in honda crv 2011. Will this work for me.?
Rami Shapira It depends what wires your stereo
has in the back.
Hi bro i only have key 2 questions where i connect in the ground or 12v ?
All Tech If you only have a key2 wire. You connect it all together. Your ground and acc you will have to look at your car diagram. It’s different for all cars.
@@shuvang i tried to i find the diagram but i don't find is honda accord 2013 ex
All Tech The diagram of your custom stereo. You are going to have to test the wires for it. You need to find the ground and acc on that wire harness.
@@shuvang ok thanks
Samsung S8 You have to connect them to your key 1 with your key 1&2 or if you have a key 1 and key 2 on your stereo.You connect wires key 1 to 1 and key 2 to 2.
is it the same with the hyundai tucson?
von klien estrada If they have same universal wires yes, as your stereo plug. Look at your user manual or google which one is acc and ground.
this vid would have been much better if you spoke slower and more clearly.
K Kostas Idk most people that commented said it was fine and appreciated the video. UA-cam has a slow motion feature for playback. Just use that shouldn’t be an issue.
Yeah I cant shove shit into my harness..
You can always splice and solder or use the butt pluggers. There are 3 methods to connecting wires.