ESP32-CAM with Telegram: Take Photos, Control Outputs, Sensor Readings and Motion Notifications
Вставка
- Опубліковано 11 лип 2024
- PCBWay is a full feature Printed Circuit Board manufacturing service. Get 10 boards for ~$5: randomnerdtutorials.com/pcbway/ Full Project (Gerber files + schematics + source code) ► RandomNerdTutorials.com/esp32...
In this project we'll create a PCB shield for the ESP32-CAM AI-Thinker board with a PIR motion sensor, a BME280 temperature, humidity and pressure sensor and some additional exposed pins. We'll create a Telegram bot for the ESP32-CAM that allows you to control your board from anywhere to request a photo, sensor readings or control the flash. Additionally, you'll receive a notification with a new photo whenever motion is detected.
Like my page on Facebook:
/ randomnerdtutorials
Follow me on twitter:
/ ruisantosdotme
Subscribe for more projects like this!
bit.ly/subscribeRNT - Наука та технологія
You can find all Project details (Gerber files + schematics + source code) on my blog ► RandomNerdTutorials.com/esp32-cam-shield-pcb-telegram/
Can pcbway make me an esp32 shield with a pin connectors and a switch that grounds gpio1, maybe even terminal blocks? I mean do they just do the pcb or will they add components?
Can we have a live video feed ?
Fantastic little home security project ! Thank you !
nice Rui well done. Just ordered everything
Perfect Rui as usual!! Obrigado.
amazing tutorial!
I just miss words with delight at how fantastic job you are doing.
Personally, I am looking for very similar solutions because they simply interest me very much, probably thanks to you I will spend long hours implementing them into my project.
I am waiting for more similar ones because I see that we have similar ideas, but I finish the ideas because I cannot implement them.
super project !!! thank for sharing your knowledge
Absolutely great, THANKS!
Great video mate!
Thanks for watching!
Great work as always. Greetings from 🇮🇹
Thanks, I'm glad you enjoyed it!
very nice project, thanks for sharing
Great project! Love this.
You're welcome! Thanks for watching
Thanks for sharing your work! 👍
You're welcome! Thanks for watching
Awesome project , thank you for sharing
Thanks for watching!
Parabéns pelo projeto Rui!
Obrigado, fico contente por gostar. Cumprimentos
Obrigado Rui, e sucesso.
Hi Rui, thanks for the great project and the video. I'm only wondering, why the PIR is opposite to the flashlight and the camera, if the camera is used with a logger ribbon.
Awesome video
Thanks for watching!
Excellent 👍
Thanks for watching!
Good job santos..
Thanks for watching
Gracias Rui!!!
You're welcome! Thanks for watching!
Hi and thanks for this sharing. The circuit is working flawlessly . BTW i have a question : What is the current consumption of this circuit and is there a way to put the ESP32 in sleep mode and to wake it up when a motion is detected in order to allow longer battery using time? Thanks.
Hi and thanks for this great project.
i would like to used a Normally open micro Switch to trigger the even of sending the photo.
how can i use it instead of the motion sensor.
should i connect the 2 leads from the microswitch to where the yellow and black connections are on the motion sensor.
Who's the cute girl at 8:28? 😁 Happy New Year, Rui and Sara!🥳
Hi, Dear Mr Santos I
I would like to thank you for sharing your fabulous project. I have constructed the same but only with PIR sensor and not BME. The circuit is working fine but when flash is turned on it keeps on and again /flash command is to be given to turn it off. Kindly suggest that it flashes for a couple of seconds and auto turn off.
I appreciate your time and efforts.
Regards
Hey, ultimate newbie here with a question. Why don't you need resistors on this project, while you use them on your previous one, where you also build an ESP32-CAM with a PIR sensor (video title: ESP32-CAM PIR Motion Detector with Photo Capture (saves to microSD card))?
great work Mr. Santos but I have small issues, when I put and object in front of the camera and capture then remove the object and capture again, I still find the object in the picture, unless after 4 captures before it update to new picture without the object....is it a known issue?
Hi, how can I Edit the code so it will send me a video loop when it detect motion?
awesom sir......but can you replace the wifi ssid and connectivity from wifi to SIM 800l or SIM 900?...i will appreciate , because iam need that for my project on wEST bORNEO, and far away from every where...
what about the video recording in telegram?
is that possible?
Prezado Rui, na parte das vezes no envio da foto para o Telegram dá Timeout, as vezes a foto é enviada com sucesso. Por que será que isso ocorre ?
Hello, nice video.How to send the alert to several people?
What wii do for saving some peoples images and their names first and after when the same peoples detected by the sensor, their photo with name will sent to telegram.is there any possibility. Can you replay??? 🙏
Muito legal!!!
Fico contente que tenha gostado. Obrigado por assistir!
Rui boa tarde!! Montei o meu ontem !! Impressionante o funcionamento !!! Obrigado por disponibilizar o projeto!!. Quero fazer uma adaptação na campainha de casa. Quando tocarem ele envia uma foto de quem está lá fora !! Qualquer novidade lhe envio informações!! Obrigado mais uma vez !!
Can this be modified to work with multiple esp32-cam units?
I WANT TO BUY THIS! HELP ME PLEASE.
I CANNOT SEE GOOD. SORRY ALL CAPS
YOU SHOW WATERPROOF CONTAINER. WHERE CAN I GET THAT?
Can it run off battery? Can u show attaching battery?
I need this at end of driveway.
If good I will buy 20 of them!
I need because I am disabled.
Please respond.
pir motion detect and telegram notify and how to apply sd card video recording code?
How to add automatic door open or close with telegram in this project
hello and how to make it possible to enable and disable the motion sensor via telegrams
how to set it to take pictures with flash, please
Thanks bro
How can i add an alarm system in the project and in the telegram app
so how can i key in the wifi and telegram credentials without hand coding again if i want to give a friend the project???? i would be very happy if you respond
Is it possible to make this project without the esp shield?
Please help me how can add face recognition in this project.. is there any possibility to add face recognition and send photo with name of recognized human. Please can you explain
Hi, I make it and this is the nice project and work perfect , but after one day the esp32 send pictures continues to telegram every 15 seconds without any motion, can you advise me to repair it
hi Rui,how r you, can you tell me about telegram chat id will be same for all other project, if i add diff project ,only token will be changed. pl rply
Hello sir, It's print on the serial monitor but on the telegram there's no any messages popping up
How much access does this Telegram App have on the phone. It sounds like another whattsapp, which is better encrypted. It also looks like it just had its first stable release for android two weeks ago. Just don't want to download something that is constantly trying to update itself and crashing the phone.
Rui, Are you able to capture a full 2mp photo?
The camera resolution can be set up to UXGA 1600x1200.
Can you create video of how to control more ESP using MQTT ?
Yes, I have that project in my to do list, but I can't promise when will it be available. Thanks for the suggestion!
please help with the problem
c:\Users
ike\Documents\Arduino\libraries\ESPAsyncTCP-master\src\SyncClient.cpp:25:24 : fatal error: abort.h: Compilation of such file or directory
is not completed.
exit status 1
Compilation error: exit status 1
great video.
I only wish that there was a free app and not one that gives away all my information to big tech.
hii
Why my web sever is not working?
There is a bug in your code somewhere here client.setCACert(TELEGRAM_CERTIFICATE_ROOT);
Thank you for letting me know, but last week we've updated the code. You can find the working code at: randomnerdtutorials.com/esp32-cam-shield-pcb-telegram/
@ 8:22 pretty girl.
A useless project. It only works on a local Wi-Fi network. Make a project that will work via the global internet then it will be useful and very cool.
What do you mean? It seems like you didn't understand how the project works. This project works from anywhere in the world. You just need the Telegram app and any Internet or Data connection to access it
@@RuiSantosdotme If so, that's cool. Sorry for the confusion.
Would be possible do this project with sim800l ?
how to set it to take pictures with flash, please
hello and how to make it possible to enable and disable the motion sensor via telegrams